On 05/13/2014 03:24 PM, George Cherian wrote: > Basically, there are 2 types of babble conditions. > 1) Transient babble condition - which could be recovered from without an > IP reset . > 2) Babble condition - which could be recovered from only by doing an IP > reset. Ok, thanks for the explanation. > Looks like you are always hitting case 2 (Most times am also hitting the > same). Seems like, yes. > There is no 100% reliable method to force it to happen. Following is > my setup , > I have a HUB with 4 devices connected , which gives me a Babble interrupt > on both connects and disconnects ( Not always though). I also get them at disconnects, but only with one specific USB device. But as I don't ever see case 1) above, I can't say if your approach works. What I can say, though, is that your patches don't break the recovery from babble conditions that I experienced :) Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
