From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
drivers/power/Kconfig | 21 ++
drivers/power/Makefile | 1 +
drivers/power/bq27x00_battery.c | 564 +++++++++++++++++++++++++++++++++++++++
3 files changed, 586 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/bq27x00_battery.c
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9ce5585..18b70fa 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,6 +49,27 @@ config BATTERY_OLPC
help
Say Y to enable support for the battery on the OLPC laptop.
+config BATTERY_BQ27x00
+ tristate "BQ27x00 battery driver"
+ help
+ Say Y here to enable support for batteries with BQ27000 or BQ27200 chip.
+
+config BATTERY_BQ27000
+ bool "BQ27000 battery driver"
+ depends on BATTERY_BQ27x00
+ select W1
+ select W1_SLAVE_BQ27000
+ help
+ Say Y here to enable support for batteries with BQ27000(HDQ) chip.
+
+config BATTERY_BQ27200
+ bool "BQ27200 battery driver"
+ depends on BATTERY_BQ27x00
+ select I2C
+ select I2C_OMAP
+ help
+ Say Y here to enable support for batteries with BQ27200(I2C) chip.
+
config BATTERY_TOSA
tristate "Sharp SL-6000 (tosa) battery"
depends on MACH_TOSA && MFD_TC6393XB
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 4706bf8..dc6cfa3 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,5 +20,6 @@ obj-$(CONFIG_APM_POWER) += apm_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
+obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
new file mode 100644
index 0000000..8b439e8
--- /dev/null
+++ b/drivers/power/bq27x00_battery.c
@@ -0,0 +1,564 @@
+/*
+ * linux/drivers/power/bq27x00_battery.c
+ *
+ * BQ27000/BQ27200 battery driver
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * Author: Texas Instruments
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#ifdef CONFIG_BATTERY_BQ27000
+#include "../w1/w1.h"
+#endif
+#ifdef CONFIG_BATTERY_BQ27200
+#include <linux/i2c.h>
+#endif
+
+#define BQ27x00_REG_TEMP 0x06
+#define BQ27x00_REG_VOLT 0x08
+#define BQ27x00_REG_RSOC 0x0B /* Relative State-of-Charge */
+#define BQ27x00_REG_AI 0x14
+#define BQ27x00_REG_FLAGS 0x0A
+#define HIGH_BYTE(A) ((A) << 8)
+
+#ifdef CONFIG_BATTERY_BQ27000
+extern int w1_bq27000_read(struct device *dev, u8 reg);
+#endif
+
+struct bq27x00_device_info;
+struct bq27x00_access_methods {
+ int (*read)(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di);
+};
+
+struct bq27x00_device_info {
+ struct device *dev;
+#ifdef CONFIG_BATTERY_BQ27000
+ struct device *w1_dev;
+#endif
+#ifdef CONFIG_BATTERY_BQ27200
+ struct i2c_client *client;
+#endif
+ unsigned long update_time;
+ int voltage_uV;
+ int current_uA;
+ int temp_C;
+ int charge_rsoc;
+ struct bq27x00_access_methods *bus;
+ struct power_supply bat;
+ struct delayed_work monitor_work;
+};
+
+static unsigned int cache_time = 60000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+static enum power_supply_property bq27x00_battery_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static int bq27x00_read(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di);
+
+#ifdef CONFIG_BATTERY_BQ27000
+static int bq27000_battery_probe(struct platform_device *dev);
+static int bq27000_battery_remove(struct platform_device *dev);
+#ifdef CONFIG_PM
+static int bq27000_battery_suspend(struct platform_device *dev,
+ pm_message_t state);
+static int bq27000_battery_resume(struct platform_device *dev);
+#endif /* CONFIG_PM */
+
+static struct platform_driver bq27000_battery_driver = {
+ .probe = bq27000_battery_probe,
+ .remove = bq27000_battery_remove,
+#ifdef CONFIG_PM
+ .suspend = bq27000_battery_suspend,
+ .resume = bq27000_battery_resume,
+#endif /* CONFIG_PM */
+ .driver = {
+ .name = "bq27000-battery",
+ },
+};
+#endif /* CONFIG_BATTERY_BQ27000 */
+
+#ifdef CONFIG_BATTERY_BQ27200
+static int bq27200_battery_probe(struct i2c_client *client);
+static int bq27200_battery_remove(struct i2c_client *client);
+#ifdef CONFIG_PM
+static int bq27200_battery_suspend(struct i2c_client *client,
+ pm_message_t mesg);
+static int bq27200_battery_resume(struct i2c_client *client);
+#endif /* CONFIG_PM */
+static struct i2c_driver bq27200_battery_driver = {
+ .driver = {
+ .name = "bq27200-bat",
+ },
+ .probe = bq27200_battery_probe,
+ .remove = bq27200_battery_remove,
+#ifdef CONFIG_PM
+ .suspend = bq27200_battery_suspend,
+ .resume = bq27200_battery_resume,
+#endif /* CONFIG_PM */
+};
+#endif /* CONFIG_BATTERY_BQ27200 */
+
+/*
+ * Return the battery temperature in Celcius degrees
+ * Or < 0 if something fails.
+ */
+static int bq27x00_battery_temperature(struct bq27x00_device_info *di)
+{
+ int ret, temp = 0;
+
+ ret = bq27x00_read(BQ27x00_REG_TEMP, &temp, 0, di);
+ if (ret) {
+ pr_err("BQ27x00 battery driver:"
+ "Error reading temperature from the battery\n");
+ return ret;
+ }
+
+ return (temp >> 2) - 273;
+}
+
+/*
+ * Return the battery Voltage in milivolts
+ * Or < 0 if something fails.
+ */
+static int bq27x00_battery_voltage(struct bq27x00_device_info *di)
+{
+ int ret, volt = 0;
+
+ ret = bq27x00_read(BQ27x00_REG_VOLT, &volt, 0, di);
+ if (ret) {
+ pr_err("BQ27x00 battery driver:"
+ "Error reading battery voltage from the battery\n");
+ return ret;
+ }
+
+ return volt;
+}
+
+/*
+ * Return the battery average current
+ * Note that current can be negative signed as well
+ * Or 0 if something fails.
+ */
+static int bq27x00_battery_current(struct bq27x00_device_info *di)
+{
+ int ret, curr = 0, flags = 0;
+
+ ret = bq27x00_read(BQ27x00_REG_AI, &curr, 0, di);
+ if (ret) {
+ pr_err("BQ27x00 battery driver:"
+ "Error reading current from the battery\n");
+ return 0;
+ }
+ ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
+ if (ret < 0) {
+ pr_err("BQ27x00 battery driver:"
+ "Error reading battery flags\n");
+ return 0;
+ }
+ if ((flags & (1 << 7)) != 0) {
+ pr_debug("Negative current\n");
+ return -curr;
+ } else {
+ return curr;
+ }
+}
+
+/*
+ * Return the battery Relative State-of-Charge
+ * Or < 0 if something fails.
+ */
+static int bq27x00_battery_rsoc(struct bq27x00_device_info *di)
+{
+ int ret, rsoc = 0;
+
+ ret = bq27x00_read(BQ27x00_REG_RSOC, &rsoc, 1, di);
+ if (ret) {
+ pr_err("BQ27x00 battery driver:"
+ "Error reading battery Relative"
+ "State-of-Charge\n");
+ return ret;
+ }
+ return rsoc;
+}
+
+#ifdef CONFIG_BATTERY_BQ27000
+static inline int bq27000_read(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di)
+{
+ u8 val;
+
+ val = w1_bq27000_read(di->w1_dev, reg);
+ *rt_value = val;
+
+ if (!b_single) {
+ val = 0;
+ val = w1_bq27000_read(di->w1_dev, reg + 1);
+ *rt_value += HIGH_BYTE((int) val);
+ }
+
+ return 0;
+}
+#else
+static inline int bq27000_read(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_BATTERY_BQ27200
+static inline int bq27200_read(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di)
+{
+ struct i2c_client *client = di->client;
+ struct i2c_msg msg[1];
+ unsigned char data[2];
+ int err;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ msg->addr = client->addr;
+ msg->flags = 0;
+ msg->len = 1;
+ msg->buf = data;
+
+ data[0] = reg;
+ err = i2c_transfer(client->adapter, msg, 1);
+
+ if (err >= 0) {
+ if (!b_single)
+ msg->len = 2;
+ else
+ msg->len = 1;
+
+ msg->flags = I2C_M_RD;
+ err = i2c_transfer(client->adapter, msg, 1);
+ if (err >= 0) {
+ if (!b_single)
+ *rt_value = data[1] | HIGH_BYTE(data[0]);
+ else
+ *rt_value = data[0];
+
+ return 0;
+ } else {
+ pr_err("BQ27200 I2C read failed\n");
+ return err;
+ }
+ } else {
+ pr_err("BQ27200 I2C write failed\n");
+ return err;
+ }
+}
+#else
+static inline int bq27200_read(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di)
+{
+ return 0;
+}
+#endif
+
+static int bq27x00_read(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di)
+{
+ int ret;
+
+ ret = di->bus->read(reg, rt_value, b_single, di);
+ return ret;
+}
+
+/*
+ * Read the battery temp, voltage, current and relative state of charge.
