Hi Zou, These set of patches are meant to work on OMAP3430 SDP with camkit v3, which contains MT9p012 sensor and DW9710 lens driver. We currently have omap zoom ldp board implementation as W.I.P., so it's expected that you don't have your camera sensor detected yet. We'll be posting the patches in this list as soon as we have them ready. This error you're getting for cam_mclk is something which we are working out with the power management team, but it shouldn't be a problem for getting that clock to work. Regards, Sergio -----Original Message----- From: Zou Tao [mailto:zoutao51@xxxxxxxxx] Sent: Tuesday, September 02, 2008 9:56 AM To: Aguirre Rodriguez, Sergio Alberto Cc: linux-omap@xxxxxxxxxxxxxxx Subject: Re: [PATCH 1/15] OMAP3 camera driver: V4L2: Adding IOCTL command to get slave private data. Hi: I'm using omap zoom ldp board, and i enable omap34xx cam option in kernel. My kernel version is v2.6.26-ti-07252008, which including most of the 15 patches, just having minor different. During boot, it reported"Clock cam_mclk didn't enable in 100000 tries", but init has been finished successfully. After booting up , I tried to access /dev/video/0, but kernel reported no such device. Adding debug info, I found that video_device[0] is NULL. and in omap34xxcam_probe() -> v4l2_int_device_register()->v4l2_int_device_try_attach_all()->m->u.master->attach(s) but omap34xxcam_device_register() never been called. so cam failed to register it. Could you give me some advices? Does it work on your board? Aguirre Rodriguez, Sergio Alberto wrote: > >From 0be1009427e55115058bfe72521a2a2811a976e8 Mon Sep 17 00:00:00 2001 > From: Sakari Ailus <sakari.ailus@xxxxxxxxx> > Date: Tue, 15 Apr 2008 10:35:15 +0300 > Subject: [PATCH] Adding IOCTL command to get slave private data. > > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxx> > --- > include/media/v4l2-int-device.h | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h > index c8b80e0..d9a0053 100644 > --- a/include/media/v4l2-int-device.h > +++ b/include/media/v4l2-int-device.h > @@ -184,6 +184,11 @@ enum v4l2_int_ioctl_num { > vidioc_int_dev_exit_num, > /* Set device power state: 0 is off, non-zero is on. */ > vidioc_int_s_power_num, > + /* > + * Get slave private data, e.g. platform-specific slave > + * configuration used by the master. > + */ > + vidioc_int_g_priv_num, > /* Get slave interface parameters. */ > vidioc_int_g_ifparm_num, > /* Does the slave need to be reset after VIDIOC_DQBUF? */ > @@ -267,6 +272,7 @@ V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *); > V4L2_INT_WRAPPER_0(dev_init); > V4L2_INT_WRAPPER_0(dev_exit); > V4L2_INT_WRAPPER_1(s_power, int, ); > +V4L2_INT_WRAPPER_1(g_priv, void, *); > V4L2_INT_WRAPPER_1(g_ifparm, struct v4l2_ifparm, *); > V4L2_INT_WRAPPER_1(g_needs_reset, void, *); > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
