Adding devicetree and linux-arm-kernel lists based on feedback on IRC... On Tue, Jun 10, 2014 at 12:46 PM, Jason Kridner <jkridner@xxxxxxxxx> wrote: > I'd like to discuss moving our current library of cape devicetree > overlay sources into a single tree, including the boot .dtb files for > BeagleBoard.org boards and moving towards enabling as much of the cape > support into a single boot-time .dtb file with an approach similar to > the cape-universal overlay > (https://github.com/cdsteinkuehler/beaglebone-universal-io), but not > in an overlay. > > First of all, I want to note this doesn't change my view on the > importance of mainline support for devicetree overlays. They are still > absolutely critical and highly useful, solving problems that cannot be > solved through boot-time devicetrees. I'm simply looking for an > approach that will complement the availability of overlays and provide > the best user experience. > > Robert has been talking about the actions required to clean-up Debian > Jessie support in another thread > (https://groups.google.com/d/msg/beagleboard/2b8rArtfABY/A8d1JzmJa4IJ) > and I suggested we should add a bit of a detour by cleaning up the > cape support for the mainline kernel and switching away our primary > process of supporting capes from using overlays to using a single > devicetree file provided at boot. I promised a pull-request and hadn't > gotten around to sending it until now (below). No architecture changes > have been made in my pull-request, just bringing in the kernel > devicetree source history. This suggestion is based on several > assumptions, any number of which might be wrong. > > The assumptions (for which I'm looking for feedback/corrections): > * The overlays pretty much all need to be compiled into the kernel if > they are going to be loaded using kernel command-line arguments or > /etc/capemgr for the majority of distros. While many cape devicetree > use cases are perfectly happy with loading at run-time rather than > boot-time, it seems there should be a mechanism for pushing cape > support into the category of being available at boot-time across > distributions. > * The devicetree sources, including the primary boot .dts files, will > eventually be removed from the kernel source tree. I'm not too sure if > and when it'll really happen, but starting up a project to maintain > the definitive beagleboard.org board devicetree files outside the > kernel seems to make sense. Given the interdependency of the boot .dtb > and the overlay .dtbo files, combining them into a single repository > where every distribution can pick them up seems like a natural and > obvious choice. There are of course some dependencies on kernel > versions, but I believe most of those have settled out by now and we > should be OK moving forward. > * There seems to be little or no interest in my previous proposal to > use cape EEPROMs to store the overlay fragments. Given some churn in > the devicetree node definitions, it is likely this would have failed > in bad ways anyway. It seems mostly reasonable to expect users to > update their kernel and firmware to gain support for new add-on > hardware and we mostly try to avoid regressions (with the seemingly > ever-living exception of 3D graphics support), so I think I'm better > aligned with the community to drop my older suggestion. Some people, > including CircuitCo, are building capes without configuration EEPROMs > now, so a different recommended mechanism seems like a requirement. > * With the patches in our vendor 3.8 kernels and with all recent > mainline kernels, performing userspace muxing operations has become > easy again. It seems to be possible to turn on drivers not currently > in use without an unacceptable level of bloat or conflict. This has > been partially proven out using Charles' universal cape > (https://github.com/cdsteinkuehler/beaglebone-universal-io), though I > still have some concerns about conflicts. The result might be that > there is still some number of overlays, but the approach of minimizing > the overlays and instead relying on the existing loading/unloading > mechanisms of the mainline drivers as much as possible feels right to > me. > * It will still be some time before devicetree overlay support is > adopted in the mainline kernel. While I still see a strong need to > have devicetree overlay support and CapeMgr in the mainline, the > desire here is to optimize the user experience in the shortest term > possible. Users get really confused by the errors that get generated > by loading incorrect devicetree overlays and it is always nice when > you can avoid confusing users. > > My suggestion is: > * Maintain the source for .dtb and .dtbo files for all BeagleBoard.org > boards at http://github.com/beagleboard/devicetree-source, overriding > the sources in the mainline kernel when performing kernel builds. We > can host pre-built .dtb and .dtbo files at a normailzed location > outside the source repository for those that don't want to perform the > builds, since I don't believe the binary format is changing any time > soon other than the overlay support we utilize. Any patches accepted > into mainline as long as these files still exist there as well should > be merged to try to keep these in-line as long as possible, > anticipating eventual removal from mainline. > * Have cape makers submit pull requests to have their cape enabled in > the single boot-time devicetree overlay for each board they support. > The base drivers should be enabled at the earliest point where they > don't cause a conflict, minimizing what gets put into their overlays. > The final mux configuration and other points of conflict should be > kept in a board-specific overlay to make that configuration available > at boot. If the cape is disabled on the kernel command-line, the > kernel doesn't include CapeMgr support, or the board doesn't include a > configuration EEPROM, users would still have the ability to perform > run-time userspace mux configuration without CapeMgr unless > conflicting drivers need to be loaded. > > Alternatively, if we don't think this is where things belong, perhaps > we could try to move all of this into the u-boot sources, though > people using other bootloaders might not find this the most useful > approach. > > The pull request for http://github.com/beagleboard/devicetree-source: > > The following changes since commit a524bf5d5e173795ce4cb214280f304588b1d78d: > > capes: add BB-VIEW-LCD4-01-00A0 & BB-VIEW-LCD7-01-00A0 (2014-05-29 > 15:59:31 -0500) > > are available in the git repository at: > > git@xxxxxxxxxx:jadonk/cape-firmware master > > for you to fetch changes up to 9de20db80056b72d6e1f61b68447ba8f2d12cf9c: > > Beagle DTS: remove deleted files from Makefile (2014-06-02 12:35:28 -0400) > > ---------------------------------------------------------------- > > [...] Too many changes to list bringing in kernel history. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
