* Florian Vaussard <florian.vaussard@xxxxxxx> [140311 05:24]: > Hi, > > This series adds the support for 5 new expansion boards from Gumstix: > - Palo43 > - Gallop43 > - Chestnut43 > - Alto35 > - Summit > > The 1st patch is a preparatory work, in order to factorize some > peripherals that are common to most Gumstix expansion boards. Patch 2 > adds the support for an accelerometer that is present on most boards. > > Palo43, Gallop43 and Chestnut43 are all pretty similar. I tested > on a Gallop43 (with both OMAP35xx and OMAP36xx Overo). > > Alto35 is slightly different. Again, I tested with both OMAP35xx and > OMAP36xx Overo. > > Summit is pretty similar to Tobi. I do not have a Summit at hand, > but given the similarity with Tobi, it should work fine. > > To avoid unnecessary duplications, I put all the common stuff for each > board inside an omap3-overo-xxx-common.dsti include file. By doing so, > I can have minimal SoC-specific omap3-overo-xxx.dts (omap34xx based) > and omap3-overo-storm-xxx.dts (omap36xx based) device trees. > > This series depends on my previous Overo series [1]. A complete testing > tree (including the graphics support, soon to be posted) is available > at [2]. Thanks, applying the whole series into omap-for-v3.15/dt-overo. As it's this close to the merge window, no guarantees anything will get pulled in though. Regards, Tony > [1] http://thread.gmane.org/gmane.linux.ports.arm.omap/111558 > [2] https://github.com/vaussard/linux.git (overo/for-3.15/review1) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
