[PATCH 4/7] mfd: twl4030-power: Add recommended idle configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



These settings are based on the "Recommended Sleep Sequences for
the Zoom Platform" pdf at:

http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf

These settings assume most of the regulators are under control of
Linux, and twl4030 only cuts off VDD1 and VDD2 during off-idle as
Linux cannot do it.

For any board specific changes to these, let's patch them in as
changes to the generic data in the follow-up patches. This keeps
the board specific changes small.

Note that this does not consider the twl5030 errata 27 and 28.
That can be added later on after it has been tested. For more
information about errata 27 and 28, please see:

https://github.com/openembedded/openembedded/blob/master/recipes/linux/linux-omap-2.6.39/mfd/0012-MFD-TWL4030-workaround-changes-for-Erratum-27.patch

Cc: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 .../devicetree/bindings/mfd/twl4030-power.txt      |   4 +
 drivers/mfd/twl4030-power.c                        | 103 +++++++++++++++++++++
 2 files changed, 107 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index b906116..bbd6603 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -8,10 +8,14 @@ Required properties:
 - compatible : must be one of the following
 	"ti,twl4030-power"
 	"ti,twl4030-power-reset"
+	"ti,twl4030-power-idle"
 
 The use of ti,twl4030-power-reset is recommended at least on
 3530 that needs a special configuration for warm reset to work.
 
+When using ti,twl4030-power-idle, the TI recommended configuration
+for idle modes is loaded to the tlw4030 PMIC.
+
 Optional properties:
 - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
 		   SLEEP-to-OFF transition when the system poweroffs.
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index b61b725..39eeee2 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -139,19 +139,32 @@ enum {
 	TWL_REMAP_ACTIVE = 9,
 };
 
+#define TWL_DEV_GRP_P123	(DEV_GRP_P1 | DEV_GRP_P2 | DEV_GRP_P3)
 #define TWL_RESOURCE_ON(res)						\
 	{ MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), 0x02 }
 #define TWL_RESOURCE_OFF(res)						\
 	{ MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_OFF), 0x02 }
 #define TWL_RESOURCE_RESET(res)						\
 	{ MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_WRST), 0x02 }
+#define TWL_RESOURCE_SET_ACTIVE(res, state)			       	\
+	{ MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), (state) }
 #define TWL_RESOURCE_GROUP_RESET(group, type1, type2)			\
 	{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2),	\
 		RES_STATE_WRST), 0x02 }
+#define TWL_RESOURCE_GROUP_SLEEP(group, type, type2)			\
+	{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2),		\
+		RES_STATE_SLEEP), 0x02 }
+#define TWL_RESOURCE_GROUP_ACTIVE(group, type, type2)			\
+	{ MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2),		\
+		RES_STATE_ACTIVE), 0x02 }
 #define TWL_REMAP_SLEEP(res, devgrp, typ, typ2)				\
 	{ .resource = (res), .devgroup = (devgrp),			\
 	  .type = (typ), .type2 = (typ2),				\
 	  .remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_SLEEP, }
+#define TWL_REMAP_OFF(res, devgrp, typ, typ2)				\
+	{ .resource = (res), .devgroup = (devgrp),			\
+	  .type = (typ), .type2 = (typ2),				\
+	  .remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_OFF, }
 
 static int twl4030_write_script_byte(u8 address, u8 byte)
 {
@@ -628,11 +641,101 @@ static struct twl4030_power_data omap3_reset = {
 	.resource_config	= omap3_rconfig,
 };
 
+/* Recommended generic default idle configuration for off-idle */
+
+/* Broadcast message to put res to sleep */
+static struct twl4030_ins omap3_idle_sleep_on_seq[] = {
+	TWL_RESOURCE_GROUP_SLEEP(RES_GRP_ALL, RES_TYPE_ALL, 0),
+};
+
+static struct twl4030_script omap3_idle_sleep_on_script = {
+	.script	= omap3_idle_sleep_on_seq,
+	.size	= ARRAY_SIZE(omap3_idle_sleep_on_seq),
+	.flags	= TWL4030_SLEEP_SCRIPT,
+};
+
+/* Broadcast message to put res to active */
+static struct twl4030_ins omap3_idle_wakeup_p12_seq[] = {
+	TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0),
+};
+
+static struct twl4030_script omap3_idle_wakeup_p12_script = {
+	.script	= omap3_idle_wakeup_p12_seq,
+	.size	= ARRAY_SIZE(omap3_idle_wakeup_p12_seq),
+	.flags	= TWL4030_WAKEUP12_SCRIPT,
+};
+
+/* Broadcast message to put res to active */
+static struct twl4030_ins omap3_idle_wakeup_p3_seq[] = {
+	TWL_RESOURCE_SET_ACTIVE(RES_CLKEN, 0x37),
+	TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0),
+};
+
+static struct twl4030_script omap3_idle_wakeup_p3_script = {
+	.script	= omap3_idle_wakeup_p3_seq,
+	.size	= ARRAY_SIZE(omap3_idle_wakeup_p3_seq),
+	.flags	= TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_script *omap3_idle_scripts[] = {
+	&omap3_idle_wakeup_p12_script,
+	&omap3_idle_wakeup_p3_script,
+	&omap3_wrst_script,
+	&omap3_idle_sleep_on_script,
+};
+
+/*
+ * Recommended configuration based on "Recommended Sleep
+ * Sequences for the Zoom Platform":
+ * http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf
+ */
+static struct twl4030_resconfig omap3_idle_rconfig[] = {
+	TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1),
+	TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0),
+	TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2),
+	TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2),
+	TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2),
+	TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2),
+	TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1),
+	TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1),
+	TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0),
+	/* Resource #20 USB charge pump skipped */
+	TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1),
+	TWL_REMAP_SLEEP(RES_NRES_PWRON, TWL_DEV_GRP_P123, 0, 1),
+	TWL_REMAP_SLEEP(RES_CLKEN, TWL_DEV_GRP_P123, 3, 2),
+	TWL_REMAP_SLEEP(RES_SYSEN, TWL_DEV_GRP_P123, 6, 1),
+	TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, 0, 2),
+	TWL_REMAP_SLEEP(RES_32KCLKOUT, TWL_DEV_GRP_P123, 0, 0),
+	TWL_REMAP_SLEEP(RES_RESET, TWL_DEV_GRP_P123, 6, 0),
+	TWL_REMAP_SLEEP(RES_MAIN_REF, TWL_DEV_GRP_P123, 0, 0),
+	{ /* Terminator */ },
+};
+
+static struct twl4030_power_data omap3_idle = {
+	.scripts		= omap3_idle_scripts,
+	.num			= ARRAY_SIZE(omap3_idle_scripts),
+	.resource_config	= omap3_idle_rconfig,
+};
+
 static struct of_device_id twl4030_power_of_match[] = {
 	{
 		.compatible = "ti,twl4030-power-reset",
 		.data = &omap3_reset,
 	},
+	{
+		.compatible = "ti,twl4030-power-idle",
+		.data = &omap3_idle,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
-- 
1.8.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux