From: Felipe Balbi <felipe.balbi@xxxxxxxxx> Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx> --- arch/arm/mach-omap1/board-fsample.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index db78946..d758ff1 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -281,7 +281,7 @@ static void __init omap_fsample_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + __raw_writew(__raw_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -292,21 +292,21 @@ static void __init omap_fsample_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + __raw_writel(0x0000fff3, OMAP730_FLASH_CFG_0); + __raw_writel(0x00000088, OMAP730_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + __raw_writel(0x0000fff3, OMAP730_FLASH_CFG_1); + __raw_writel(0x00000000, OMAP730_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + __raw_writel(__raw_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") -- 1.6.0.2.307.gc427 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
