use new style twl4030-core to register a platform_device
for twl4030-usb.
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
arch/arm/mach-omap2/board-2430sdp.c | 6 +
arch/arm/mach-omap2/board-3430sdp.c | 5 +
arch/arm/mach-omap2/board-ldp.c | 7 +
arch/arm/mach-omap2/board-omap2evm.c | 5 +
arch/arm/mach-omap2/board-omap3beagle.c | 7 +
arch/arm/mach-omap2/board-omap3evm.c | 6 +-
arch/arm/mach-omap2/board-overo.c | 5 +
drivers/i2c/chips/Kconfig | 16 --
drivers/i2c/chips/twl4030-core.c | 27 +++
drivers/i2c/chips/twl4030-usb.c | 324 ++++++++++++++-----------------
include/linux/i2c/twl4030.h | 10 +
11 files changed, 219 insertions(+), 199 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 8c4c9dd..3073528 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -344,12 +344,18 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = {
{OMAP_TAG_SERIAL_CONSOLE, &sdp2430_serial_console_config},
};
+
+static struct twl4030_usb_data sdp2430_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data sdp2430_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &sdp2430_kp_data,
+ .usb = &sdp2430_usb_data,
};
static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index fe1ba4e..e0c39c2 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -300,12 +300,17 @@ static struct omap_board_config_kernel sdp3430_config[] __initdata = {
{ OMAP_TAG_LCD, &sdp3430_lcd_config },
};
+static struct twl4030_usb_data sdp3430_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data sdp3430_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &sdp3430_kp_data,
+ .usb = &sdp3430_usb_data,
};
static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index c07c712..219579b 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -183,9 +183,16 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_UART, &ldp_uart_config },
};
+static struct twl4030_usb_data ldp_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .usb = &ldp_usb_data,
};
static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
diff --git a/arch/arm/mach-omap2/board-omap2evm.c b/arch/arm/mach-omap2/board-omap2evm.c
index d2a3743..be8348d 100644
--- a/arch/arm/mach-omap2/board-omap2evm.c
+++ b/arch/arm/mach-omap2/board-omap2evm.c
@@ -226,12 +226,17 @@ static struct omap_board_config_kernel omap2_evm_config[] __initdata = {
{ OMAP_TAG_LCD, &omap2_evm_lcd_config },
};
+static struct twl4030_usb_data omap2evm_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data omap2evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap2evm_kp_data,
+ .usb = &omap2evm_usb_data,
};
static struct i2c_board_info __initdata omap2evm_i2c_boardinfo[] = {
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index fa8f5f6..ae677b9 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -110,9 +110,16 @@ static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_usb_data beagle_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .usb = &beagle_usb_data,
};
static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c4a969d..158138c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -90,6 +90,10 @@ static struct omap_uart_config omap3_evm_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_usb_data omap3evm_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static int omap3evm_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -118,13 +122,13 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
.irq = TWL4030_MODIRQ_KEYPAD,
};
-
static struct twl4030_platform_data omap3evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
+ .usb = &omap3evm_usb_data,
};
static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index a41e6fa..2e6d2c7 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -146,9 +146,14 @@ static struct omap_uart_config overo_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_usb_data overo_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
+ .usb = &overo_usb_data,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index e91be60..121aec9 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -186,22 +186,6 @@ config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE
-choice
- prompt "Transceiver mode"
- depends on TWL4030_USB
- help
- TWL4030 USB transceiver can operate in various
- mutually-exclusive modes. Select one of them.
-
-config TWL4030_USB_HS_ULPI
- depends on TWL4030_USB
- bool "High-speed ULPI"
- help
- Say Y here if the TWL4030 is connected to high-speed USB
- controller through a ULPI interface.
