* Felipe Balbi <me@xxxxxxxxxxxxxxx> [081111 14:57]:
> From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
>
> Fix it by passing u32 into enable_reg and letting
> clock.c use OMAP1_IO_ADDRESS().
>
> This will probably be changed by a better solution
> later on, but at least we make it buildable again.
Huh? At least OSK builds and boots just fine here.
Have you tested this patch?
Tony
> Cc: Paul Walmsley <paul@xxxxxxxxx>
> Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
> ---
> arch/arm/mach-omap1/clock.c | 38 ++++++++--------
> arch/arm/mach-omap1/clock.h | 64 ++++++++++++++--------------
> arch/arm/plat-omap/include/mach/hardware.h | 2 +-
> 3 files changed, 52 insertions(+), 52 deletions(-)
>
> diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
> index 4d0c444..997cfda 100644
> --- a/arch/arm/mach-omap1/clock.c
> +++ b/arch/arm/mach-omap1/clock.c
> @@ -41,7 +41,7 @@ static void omap1_watchdog_recalc(struct clk * clk)
>
> static void omap1_uart_recalc(struct clk * clk)
> {
> - unsigned int val = __raw_readl(clk->enable_reg);
> + unsigned int val = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
> if (val & clk->enable_bit)
> clk->rate = 48000000;
> else
> @@ -372,14 +372,14 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
> {
> unsigned int val;
>
> - val = __raw_readl(clk->enable_reg);
> + val = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
> if (rate == 12000000)
> val &= ~(1 << clk->enable_bit);
> else if (rate == 48000000)
> val |= (1 << clk->enable_bit);
> else
> return -EINVAL;
> - __raw_writel(val, clk->enable_reg);
> + __raw_writel(val, OMAP1_IO_ADDRESS(clk->enable_reg));
> clk->rate = rate;
>
> return 0;
> @@ -398,8 +398,8 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
> else
> ratio_bits = (dsor - 2) << 2;
>
> - ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
> - __raw_writew(ratio_bits, clk->enable_reg);
> + ratio_bits |= __raw_readw(OMAP1_IO_ADDRESS(clk->enable_reg)) & ~0xfd;
> + __raw_writew(ratio_bits, OMAP1_IO_ADDRESS(clk->enable_reg));
>
> return 0;
> }
> @@ -440,8 +440,8 @@ static void omap1_init_ext_clk(struct clk * clk)
> __u16 ratio_bits;
>
> /* Determine current rate and ensure clock is based on 96MHz APLL */
> - ratio_bits = __raw_readw(clk->enable_reg) & ~1;
> - __raw_writew(ratio_bits, clk->enable_reg);
> + ratio_bits = __raw_readw(OMAP1_IO_ADDRESS(clk->enable_reg)) & ~1;
> + __raw_writew(ratio_bits, OMAP1_IO_ADDRESS(clk->enable_reg));
>
> ratio_bits = (ratio_bits & 0xfc) >> 2;
> if (ratio_bits > 6)
> @@ -499,20 +499,20 @@ static int omap1_clk_enable_generic(struct clk *clk)
> if (clk->flags & ALWAYS_ENABLED)
> return 0;
>
> - if (unlikely(clk->enable_reg == NULL)) {
> + if (unlikely(clk->enable_reg == 0)) {
> printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
> clk->name);
> return -EINVAL;
> }
>
> if (clk->flags & ENABLE_REG_32BIT) {
> - regval32 = __raw_readl(clk->enable_reg);
> + regval32 = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
> regval32 |= (1 << clk->enable_bit);
> - __raw_writel(regval32, clk->enable_reg);
> + __raw_writel(regval32, OMAP1_IO_ADDRESS(clk->enable_reg));
> } else {
> - regval16 = __raw_readw(clk->enable_reg);
> + regval16 = __raw_readw(OMAP1_IO_ADDRESS(clk->enable_reg));
> regval16 |= (1 << clk->enable_bit);
> - __raw_writew(regval16, clk->enable_reg);
> + __raw_writew(regval16, OMAP1_IO_ADDRESS(clk->enable_reg));
> }
>
> return 0;
> @@ -523,17 +523,17 @@ static void omap1_clk_disable_generic(struct clk *clk)
> __u16 regval16;
> __u32 regval32;
>
> - if (clk->enable_reg == NULL)
> + if (clk->enable_reg == 0)
> return;
>
> if (clk->flags & ENABLE_REG_32BIT) {
> - regval32 = __raw_readl(clk->enable_reg);
> + regval32 = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
> regval32 &= ~(1 << clk->enable_bit);
> - __raw_writel(regval32, clk->enable_reg);
> + __raw_writel(regval32, OMAP1_IO_ADDRESS(clk->enable_reg));
> } else {
> - regval16 = __raw_readw(clk->enable_reg);
> + regval16 = __raw_readw(OMAP1_IO_ADDRESS(clk->enable_reg));
> regval16 &= ~(1 << clk->enable_bit);
> - __raw_writew(regval16, clk->enable_reg);
> + __raw_writew(regval16, OMAP1_IO_ADDRESS(clk->enable_reg));
> }
> }
>
> @@ -609,9 +609,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
>
> /* Is the clock already disabled? */
> if (clk->flags & ENABLE_REG_32BIT)
> - regval32 = __raw_readl(clk->enable_reg);
> + regval32 = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
> else
> - regval32 = __raw_readw(clk->enable_reg);
> + regval32 = __raw_readw(OMAP1_IOADRESS(clk->enable_reg));
>
> if ((regval32 & (1 << clk->enable_bit)) == 0)
> return;
> diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
> index 44eda0f..3f5fe43 100644
> --- a/arch/arm/mach-omap1/clock.h
> +++ b/arch/arm/mach-omap1/clock.h
> @@ -174,7 +174,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
> .parent = &ck_dpll1,
> .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
> ENABLE_REG_32BIT | RATE_PROPAGATES,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_CKOUT_ARM,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -188,7 +188,7 @@ static struct clk sossi_ck = {
> .parent = &ck_dpll1out.clk,
> .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
> ENABLE_REG_32BIT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
> + .enable_reg = MOD_CONF_CTRL_1,
> .enable_bit = 16,
> .recalc = &omap1_sossi_recalc,
> .set_rate = &omap1_set_sossi_rate,
> @@ -215,7 +215,7 @@ static struct arm_idlect1_clk armper_ck = {
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> CLOCK_IN_OMAP310 | RATE_CKCTL |
> CLOCK_IDLE_CONTROL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_PERCK,
> .rate_offset = CKCTL_PERDIV_OFFSET,
> .recalc = &omap1_ckctl_recalc,
> @@ -229,7 +229,7 @@ static struct clk arm_gpio_ck = {
> .name = "arm_gpio_ck",
> .parent = &ck_dpll1,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_GPIOCK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -242,7 +242,7 @@ static struct arm_idlect1_clk armxor_ck = {
> .parent = &ck_ref,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_XORPCK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -257,7 +257,7 @@ static struct arm_idlect1_clk armtim_ck = {
> .parent = &ck_ref,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_TIMCK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -272,7 +272,7 @@ static struct arm_idlect1_clk armwdt_ck = {
> .parent = &ck_ref,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_WDTCK,
> .recalc = &omap1_watchdog_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -300,7 +300,7 @@ static struct clk dsp_ck = {
> .parent = &ck_dpll1,
> .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> RATE_CKCTL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
> + .enable_reg = ARM_CKCTL,
> .enable_bit = EN_DSPCK,
> .rate_offset = CKCTL_DSPDIV_OFFSET,
> .recalc = &omap1_ckctl_recalc,
> @@ -324,7 +324,7 @@ static struct clk dspper_ck = {
> .parent = &ck_dpll1,
> .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> RATE_CKCTL,
> - .enable_reg = IOMEM(DSP_IDLECT2),
> + .enable_reg = DSP_IDLECT2,
> .enable_bit = EN_PERCK,
> .rate_offset = CKCTL_PERDIV_OFFSET,
> .recalc = &omap1_ckctl_recalc_dsp_domain,
> @@ -337,7 +337,7 @@ static struct clk dspxor_ck = {
> .name = "dspxor_ck",
> .parent = &ck_ref,
> .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
> - .enable_reg = IOMEM(DSP_IDLECT2),
> + .enable_reg = DSP_IDLECT2,
> .enable_bit = EN_XORPCK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_dsp_domain,
> @@ -348,7 +348,7 @@ static struct clk dsptim_ck = {
> .name = "dsptim_ck",
> .parent = &ck_ref,
> .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
> - .enable_reg = IOMEM(DSP_IDLECT2),
> + .enable_reg = DSP_IDLECT2,
