[PATCH 02/23] twl4030-gpio: Remove default pullup enable/disable of GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@xxxxxx>

One twl4030_request_gpio() should not tamper with the pullup
enabling/disabling of the rest of the GPIOs. So removing the default
pullup values written to REG_GPIOPUPDCTR1.

Acked-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Girish S G <girishsg@xxxxxx>
Signed-off-by: Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@xxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
 drivers/i2c/chips/twl4030-gpio.c |    5 -----
 1 files changed, 0 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/chips/twl4030-gpio.c b/drivers/i2c/chips/twl4030-gpio.c
index 4d89abc..b51bed0 100644
--- a/drivers/i2c/chips/twl4030-gpio.c
+++ b/drivers/i2c/chips/twl4030-gpio.c
@@ -301,7 +301,6 @@ int twl4030_request_gpio(int gpio)
 	if (gpio_usage_count & (0x1 << gpio))
 		ret = -EBUSY;
 	else {
-		u8 clear_pull[6] = { 0, 0, 0, 0, 0, 0 };
 		/* First time usage? - switch on GPIO module */
 		if (!gpio_usage_count) {
 			ret =
@@ -311,10 +310,6 @@ int twl4030_request_gpio(int gpio)
 		}
 		if (!ret)
 			gpio_usage_count |= (0x1 << gpio);
-
-		ret =
-		twl4030_i2c_write(TWL4030_MODULE_GPIO, clear_pull,
-				REG_GPIOPUPDCTR1, 5);
 	}
 	up(&gpio_sem);
 	return ret;
-- 
1.6.0.2.307.gc427

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux