From: Felipe Balbi <felipe.balbi@xxxxxxxxx> Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx> --- arch/arm/mach-omap1/board-osk.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e506aef..7d8d18a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -277,9 +277,9 @@ static void __init osk_init_smc91x(void) } /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ - l = omap_readl(EMIFS_CCS(1)); + l = __raw_readl(EMIFS_CCS(1)); l |= 0x3; - omap_writel(l, EMIFS_CCS(1)); + __raw_writel(l, EMIFS_CCS(1)); } static void __init osk_init_cf(void) @@ -539,9 +539,9 @@ static void __init osk_init(void) * wrong CS3 memory timings. This mainly leads to CRC * or similar errors if you use NOR flash (e.g. with JFFS2) */ - l = omap_readl(EMIFS_CCS(3)); + l = __raw_readl(EMIFS_CCS(3)); if (l != EMIFS_CS3_VAL) - omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3)); + __raw_writel(EMIFS_CS3_VAL, EMIFS_CCS(3)); osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; @@ -549,9 +549,9 @@ static void __init osk_init(void) omap_board_config = osk_config; omap_board_config_size = ARRAY_SIZE(osk_config); - l = omap_readl(USB_TRANSCEIVER_CTRL); + l = __raw_readl(USB_TRANSCEIVER_CTRL); l |= (3 << 1); - omap_writel(l, USB_TRANSCEIVER_CTRL); + __raw_writel(l, USB_TRANSCEIVER_CTRL); /* irq for tps65010 chip */ /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ -- 1.6.0.2.307.gc427 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