> .enable_bit = EN_DSPTIMCK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_dsp_domain,
> @@ -402,7 +402,7 @@ static struct clk l3_ocpi_ck = {
> .name = "l3_ocpi_ck",
> .parent = &tc_ck.clk,
> .flags = CLOCK_IN_OMAP16XX,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
> + .enable_reg = ARM_IDLECT3,
> .enable_bit = EN_OCPI_CK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -413,7 +413,7 @@ static struct clk tc1_ck = {
> .name = "tc1_ck",
> .parent = &tc_ck.clk,
> .flags = CLOCK_IN_OMAP16XX,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
> + .enable_reg = ARM_IDLECT3,
> .enable_bit = EN_TC1_CK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -424,7 +424,7 @@ static struct clk tc2_ck = {
> .name = "tc2_ck",
> .parent = &tc_ck.clk,
> .flags = CLOCK_IN_OMAP16XX,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
> + .enable_reg = ARM_IDLECT3,
> .enable_bit = EN_TC2_CK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -457,7 +457,7 @@ static struct arm_idlect1_clk api_ck = {
> .parent = &tc_ck.clk,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_APICK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -472,7 +472,7 @@ static struct arm_idlect1_clk lb_ck = {
> .parent = &tc_ck.clk,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
> CLOCK_IDLE_CONTROL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_LBCK,
> .recalc = &followparent_recalc,
> .enable = &omap1_clk_enable_generic,
> @@ -503,7 +503,7 @@ static struct clk lcd_ck_16xx = {
> .name = "lcd_ck",
> .parent = &ck_dpll1,
> .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_LCDCK,
> .rate_offset = CKCTL_LCDDIV_OFFSET,
> .recalc = &omap1_ckctl_recalc,
> @@ -517,7 +517,7 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
> .parent = &ck_dpll1,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
> RATE_CKCTL | CLOCK_IDLE_CONTROL,
> - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
> + .enable_reg = ARM_IDLECT2,
> .enable_bit = EN_LCDCK,
> .rate_offset = CKCTL_LCDDIV_OFFSET,
> .recalc = &omap1_ckctl_recalc,
> @@ -535,7 +535,7 @@ static struct clk uart1_1510 = {
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
> ENABLE_REG_32BIT | ALWAYS_ENABLED |
> CLOCK_NO_IDLE_PARENT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
> + .enable_reg = MOD_CONF_CTRL_0,
> .enable_bit = 29, /* Chooses between 12MHz and 48MHz */
> .set_rate = &omap1_set_uart_rate,
> .recalc = &omap1_uart_recalc,
> @@ -551,7 +551,7 @@ static struct uart_clk uart1_16xx = {
> .rate = 48000000,
> .flags = CLOCK_IN_OMAP16XX | RATE_FIXED |
> ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
> + .enable_reg = MOD_CONF_CTRL_0,
> .enable_bit = 29,
> .enable = &omap1_clk_enable_uart_functional,
> .disable = &omap1_clk_disable_uart_functional,
> @@ -567,7 +567,7 @@ static struct clk uart2_ck = {
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
> ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
> + .enable_reg = MOD_CONF_CTRL_0,
> .enable_bit = 30, /* Chooses between 12MHz and 48MHz */
> .set_rate = &omap1_set_uart_rate,
> .recalc = &omap1_uart_recalc,
> @@ -583,7 +583,7 @@ static struct clk uart3_1510 = {
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
> ENABLE_REG_32BIT | ALWAYS_ENABLED |
> CLOCK_NO_IDLE_PARENT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
> + .enable_reg = MOD_CONF_CTRL_0,
> .enable_bit = 31, /* Chooses between 12MHz and 48MHz */
> .set_rate = &omap1_set_uart_rate,
> .recalc = &omap1_uart_recalc,
> @@ -599,7 +599,7 @@ static struct uart_clk uart3_16xx = {
> .rate = 48000000,
> .flags = CLOCK_IN_OMAP16XX | RATE_FIXED |
> ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
> + .enable_reg = MOD_CONF_CTRL_0,
> .enable_bit = 31,
> .enable = &omap1_clk_enable_uart_functional,
> .disable = &omap1_clk_disable_uart_functional,
> @@ -613,7 +613,7 @@ static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
> .rate = 6000000,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