-
-endchoice
-
config TWL4030_PWRBUTTON
tristate "TWL4030 Power button Driver"
depends on TWL4030_CORE
diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c
index 0a2d8fe..02be771 100644
--- a/drivers/i2c/chips/twl4030-core.c
+++ b/drivers/i2c/chips/twl4030-core.c
@@ -57,6 +57,12 @@
#define twl_has_keypad() false
#endif
+#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
+#define twl_has_usb() true
+#else
+#define twl_has_usb() false
+#endif
+
/* Primary Interrupt Handler on TWL4030 Registers */
/* Register Definitions */
@@ -701,6 +707,27 @@ static int add_children(struct twl4030_platform_data *pdata)
}
}
+ if (twl_has_usb() && pdata->usb) {
+ pdev = platform_device_alloc("twl4030_usb", -1);
+ if (pdev) {
+ twl = &twl4030_modules[TWL4030_SLAVENUM_NUM0];
+ pdev->dev.parent = &twl->client->dev;
+ device_init_wakeup(&pdev->dev, 1);
+ status = platform_device_add_data(pdev, pdata->usb,
+ sizeof(*pdata->usb));
+ if (status < 0) {
+ platform_device_put(pdev);
+ goto err;
+ }
+ status = platform_device_add(pdev);
+ if (status < 0)
+ platform_device_put(pdev);
+ } else {
+ status = -ENOMEM;
+ goto err;
+ }
+ }
+
err:
pr_err("failed to add twl4030's children\n");
return status;
diff --git a/drivers/i2c/chips/twl4030-usb.c b/drivers/i2c/chips/twl4030-usb.c
index 2906b82..246aa9d 100644
--- a/drivers/i2c/chips/twl4030-usb.c
+++ b/drivers/i2c/chips/twl4030-usb.c
@@ -2,6 +2,8 @@
* twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
*
* Copyright (C) 2004-2007 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@xxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,11 +24,11 @@
* - 3-pin mode support may be added in future.
*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/usb.h>
#include <linux/usb/ch9.h>
@@ -228,14 +230,6 @@
#define VUSB3V1_TYPE 0x78
#define VUSB3V1_REMAP 0x79
-#define ID_STATUS 0x96
-#define ID_RES_FLOAT (1 << 4) /* mini-B */
-#define ID_RES_440K (1 << 3) /* type 2 charger */
-#define ID_RES_200K (1 << 2) /* 5-wire carkit or
- type 1 charger */
-#define ID_RES_102K (1 << 1) /* phone */
-#define ID_RES_GND (1 << 0) /* mini-A */
-
/* In module TWL4030_MODULE_INTBR */
#define PMBR1 0x0D
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
@@ -250,11 +244,7 @@
#define REG_PWR_SIH_CTRL 0x07
#define COR (1 << 2)
-/* internal define on top of container_of */
-#define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg);
-
/* bits in OTG_CTRL */
-
#define OTG_XCEIV_OUTPUTS \
(OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
#define OTG_XCEIV_INPUTS \
@@ -268,22 +258,23 @@
OTG_CTRL_BITS)
-/*-------------------------------------------------------------------------*/
-
struct twl4030_usb {
struct otg_transceiver otg;
+ struct device *dev;
+
+ /* pin configuration */
+ enum twl4030_usb_mode usb_mode;
int irq;
- u8 usb_mode; /* pin configuration */
-#define T2_USB_MODE_ULPI 1
-/* #define T2_USB_MODE_CEA2011_3PIN 2 */
u8 asleep;
};
-static struct twl4030_usb *the_transceiver;
+/* internal define on top of container_of */
+#define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg);
/*-------------------------------------------------------------------------*/
-static int twl4030_i2c_write_u8_verify(u8 module, u8 data, u8 address)
+static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
+ u8 module, u8 data, u8 address)
{
u8 check;
@@ -297,46 +288,51 @@ static int twl4030_i2c_write_u8_verify(u8 module, u8 data, u8 address)
(check == data))
return 0;
/* Failed again: Return error */
+
return -EBUSY;
}
-#define twl4030_usb_write_verify(address, data) \
- twl4030_i2c_write_u8_verify(TWL4030_MODULE_USB, (data), (address))
+#define twl4030_usb_write_verify(twl, address, data) \
+ twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address))
-static inline int twl4030_usb_write(u8 address, u8 data)
+static inline int twl4030_usb_write(struct twl4030_usb *twl,
+ u8 address, u8 data)
{
int ret = 0;
+
ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address);
if (ret >= 0) {
#if 0 /* debug */
u8 data1;
if (twl4030_i2c_read_u8(TWL4030_MODULE_USB, &data1,
address) < 0)
- printk(KERN_ERR "re-read failed\n");
+ dev_err(twl->dev, "re-read failed\n");
else
- printk(KERN_INFO
+ dev_dbg(twl->dev,
"Write %s wrote %x read %x from reg %x\n",
(data1 == data) ? "succeed" : "mismatch",
data, data1, address);
#endif
} else {
- printk(KERN_WARNING
+ dev_warn(twl->dev,
"TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
}
+
return ret;
}
-static inline int twl4030_usb_read(u8 address)
+static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
{
u8 data;
int ret = 0;
+
ret = twl4030_i2c_read_u8(TWL4030_MODULE_USB, &data, address);
- if (ret >= 0) {
+ if (ret >= 0)
ret = data;
- } else {
- printk(KERN_WARNING
+ else
+ dev_warn(twl->dev,
"TWL4030:USB:Read[0x%x] Error %d\n", address, ret);
- }
+
return ret;
}
@@ -345,14 +341,13 @@ static inline int twl4030_usb_read(u8 address)
static inline int
twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
{
- return twl4030_usb_write(reg + 1, bits);
+ return twl4030_usb_write(twl, reg + 1, bits);
}
static inline int
twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
{
- return twl4030_usb_write(reg + 2, bits);
-
+ return twl4030_usb_write(twl, reg + 2, bits);
}
/*-------------------------------------------------------------------------*/
@@ -380,185 +375,130 @@ static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode)
};
}
-#ifdef CONFIG_TWL4030_USB_HS_ULPI
-static void hs_usb_init(struct twl4030_usb *twl)
-{
- twl->usb_mode = T2_USB_MODE_ULPI;
- return;
-}
-
-#endif
-
-static void twl4030_i2c_access(int on)
+static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
{
unsigned long timeout;
- int val = twl4030_usb_read(PHY_CLK_CTRL);
+ int val = twl4030_usb_read(twl, PHY_CLK_CTRL);
if (val >= 0) {
if (on) {
/* enable DPLL to access PHY registers over I2C */
val |= REQ_PHY_DPLL_CLK;
- if (twl4030_usb_write_verify(PHY_CLK_CTRL,
- (u8)val) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c write failed,"
- " line %d\n", __LINE__);
- return;
- }
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
+ (u8)val) < 0);
timeout = jiffies + HZ;
- while (!(twl4030_usb_read(PHY_CLK_CTRL_STS) &
+ while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
PHY_DPLL_CLK)
&& time_before(jiffies, timeout))
udelay(10);
- if (!(twl4030_usb_read(PHY_CLK_CTRL_STS) &
+ if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
PHY_DPLL_CLK))
- printk(KERN_ERR "Timeout setting T2 HSUSB "
+ dev_err(twl->dev, "Timeout setting T2 HSUSB "
"PHY DPLL clock\n");
} else {
/* let ULPI control the DPLL clock */
val &= ~REQ_PHY_DPLL_CLK;
- if (twl4030_usb_write_verify(PHY_CLK_CTRL,
- (u8)val) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c write failed,"
- " line %d\n", __LINE__);
- }
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
+ (u8)val) < 0);
}
}
- return;
}
-static void usb_irq_enable(int rising, int falling)
+static void usb_irq_enable(struct twl4030_usb *twl, int rising, int falling)
