Hi, This series adds the support for 5 new expansion boards from Gumstix: - Palo43 - Gallop43 - Chestnut43 - Alto35 - Summit The 1st patch is a preparatory work, in order to factorize some peripherals that are common to most Gumstix expansion boards. Patch 2 adds the support for an accelerometer that is present on most boards. Palo43, Gallop43 and Chestnut43 are all pretty similar. I tested on a Gallop43 (with both OMAP35xx and OMAP36xx Overo). Alto35 is slightly different. Again, I tested with both OMAP35xx and OMAP36xx Overo. Summit is pretty similar to Tobi. I do not have a Summit at hand, but given the similarity with Tobi, it should work fine. To avoid unnecessary duplications, I put all the common stuff for each board inside an omap3-overo-xxx-common.dsti include file. By doing so, I can have minimal SoC-specific omap3-overo-xxx.dts (omap34xx based) and omap3-overo-storm-xxx.dts (omap36xx based) device trees. This series depends on my previous Overo series [1]. A complete testing tree (including the graphics support, soon to be posted) is available at [2]. Regards, Florian [1] http://thread.gmane.org/gmane.linux.ports.arm.omap/111558 [2] https://github.com/vaussard/linux.git (overo/for-3.15/review1) Florian Vaussard (7): ARM: dts: overo: Create a file for common Gumstix peripherals ARM: dts: overo: Add LIS33DE accelerometer ARM: dts: Add support for the Overo Palo43 ARM: dts: Add support for the Overo Gallop43 ARM: dts: Add support for the Overo Alto35 ARM: dts: Add support for the Overo Chestnut43 ARM: dts: Add support for the Overo Summit arch/arm/boot/dts/Makefile | 10 +++ arch/arm/boot/dts/omap3-overo-alto35-common.dtsi | 77 ++++++++++++++++++ arch/arm/boot/dts/omap3-overo-alto35.dts | 22 +++++ .../boot/dts/omap3-overo-chestnut43-common.dtsi | 69 ++++++++++++++++ arch/arm/boot/dts/omap3-overo-chestnut43.dts | 38 +++++++++ .../boot/dts/omap3-overo-common-peripherals.dtsi | 94 ++++++++++++++++++++++ arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi | 57 +++++++++++++ arch/arm/boot/dts/omap3-overo-gallop43.dts | 38 +++++++++ arch/arm/boot/dts/omap3-overo-palo43-common.dtsi | 53 ++++++++++++ arch/arm/boot/dts/omap3-overo-palo43.dts | 38 +++++++++ arch/arm/boot/dts/omap3-overo-storm-alto35.dts | 21 +++++ arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts | 38 +++++++++ arch/arm/boot/dts/omap3-overo-storm-gallop43.dts | 38 +++++++++ arch/arm/boot/dts/omap3-overo-storm-palo43.dts | 38 +++++++++ arch/arm/boot/dts/omap3-overo-storm-summit.dts | 30 +++++++ arch/arm/boot/dts/omap3-overo-summit-common.dtsi | 31 +++++++ arch/arm/boot/dts/omap3-overo-summit.dts | 30 +++++++ arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 38 +-------- 18 files changed, 725 insertions(+), 35 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-overo-alto35-common.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-alto35.dts create mode 100644 arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-chestnut43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-gallop43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-palo43-common.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-palo43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-storm-alto35.dts create mode 100644 arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-storm-gallop43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-storm-palo43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-storm-summit.dts create mode 100644 arch/arm/boot/dts/omap3-overo-summit-common.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-summit.dts -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