> - .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
> + .enable_reg = ULPD_CLOCK_CTRL,
> .enable_bit = USB_MCLK_EN_BIT,
> .enable = &omap1_clk_enable_generic,
> .disable = &omap1_clk_disable_generic,
> @@ -625,7 +625,7 @@ static struct clk usb_hhc_ck1510 = {
> .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
> RATE_FIXED | ENABLE_REG_32BIT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
> + .enable_reg = MOD_CONF_CTRL_0,
> .enable_bit = USB_HOST_HHC_UHOST_EN,
> .enable = &omap1_clk_enable_generic,
> .disable = &omap1_clk_disable_generic,
> @@ -638,7 +638,7 @@ static struct clk usb_hhc_ck16xx = {
> /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
> .flags = CLOCK_IN_OMAP16XX |
> RATE_FIXED | ENABLE_REG_32BIT,
> - .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
> + .enable_reg = (OTG_BASE + 0x08), /* OTG_SYSCON_2 */
> .enable_bit = 8 /* UHOST_EN */,
> .enable = &omap1_clk_enable_generic,
> .disable = &omap1_clk_disable_generic,
> @@ -649,7 +649,7 @@ static struct clk usb_dc_ck = {
> /* Direct from ULPD, no parent */
> .rate = 48000000,
> .flags = CLOCK_IN_OMAP16XX | RATE_FIXED,
> - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
> + .enable_reg = SOFT_REQ_REG,
> .enable_bit = 4,
> .enable = &omap1_clk_enable_generic,
> .disable = &omap1_clk_disable_generic,
> @@ -660,7 +660,7 @@ static struct clk mclk_1510 = {
> /* Direct from ULPD, no parent. May be enabled by ext hardware. */
> .rate = 12000000,
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
> - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
> + .enable_reg = SOFT_REQ_REG,
> .enable_bit = 6,
> .enable = &omap1_clk_enable_generic,
> .disable = &omap1_clk_disable_generic,
> @@ -670,7 +670,7 @@ static struct clk mclk_16xx = {
> .name = "mclk",
> /* Direct from ULPD, no parent. May be enabled by ext hardware. */
> .flags = CLOCK_IN_OMAP16XX,
> - .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
> + .enable_reg = COM_CLK_DIV_CTRL_SEL,
> .enable_bit = COM_ULPD_PLL_CLK_REQ,
> .set_rate = &omap1_set_ext_clk_rate,
> .round_rate = &omap1_round_ext_clk_rate,
> @@ -692,7 +692,7 @@ static struct clk bclk_16xx = {
> .name = "bclk",
> /* Direct from ULPD, no parent. May be enabled by ext hardware. */
> .flags = CLOCK_IN_OMAP16XX,
> - .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
> + .enable_reg = SWD_CLK_DIV_CTRL_SEL,
> .enable_bit = SWD_ULPD_PLL_CLK_REQ,
> .set_rate = &omap1_set_ext_clk_rate,
> .round_rate = &omap1_round_ext_clk_rate,
> @@ -709,7 +709,7 @@ static struct clk mmc1_ck = {
> .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
> CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
> CLOCK_NO_IDLE_PARENT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
> + .enable_reg = MOD_CONF_CTRL_0,
> .enable_bit = 23,
> .enable = &omap1_clk_enable_generic,
> .disable = &omap1_clk_disable_generic,
> @@ -723,7 +723,7 @@ static struct clk mmc2_ck = {
> .rate = 48000000,
> .flags = CLOCK_IN_OMAP16XX |
> RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
> - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
> + .enable_reg = MOD_CONF_CTRL_0,
> .enable_bit = 20,
> .enable = &omap1_clk_enable_generic,
> .disable = &omap1_clk_disable_generic,
> diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
> index 3486524..bc994f2 100644
> --- a/arch/arm/plat-omap/include/mach/hardware.h
> +++ b/arch/arm/plat-omap/include/mach/hardware.h
> @@ -89,7 +89,7 @@
> #define DPLL_CTL (0xfffecf00)
>
> /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
> -#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
> +#define DSP_CONFIG_REG_BASE 0xe1008000
> #define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
> #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
> #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
> --
> 1.6.0.2.307.gc427
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
