On 05/13/2014 05:21 AM, Tony Lindgren wrote: > * Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx> [140505 11:11]: >> On Mon, May 05, 2014 at 05:39:43PM +0800, Alex Shi wrote: >>> I keep seeing the RCU stall problem on panda board from 3.10 kernel to latest upstream kernel >>> and google find some one report it before: https://lkml.org/lkml/2012/9/20/519 >>> >>> Is it the hardware issue or a real software problem? >> >> I cannot distinguish between hardware and software from the trace below, >> but given that you are also seeing a soft lockup, either way you do >> appear to have a real problem as opposed to an RCU CPU stall warning >> false positive. > > Looks like you have CPU_IDLE enabled on panda. Hangs with current linux > next with CPU_IDLE are currently being discussed on the linux-omap list > in thread "omap4-panda-es boot issues with v3.15-rc4" > > I've seen occasional system hangs, and I've also noticed that doing > ctrl-a-f h or ctrl-a-f l for sysrq backtrace can unlock the system > producing similar errors to the below. > Thanks a lot for the info. In fact, the oops keeps in upstream kernel from 3.10 to latest. > Regards, > > Tony > >>> 95.519653] INFO: rcu_sched self-detected stall on CPU^M >>> [ 95.519866] 1: (1 GPs behind) idle=2e7/1/0 softirq=4404/4405 ^M >>> [ 95.526489] INFO: rcu_sched detected stalls on CPUs/tasks:^M >>> [ 95.526489] 1: (1 GPs behind) idle=2e7/1/0 softirq=4404/4405 ^M >>> [ 95.526489] (detected by 0, t=4229 jiffies, g=800, c=799, q=440)^M >>> [ 95.526519] Task dump for CPU 1:^M >>> [ 95.526519] swapper/1 R running 0 0 1 0x00000000^M >>> [ 95.559844] (t=4229 jiffies g=800 c=799 q=440)^M >>> [ 95.564727] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc4 #93^M >>> [ 95.571502] [<c00133fd>] (unwind_backtrace) from [<c001076d>] (show_stack+0x11/0x14)^M >>> [ 95.579711] [<c001076d>] (show_stack) from [<c0570465>] (dump_stack+0x75/0x88)^M >>> [ 95.587371] [<c0570465>] (dump_stack) from [<c0084383>] (rcu_check_callbacks+0x353/0x79c)^M >>> [ 95.596038] [<c0084383>] (rcu_check_callbacks) from [<c003e99f>] (update_process_times+0x33/0x4c)^M >>> [ 95.605438] [<c003e99f>] (update_process_times) from [<c008e5a3>] (tick_sched_handle.isra.18+0x1f/0x48)^M >>> [ 95.615386] [<c008e5a3>] (tick_sched_handle.isra.18) from [<c008e609>] (tick_sched_timer+0x3d/0x5c)^M >>> [ 95.624969] [<c008e609>] (tick_sched_timer) from [<c0051a23>] (__run_hrtimer+0x67/0x310)^M >>> [ 95.633544] [<c0051a23>] (__run_hrtimer) from [<c00525fd>] (hrtimer_interrupt+0xe1/0x214)^M >>> [ 95.642211] [<c00525fd>] (hrtimer_interrupt) from [<c008cecb>] (tick_receive_broadcast+0x1f/0x30)^M >>> [ 95.651611] [<c008cecb>] (tick_receive_broadcast) from [<c0011e4f>] (handle_IPI+0xb3/0x120)^M >>> [ 95.660461] [<c0011e4f>] (handle_IPI) from [<c00085e5>] (gic_handle_irq+0x51/0x54)^M >>> [ 95.668487] [<c00085e5>] (gic_handle_irq) from [<c057603f>] (__irq_svc+0x3f/0x64)^M >>> [ 95.676391] Exception stack(0xee0dbf10 to 0xee0dbf58)^M >>> [ 95.681762] bf00: 00000001 00000001 00000000 ee0d8c40^M >>> [ 95.690429] bf20: 3c6bd296 00000016 3c6f8c43 00000016 eefab540 c08e0c84 00000000 c0fc7114^M >>> [ 95.699066] bf40: 00000010 ee0dbf58 c006ef4d c0443890 40000033 ffffffff^M >>> [ 95.706085] [<c057603f>] (__irq_svc) from [<c0443890>] (cpuidle_enter_state+0xc0/0xc4)^M >>> [ 95.714477] [<c0443890>] (cpuidle_enter_state) from [<c0444d11>] (cpuidle_enter_state_coupled+0xe1/0x290)^M >>> [ 95.724639] [<c0444d11>] (cpuidle_enter_state_coupled) from [<c0067cd1>] (cpu_startup_entry+0x1a5/0x494)^M >>> [ 95.734680] [<c0067cd1>] (cpu_startup_entry) from [<80008685>] (0x80008685)^M >>> [ 95.742095] BUG: soft lockup - CPU#1 stuck for 40s! [swapper/1:0]^M >>> [ 95.748535] Modules linked in:^M >>> [ 95.751770] irq event stamp: 128730^M >>> [ 95.755462] hardirqs last enabled at (128727): [<c044388f>] cpuidle_enter_state+0xbf/0xc4^M >>> [ 95.764221] hardirqs last disabled at (128728): [<c0576033>] __irq_svc+0x33/0x64^M >>> [ 95.772064] softirqs last enabled at (128730): [<c00386cd>] irq_enter+0x59/0x60^M >>> [ 95.779907] softirqs last disabled at (128729): [<c00386ba>] irq_enter+0x46/0x60^M >>> [ 95.787750] ^M >>> >>> >>> my RCU and IDLE related kernel config as blow: >>> >>> CONFIG_TREE_RCU=y >>> CONFIG_RCU_STALL_COMMON=y >>> CONFIG_RCU_FANOUT=32 >>> CONFIG_RCU_FANOUT_LEAF=16 >>> CONFIG_TREE_RCU_TRACE=y >>> CONFIG_PROVE_RCU=y >>> CONFIG_PROVE_RCU_REPEATEDLY=y >>> CONFIG_SPARSE_RCU_POINTER=y >>> CONFIG_RCU_CPU_STALL_TIMEOUT=21 >>> CONFIG_RCU_CPU_STALL_INFO=y >>> CONFIG_RCU_TRACE=y >>> alexs@alex-panda:~$ cat /proc/config.gz | gunzip | grep IDLE >>> CONFIG_NO_HZ_IDLE=y >>> CONFIG_GENERIC_SMP_IDLE_THREAD=y >>> CONFIG_GENERIC_IDLE_POLL_SETUP=y >>> CONFIG_CPU_IDLE=y >>> CONFIG_CPU_IDLE_GOV_LADDER=y >>> CONFIG_CPU_IDLE_GOV_MENU=y >>> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y >>> >>> -- >>> Thanks >>> Alex >>> >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- Thanks Alex -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