{
u8 val;
/* edge setup */
- if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c read failed,"
- " line %d\n", __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
+ &val, REG_PWR_EDR1) < 0);
+
val &= ~(USB_PRES_RISING | USB_PRES_FALLING);
if (rising)
val = val | USB_PRES_RISING;
if (falling)
val = val | USB_PRES_FALLING;
- if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val,
- REG_PWR_EDR1) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c write failed,"
- " line %d\n", __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
+ val, REG_PWR_EDR1) < 0);
/* un-mask interrupt */
- if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_IMR1) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c read failed,"
- " line %d\n", __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
+ &val, REG_PWR_IMR1) < 0);
+
val &= ~USB_PRES;
- if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val,
- REG_PWR_IMR1) < 0)
- printk(KERN_ERR "twl4030_usb: i2c write failed,"
- " line %d\n", __LINE__);
- return;
+ WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
+ val, REG_PWR_IMR1) < 0);
}
-static void usb_irq_disable(void)
+static void usb_irq_disable(struct twl4030_usb *twl)
{
u8 val;
/* undo edge setup */
- if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c read failed,"
- " line %d\n", __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
+ &val, REG_PWR_EDR1) < 0);
val &= ~(USB_PRES_RISING | USB_PRES_FALLING);
- if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val,
- REG_PWR_EDR1) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c write failed,"
- " line %d\n", __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
+ val, REG_PWR_EDR1) < 0);
/* mask interrupt */
- if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_IMR1) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c read failed,"
- " line %d\n", __LINE__);
- return;
- }
+ WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
+ &val, REG_PWR_IMR1) < 0);
val |= USB_PRES;
- if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val,
- REG_PWR_IMR1) < 0)
- printk(KERN_ERR "twl4030_usb: i2c write failed,"
- " line %d\n", __LINE__);
- return;
+ WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
+ val, REG_PWR_IMR1) < 0);
}
static void twl4030_phy_power(struct twl4030_usb *twl, int on)
{
u8 pwr;
- pwr = twl4030_usb_read(PHY_PWR_CTRL);
+ pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
if (on) {
pwr &= ~PHY_PWR_PHYPWD;
- if (twl4030_usb_write_verify(PHY_PWR_CTRL, pwr) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c write failed,"
- " line %d\n", __LINE__);
- return;
- }
- twl4030_usb_write(PHY_CLK_CTRL,
- twl4030_usb_read(PHY_CLK_CTRL) |
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ twl4030_usb_write(twl, PHY_CLK_CTRL,
+ twl4030_usb_read(twl, PHY_CLK_CTRL) |
(PHY_CLK_CTRL_CLOCKGATING_EN |
PHY_CLK_CTRL_CLK32K_EN));
} else {
pwr |= PHY_PWR_PHYPWD;
- if (twl4030_usb_write_verify(PHY_PWR_CTRL, pwr) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c write failed,"
- " line %d\n", __LINE__);
- }
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
}
- return;
}
-static void twl4030_phy_suspend(int controller_off)
+static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
{
- struct twl4030_usb *twl = the_transceiver;
-
if (controller_off)
- usb_irq_disable();
+ usb_irq_disable(twl);
if (twl->asleep)
return;
if (!controller_off)
/* enable rising edge interrupt to detect cable attach */
- usb_irq_enable(1, 0);
+ usb_irq_enable(twl, 1, 0);
twl4030_phy_power(twl, 0);
twl->asleep = 1;
- return;
}
-static void twl4030_phy_resume(void)
+static void twl4030_phy_resume(struct twl4030_usb *twl)
{
- struct twl4030_usb *twl = the_transceiver;
-
if (!twl->asleep)
return;
/* enable falling edge interrupt to detect cable detach */
- usb_irq_enable(0, 1);
+ usb_irq_enable(twl, 0, 1);
twl4030_phy_power(twl, 1);
- twl4030_i2c_access(1);
+ twl4030_i2c_access(twl, 1);
twl4030_usb_set_mode(twl, twl->usb_mode);
if (twl->usb_mode == T2_USB_MODE_ULPI)
- twl4030_i2c_access(0);
+ twl4030_i2c_access(twl, 0);
twl->asleep = 0;
- return;
}
static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
@@ -591,59 +531,57 @@ static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
{
- int ret = IRQ_NONE;
+ struct twl4030_usb *twl = _twl;
u8 val;
/* action based on cable attach or detach */
- if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) {
- printk(KERN_ERR "twl4030_usb: i2c read failed,"
- " line %d\n", __LINE__);
- goto done;
- }
+ WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
+ &val, REG_PWR_EDR1) < 0);
if (val & USB_PRES_RISING) {
- twl4030_phy_resume();
+ twl4030_phy_resume(twl);
twl4030charger_usb_en(1);
} else {
twl4030charger_usb_en(0);
- twl4030_phy_suspend(0);
+ twl4030_phy_suspend(twl, 0);
}
- ret = IRQ_HANDLED;
-
-done:
- return ret;
+ return IRQ_HANDLED;
}
static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
{
+ struct twl4030_usb *twl = xceiv_to_twl(x);
+
if (suspend)
- twl4030_phy_suspend(1);
+ twl4030_phy_suspend(twl, 1);
else
- twl4030_phy_resume();
+ twl4030_phy_resume(twl);
return 0;
}
-static int twl4030_set_peripheral(struct otg_transceiver *xceiv,
+static int twl4030_set_peripheral(struct otg_transceiver *x,
struct usb_gadget *gadget)
{
+ struct twl4030_usb *twl;
u32 l;
- struct twl4030_usb *twl = xceiv_to_twl(xceiv);
- if (!xceiv)
+ if (!x)
return -ENODEV;
+ twl = xceiv_to_twl(x);
+
if (!gadget) {
omap_writew(0, OTG_IRQ_EN);
- twl4030_phy_suspend(1);
+ twl4030_phy_suspend(twl, 1);
twl->otg.gadget = NULL;
return -ENODEV;
}
twl->otg.gadget = gadget;
- twl4030_phy_resume();
+ twl4030_phy_resume(twl);
l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS);
@@ -660,23 +598,25 @@ static int twl4030_set_peripheral(struct otg_transceiver *xceiv,
return 0;
}
-static int twl4030_set_host(struct otg_transceiver *xceiv, struct usb_bus *host)
+static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host)
{
- struct twl4030_usb *twl = xceiv_to_twl(xceiv);
+ struct twl4030_usb *twl;
- if (!xceiv)
+ if (!x)
return -ENODEV;
+ twl = xceiv_to_twl(x);
+
if (!host) {
omap_writew(0, OTG_IRQ_EN);
- twl4030_phy_suspend(1);
+ twl4030_phy_suspend(twl, 1);
twl->otg.host = NULL;
return -ENODEV;
}
twl->otg.host = host;
- twl4030_phy_resume();
+ twl4030_phy_resume(twl);
twl4030_usb_set_bits(twl, TWL4030_OTG_CTRL,
TWL4030_OTG_CTRL_DMPULLDOWN
@@ -689,63 +629,63 @@ static int twl4030_set_host(struct otg_transceiver *xceiv, struct usb_bus *host)
return 0;
}
-static int __init twl4030_usb_init(void)
+static int __init twl4030_usb_probe(struct platform_device *pdev)
{
+ struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
int status;
- if (the_transceiver)
- return 0;
-
twl = kzalloc(sizeof *twl, GFP_KERNEL);
if (!twl)
- return 0;
+ return -ENOMEM;
- the_transceiver = twl;
+ if (!pdata) {
+ dev_info(&pdev->dev, "platform_data not available\n");
+ return -EINVAL;
+ }
+ twl->dev = &pdev->dev;
twl->irq = TWL4030_PWRIRQ_USB_PRES;
twl->otg.set_host = twl4030_set_host;
twl->otg.set_peripheral = twl4030_set_peripheral;
twl->otg.set_suspend = twl4030_set_suspend;
+ twl->usb_mode = pdata->usb_mode;
- usb_irq_disable();
+ usb_irq_disable(twl);
status = request_irq(twl->irq, twl4030_usb_irq, 0, "twl4030_usb", twl);
if (status < 0) {
- printk(KERN_DEBUG "can't get IRQ %d, err %d\n",
+ dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
twl->irq, status);
kfree(twl);
- return -ENODEV;
+ return status;
}
-#if defined(CONFIG_TWL4030_USB_HS_ULPI)
- hs_usb_init(twl);
-#endif
+
twl4030_usb_ldo_init(twl);
twl4030_phy_power(twl, 1);
- twl4030_i2c_access(1);
+ twl4030_i2c_access(twl, 1);
twl4030_usb_set_mode(twl, twl->usb_mode);
- if (twl->usb_mode == T2_USB_MODE_ULPI)
- twl4030_i2c_access(0);
twl->asleep = 0;
- if (twl->usb_mode == T2_USB_MODE_ULPI)
- twl4030_phy_suspend(1);
+ if (twl->usb_mode == T2_USB_MODE_ULPI) {
+ twl4030_i2c_access(twl, 0);
+ twl4030_phy_suspend(twl, 0);
+ }
otg_set_transceiver(&twl->otg);
-
- printk(KERN_INFO "Initialized TWL4030 USB module\n");
+ platform_set_drvdata(pdev, twl);
+ dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
return 0;
}
-
-static void __exit twl4030_usb_exit(void)
+static int __exit twl4030_usb_remove(struct platform_device *pdev)
{
- struct twl4030_usb *twl = the_transceiver;
+ struct twl4030_usb *twl = platform_get_drvdata(pdev);
int val;
- usb_irq_disable();
+ usb_irq_disable(twl);
free_irq(twl->irq, twl);
/* set transceiver mode to power on defaults */
@@ -755,11 +695,11 @@ static void __exit twl4030_usb_exit(void)
* clear dpll clock request for i2c access,
* disable 32KHz
*/
- val = twl4030_usb_read(PHY_CLK_CTRL);
+ val = twl4030_usb_read(twl, PHY_CLK_CTRL);
if (val >= 0) {
val |= PHY_CLK_CTRL_CLOCKGATING_EN;
val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK);
- twl4030_usb_write(PHY_CLK_CTRL, (u8)val);
+ twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val);
}
/* disable complete OTG block */
@@ -768,12 +708,32 @@ static void __exit twl4030_usb_exit(void)
twl4030_phy_power(twl, 0);
kfree(twl);
+
+ return 0;
}
-subsys_initcall(twl4030_usb_init);
+static struct platform_driver twl4030_driver = {
+ .probe = twl4030_usb_probe,
+ .remove = __exit_p(twl4030_remove),
+ .driver = {
+ .name = "twl4030_usb",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init twl4030_usb_init(void)
+{
+ return platform_driver_register(&twl4030_driver);
+}
+module_init(twl4030_usb_init);
+
+static void __exit twl4030_usb_exit(void)
+{
+ platform_driver_unregister(&twl4030_driver);
+}
module_exit(twl4030_usb_exit);
-MODULE_ALIAS("i2c:twl4030-usb");
-MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_ALIAS("platform:twl4030_usb");
+MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation");
MODULE_DESCRIPTION("TWL4030 USB transceiver driver");
MODULE_LICENSE("GPL");
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 0ac417c..8a12ff0 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -61,9 +61,19 @@ struct twl4030_keypad_data {
unsigned int rep:1;
};
+enum twl4030_usb_mode {
+ T2_USB_MODE_ULPI = 1,
+ T2_USB_MODE_CEA2011_3PIN = 2,
+};
+
+struct twl4030_usb_data {
+ enum twl4030_usb_mode usb_mode;
+};
+
struct twl4030_platform_data {
unsigned irq_base, irq_end;
struct twl4030_keypad_data *keypad;
+ struct twl4030_usb_data *usb;
/* REVISIT more to come ... _nothing_ should be hard-wired */
};
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
