Re: [alsa-devel] [PATCH 00/19] Rework OMAP4+ HDMI audio support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17 May 2014 10:51, Joachim  Eastwood <manabian@xxxxxxxxx> wrote:
> On 14 May 2014 18:25, Joachim  Eastwood <manabian@xxxxxxxxx> wrote:
>> On 14 May 2014 12:02, Jyri Sarha <jsarha@xxxxxx> wrote:
>>> On 05/13/2014 12:13 AM, Joachim Eastwood wrote:
>>>>
>>>> On 12 May 2014 11:12, Jyri Sarha <jsarha@xxxxxx> wrote:
>>>
>>> ...
>>>
>>>>
>>>> hey, this worked straight away :)
>>>>
>>>> But there seems to be something wrong with the channel mapping.
>>>>
>>>> For stereo (speaker-test -c 2) the mapping is correct.
>>>>
>>>> But for -c 4 and -c 8 it gets weird:
>>>> speaker-test -c 4 -s X # where X is 1-4
>>>> 1: Front Left is Rear Left
>>>> 2: Front Right is Rear Right
>>>> 3: Rear Right is Front Right
>>>> 4: Rear Left is Front Left
>>>>
>>>> speaker-test -c 8 -s X # where X is 1-8
>>>> 1: Front Left is Rear Left
>>>> 2: Center is Rear Left
>>>> 3: Front Right is Rear Right
>>>> 4: Side Right is Front Right
>>>> 5: Rear Right is silent
>>>> 6: Rear Left is Center
>>>> 7: Side Left is Front Left
>>>> 8: LFE - Rear Right
>>>>
>>>> I think you need to check what channel order ALSA expects. I believe
>>>> speaker-test does the right thing on my HTPC normally connected to my
>>>> receiver.
>>>>
>>>
>>> I checked the implementation and there was indeed something weird there, but
>>> the implementation can not explain the FL and FR channels jumping around. FL
>>> and FL should always be the first two channels in all configurations and the
>>> implementation does not touch them.
>>>
>>> The implementation uses 8ch HDMI setup for anything above 2ch with "Audio
>>> InfoFrame Data Byte 4" set to 0x13. According to CEA-861 specs this means
>>> following channel order: FL, FR, LFE, FC, RL, RR, RLC, RRC
>>>
>>> This is a closest match to ALSA 8ch mapping (according to
>>> sound/core/pcm_lib.c) which is: FL, FR, FC, LFE, RL, RR, SL, SR
>>
>> hm, okey. I haven't look at the code but it do seem strange. But with
>> speaker-test -c 4 the front and back are surely swapped here.
>>
>> I'll do some more testing and also check with my HTPC. btw, I only
>> have a 5.1 setup over here so I can't test all the discrete channels.
>>
>>> Current implementation has FLE and FC channels correctly swapped, but it
>>> shifts them to last two channels and RL, RR, SL, SR are shifted down to fill
>>> the place. This is all wrong and I'll try to come up with a fix for that.
>>> Unfortunately I can not test anything beyond 2 ch myself so I would need
>>> someone to volunteer to test my patch.
>>
>> I have the dev kit setup up over here so I can test your patches.
>
> I did some more testing over here.
>
> My HTPC (nVidia ION2 based) works good with speaker-test and all
> channels are where they are suppose to be.
>
> On the OMAP4 board I tried doing: "while true; do speaker-test -c 4 -s
> 1; done" and this had an interesting effect.
> Most of the time FL (Front Left) is swapped with BL (Back Left) but
> about every 10th time the sound comes out in the FL speaker... So
> there something weird going on here. Same story for the right channel.
>
> I also noticed that HDMI doesn't always work on boot up, it sometimes fail with:
> [ 193.985565] omapdss_hdmi 58006000.encoder: audio not supported
> [ 193.985565] omapdss_hdmi 58006000.encoder: ASoC: can't open
> interface 58006000.encoder: -19
>
> But after replugging the HDMI connector a couple of times it starts to work.
>
> I'll see if I can try with an old TI OMAP4 kernel (3.4) and see how that works.

On the 3.4 Variscite kernel:
Linux version 3.4.0-1489-omap4 (uri@pluto) (gcc version 4.6.3
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #27 SMP PREEMPT Sun Apr 7 13:27:10
IDT 2013
git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git +
Variscite vendor patches

Both speaker-test -c 4 and -c 8 works. All channels are where they are
suppose to be.

Hot plugging is broken, though. So the HDMI must be connected on boot,
but that might be the Variscite board setup.

regards
Joachim Eastwood
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux