From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Fix it by passing u32 into enable_reg and letting
clock.c use OMAP1_IO_ADDRESS().
This will probably be changed by a better solution
later on, but at least we make it buildable again.
Cc: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
arch/arm/mach-omap1/clock.c | 38 ++++++++--------
arch/arm/mach-omap1/clock.h | 64 ++++++++++++++--------------
arch/arm/plat-omap/include/mach/hardware.h | 2 +-
3 files changed, 52 insertions(+), 52 deletions(-)
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4d0c444..997cfda 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -41,7 +41,7 @@ static void omap1_watchdog_recalc(struct clk * clk)
static void omap1_uart_recalc(struct clk * clk)
{
- unsigned int val = __raw_readl(clk->enable_reg);
+ unsigned int val = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
if (val & clk->enable_bit)
clk->rate = 48000000;
else
@@ -372,14 +372,14 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
{
unsigned int val;
- val = __raw_readl(clk->enable_reg);
+ val = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
if (rate == 12000000)
val &= ~(1 << clk->enable_bit);
else if (rate == 48000000)
val |= (1 << clk->enable_bit);
else
return -EINVAL;
- __raw_writel(val, clk->enable_reg);
+ __raw_writel(val, OMAP1_IO_ADDRESS(clk->enable_reg));
clk->rate = rate;
return 0;
@@ -398,8 +398,8 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
else
ratio_bits = (dsor - 2) << 2;
- ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
- __raw_writew(ratio_bits, clk->enable_reg);
+ ratio_bits |= __raw_readw(OMAP1_IO_ADDRESS(clk->enable_reg)) & ~0xfd;
+ __raw_writew(ratio_bits, OMAP1_IO_ADDRESS(clk->enable_reg));
return 0;
}
@@ -440,8 +440,8 @@ static void omap1_init_ext_clk(struct clk * clk)
__u16 ratio_bits;
/* Determine current rate and ensure clock is based on 96MHz APLL */
- ratio_bits = __raw_readw(clk->enable_reg) & ~1;
- __raw_writew(ratio_bits, clk->enable_reg);
+ ratio_bits = __raw_readw(OMAP1_IO_ADDRESS(clk->enable_reg)) & ~1;
+ __raw_writew(ratio_bits, OMAP1_IO_ADDRESS(clk->enable_reg));
ratio_bits = (ratio_bits & 0xfc) >> 2;
if (ratio_bits > 6)
@@ -499,20 +499,20 @@ static int omap1_clk_enable_generic(struct clk *clk)
if (clk->flags & ALWAYS_ENABLED)
return 0;
- if (unlikely(clk->enable_reg == NULL)) {
+ if (unlikely(clk->enable_reg == 0)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
clk->name);
return -EINVAL;
}
if (clk->flags & ENABLE_REG_32BIT) {
- regval32 = __raw_readl(clk->enable_reg);
+ regval32 = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
regval32 |= (1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
+ __raw_writel(regval32, OMAP1_IO_ADDRESS(clk->enable_reg));
} else {
- regval16 = __raw_readw(clk->enable_reg);
+ regval16 = __raw_readw(OMAP1_IO_ADDRESS(clk->enable_reg));
regval16 |= (1 << clk->enable_bit);
- __raw_writew(regval16, clk->enable_reg);
+ __raw_writew(regval16, OMAP1_IO_ADDRESS(clk->enable_reg));
}
return 0;
@@ -523,17 +523,17 @@ static void omap1_clk_disable_generic(struct clk *clk)
__u16 regval16;
__u32 regval32;
- if (clk->enable_reg == NULL)
+ if (clk->enable_reg == 0)
return;
if (clk->flags & ENABLE_REG_32BIT) {
- regval32 = __raw_readl(clk->enable_reg);
+ regval32 = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
regval32 &= ~(1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
+ __raw_writel(regval32, OMAP1_IO_ADDRESS(clk->enable_reg));
} else {
- regval16 = __raw_readw(clk->enable_reg);
+ regval16 = __raw_readw(OMAP1_IO_ADDRESS(clk->enable_reg));
regval16 &= ~(1 << clk->enable_bit);
- __raw_writew(regval16, clk->enable_reg);
+ __raw_writew(regval16, OMAP1_IO_ADDRESS(clk->enable_reg));
}
}
@@ -609,9 +609,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
/* Is the clock already disabled? */
if (clk->flags & ENABLE_REG_32BIT)
- regval32 = __raw_readl(clk->enable_reg);
+ regval32 = __raw_readl(OMAP1_IO_ADDRESS(clk->enable_reg));
else
- regval32 = __raw_readw(clk->enable_reg);
+ regval32 = __raw_readw(OMAP1_IOADRESS(clk->enable_reg));
if ((regval32 & (1 << clk->enable_bit)) == 0)
return;
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 44eda0f..3f5fe43 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -174,7 +174,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
ENABLE_REG_32BIT | RATE_PROPAGATES,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_CKOUT_ARM,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -188,7 +188,7 @@ static struct clk sossi_ck = {
.parent = &ck_dpll1out.clk,
.flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
ENABLE_REG_32BIT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
+ .enable_reg = MOD_CONF_CTRL_1,
.enable_bit = 16,
.recalc = &omap1_sossi_recalc,
.set_rate = &omap1_set_sossi_rate,
@@ -215,7 +215,7 @@ static struct arm_idlect1_clk armper_ck = {
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP310 | RATE_CKCTL |
CLOCK_IDLE_CONTROL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
@@ -229,7 +229,7 @@ static struct clk arm_gpio_ck = {
.name = "arm_gpio_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_GPIOCK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -242,7 +242,7 @@ static struct arm_idlect1_clk armxor_ck = {
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -257,7 +257,7 @@ static struct arm_idlect1_clk armtim_ck = {
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_TIMCK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -272,7 +272,7 @@ static struct arm_idlect1_clk armwdt_ck = {
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_WDTCK,
.recalc = &omap1_watchdog_recalc,
.enable = &omap1_clk_enable_generic,
@@ -300,7 +300,7 @@ static struct clk dsp_ck = {
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
+ .enable_reg = ARM_CKCTL,
.enable_bit = EN_DSPCK,
.rate_offset = CKCTL_DSPDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
@@ -324,7 +324,7 @@ static struct clk dspper_ck = {
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL,
- .enable_reg = IOMEM(DSP_IDLECT2),
+ .enable_reg = DSP_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc_dsp_domain,
@@ -337,7 +337,7 @@ static struct clk dspxor_ck = {
.name = "dspxor_ck",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
- .enable_reg = IOMEM(DSP_IDLECT2),
+ .enable_reg = DSP_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_dsp_domain,
@@ -348,7 +348,7 @@ static struct clk dsptim_ck = {
.name = "dsptim_ck",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
- .enable_reg = IOMEM(DSP_IDLECT2),
+ .enable_reg = DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_dsp_domain,
@@ -402,7 +402,7 @@ static struct clk l3_ocpi_ck = {
.name = "l3_ocpi_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP16XX,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
+ .enable_reg = ARM_IDLECT3,
.enable_bit = EN_OCPI_CK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -413,7 +413,7 @@ static struct clk tc1_ck = {
.name = "tc1_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP16XX,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
+ .enable_reg = ARM_IDLECT3,
.enable_bit = EN_TC1_CK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -424,7 +424,7 @@ static struct clk tc2_ck = {
.name = "tc2_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP16XX,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
+ .enable_reg = ARM_IDLECT3,
.enable_bit = EN_TC2_CK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -457,7 +457,7 @@ static struct arm_idlect1_clk api_ck = {
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_APICK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -472,7 +472,7 @@ static struct arm_idlect1_clk lb_ck = {
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
CLOCK_IDLE_CONTROL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_LBCK,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
@@ -503,7 +503,7 @@ static struct clk lcd_ck_16xx = {
.name = "lcd_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
@@ -517,7 +517,7 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
RATE_CKCTL | CLOCK_IDLE_CONTROL,
- .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
+ .enable_reg = ARM_IDLECT2,
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
@@ -535,7 +535,7 @@ static struct clk uart1_1510 = {
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ENABLE_REG_32BIT | ALWAYS_ENABLED |
