As per the Final production Data Manual for OMAP5432, SWPS050F(APRIL 2014) There are only two OPPs - 1GHz and 1.5GHz. the older OPP_LOW has been completely descoped. The Nominal voltages are still correct though. However, expectation for final production configuration is operation with Adaptive Body Bias (ABB) and Adaptive Voltage Scaling Class 0 operation. There are no IDcode or version change information encoded to programmatically detect this and software is supposed to NOT use OPP_LOW(500MHz) anymore for all devices (legacy and production samples). Signed-off-by: Nishanth Menon <nm@xxxxxx> --- arch/arm/boot/dts/omap5.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3bfda16..a4ed549 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -45,7 +45,6 @@ operating-points = < /* kHz uV */ - 500000 880000 1000000 1060000 1500000 1250000 >; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