CLOCK_NO_IDLE_PARENT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+ .enable_reg = MOD_CONF_CTRL_0,
.enable_bit = 29, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
@@ -551,7 +551,7 @@ static struct uart_clk uart1_16xx = {
.rate = 48000000,
.flags = CLOCK_IN_OMAP16XX | RATE_FIXED |
ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+ .enable_reg = MOD_CONF_CTRL_0,
.enable_bit = 29,
.enable = &omap1_clk_enable_uart_functional,
.disable = &omap1_clk_disable_uart_functional,
@@ -567,7 +567,7 @@ static struct clk uart2_ck = {
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+ .enable_reg = MOD_CONF_CTRL_0,
.enable_bit = 30, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
@@ -583,7 +583,7 @@ static struct clk uart3_1510 = {
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ENABLE_REG_32BIT | ALWAYS_ENABLED |
CLOCK_NO_IDLE_PARENT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+ .enable_reg = MOD_CONF_CTRL_0,
.enable_bit = 31, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
@@ -599,7 +599,7 @@ static struct uart_clk uart3_16xx = {
.rate = 48000000,
.flags = CLOCK_IN_OMAP16XX | RATE_FIXED |
ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+ .enable_reg = MOD_CONF_CTRL_0,
.enable_bit = 31,
.enable = &omap1_clk_enable_uart_functional,
.disable = &omap1_clk_disable_uart_functional,
@@ -613,7 +613,7 @@ static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
.rate = 6000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
+ .enable_reg = ULPD_CLOCK_CTRL,
.enable_bit = USB_MCLK_EN_BIT,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
@@ -625,7 +625,7 @@ static struct clk usb_hhc_ck1510 = {
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+ .enable_reg = MOD_CONF_CTRL_0,
.enable_bit = USB_HOST_HHC_UHOST_EN,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
@@ -638,7 +638,7 @@ static struct clk usb_hhc_ck16xx = {
/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
.flags = CLOCK_IN_OMAP16XX |
RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
+ .enable_reg = (OTG_BASE + 0x08), /* OTG_SYSCON_2 */
.enable_bit = 8 /* UHOST_EN */,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
@@ -649,7 +649,7 @@ static struct clk usb_dc_ck = {
/* Direct from ULPD, no parent */
.rate = 48000000,
.flags = CLOCK_IN_OMAP16XX | RATE_FIXED,
- .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+ .enable_reg = SOFT_REQ_REG,
.enable_bit = 4,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
@@ -660,7 +660,7 @@ static struct clk mclk_1510 = {
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
- .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+ .enable_reg = SOFT_REQ_REG,
.enable_bit = 6,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
@@ -670,7 +670,7 @@ static struct clk mclk_16xx = {
.name = "mclk",
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.flags = CLOCK_IN_OMAP16XX,
- .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
+ .enable_reg = COM_CLK_DIV_CTRL_SEL,
.enable_bit = COM_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
@@ -692,7 +692,7 @@ static struct clk bclk_16xx = {
.name = "bclk",
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.flags = CLOCK_IN_OMAP16XX,
- .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
+ .enable_reg = SWD_CLK_DIV_CTRL_SEL,
.enable_bit = SWD_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
@@ -709,7 +709,7 @@ static struct clk mmc1_ck = {
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
CLOCK_NO_IDLE_PARENT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+ .enable_reg = MOD_CONF_CTRL_0,
.enable_bit = 23,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
@@ -723,7 +723,7 @@ static struct clk mmc2_ck = {
.rate = 48000000,
.flags = CLOCK_IN_OMAP16XX |
RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+ .enable_reg = MOD_CONF_CTRL_0,
.enable_bit = 20,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3486524..bc994f2 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -89,7 +89,7 @@
#define DPLL_CTL (0xfffecf00)
/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
+#define DSP_CONFIG_REG_BASE 0xe1008000
#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