+ */
+static void bq27x00_battery_read_status(struct bq27x00_device_info *di)
+{
+ if (di->update_time && time_before(jiffies, di->update_time +
+ msecs_to_jiffies(cache_time)))
+ return;
+
+ di->temp_C = bq27x00_battery_temperature(di);
+ di->voltage_uV = bq27x00_battery_voltage(di);
+ di->current_uA = bq27x00_battery_current(di);
+ di->charge_rsoc = bq27x00_battery_rsoc(di);
+
+ di->update_time = jiffies;
+
+ return;
+}
+
+static void bq27x00_battery_work(struct delayed_work *work)
+{
+ struct bq27x00_device_info *di = container_of(work,
+ struct bq27x00_device_info, monitor_work);
+
+ bq27x00_battery_read_status(di);
+ schedule_delayed_work(&di->monitor_work, 100);
+ return;
+}
+
+#define to_bq27x00_device_info(x) container_of((x), \
+ struct bq27x00_device_info, bat);
+
+static int bq27x00_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bq27x00_device_info *di = to_bq27x00_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = di->voltage_uV;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = di->current_uA;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = di->charge_rsoc;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = di->temp_C;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = di->charge_rsoc;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ if (di->voltage_uV == 0)
+ val->intval = 0;
+ else
+ val->intval = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void bq27x00_powersupply_init(struct bq27x00_device_info *di)
+{
+ di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->bat.properties = bq27x00_battery_props;
+ di->bat.num_properties = ARRAY_SIZE(bq27x00_battery_props);
+ di->bat.get_property = bq27x00_battery_get_property;
+ di->bat.external_power_changed = NULL;
+ return;
+}
+
+#ifdef CONFIG_BATTERY_BQ27200
+static int bq27200_battery_probe(struct i2c_client *client)
+{
+ struct bq27x00_device_info *di;
+ struct bq27x00_access_methods *bus;
+ int retval = 0;
+
+ di = kzalloc(sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ pr_err("BQ27000 battery driver:"
+ "Failed to allocate device info structure\n");
+ return -ENOMEM;
+ }
+
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus) {
+ pr_err("BQ27000 battery driver:"
+ "Failed to allocate access method structure\n");
+ kfree(di);
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(client, di);
+ di->dev = &client->dev;
+ di->bat.name = "bq27200";
+ bus->read = &bq27200_read;
+ di->bus = bus;
+ di->client = client;
+
+ bq27x00_powersupply_init(di);
+
+ retval = power_supply_register(&client->dev, &di->bat);
+ if (retval) {
+ pr_err("BQ27200 battery driver: Failed to register battery\n");
+ goto batt_failed;
+ }
+
+ INIT_DELAYED_WORK(&di->monitor_work, bq27x00_battery_work);
+ schedule_delayed_work(&di->monitor_work, 100);
+
+ return 0;
+
+batt_failed:
+ kfree(bus);
+ kfree(di);
+ return retval;
+}
+
+static int bq27200_battery_remove(struct i2c_client *client)
+{
+ struct bq27x00_device_info *di = i2c_get_clientdata(client);
+
+ flush_scheduled_work();
+ power_supply_unregister(&di->bat);
+ kfree(di);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bq27200_battery_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct bq27x00_device_info *di = i2c_get_clientdata(client);
+
+ cancel_delayed_work(&di->monitor_work);
+ return 0;
+}
+
+static int bq27200_battery_resume(struct i2c_client *client)
+{
+ struct bq27x00_device_info *di = i2c_get_clientdata(client);
+
+ schedule_delayed_work(&di->monitor_work, 0);
+ return 0;
+}
+#endif /* CONFIG_PM */
+#endif /* CONFIG_BATTERY_BQ27200 */
+
+#ifdef CONFIG_BATTERY_BQ27000
+static int bq27000_battery_probe(struct platform_device *pdev)
+{
+ struct bq27x00_device_info *di;
+ struct bq27x00_access_methods *bus;
+ int retval = 0;
+
+ di = kzalloc(sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ pr_err("BQ27000 battery driver:"
+ "Failed to allocate device info structure\n");
+ return -ENOMEM;
+ }
+
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus) {
+ pr_err("BQ27000 battery driver:"
+ "Failed to allocate access method structure\n");
+ kfree(di);
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ di->dev = &pdev->dev;
+ di->w1_dev = pdev->dev.parent;
+ di->bat.name = "bq27000";
+ bus->read = &bq27000_read;
+ di->bus = bus;
+
+ bq27x00_powersupply_init(di);
+
+ retval = power_supply_register(&pdev->dev, &di->bat);
+ if (retval) {
+ pr_err("BQ27000 battery driver: Failed to register battery\n");
+ goto batt_failed;
+ }
+
+ INIT_DELAYED_WORK(&di->monitor_work, bq27x00_battery_work);
+ schedule_delayed_work(&di->monitor_work, 50);
+
+ return 0;
+
+batt_failed:
+ kfree(bus);
+ kfree(di);
+ return retval;
+}
+
+static int bq27000_battery_remove(struct platform_device *pdev)
+{
+ struct bq27x00_device_info *di = platform_get_drvdata(pdev);
+
+ flush_scheduled_work();
+ power_supply_unregister(&di->bat);
+ platform_set_drvdata(pdev, NULL);
+ kfree(di);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bq27000_battery_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct bq27x00_device_info *di = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&di->monitor_work);
+ return 0;
+}
+
+static int bq27000_battery_resume(struct platform_device *pdev)
+{
+ struct bq27x00_device_info *di = platform_get_drvdata(pdev);
+
+ schedule_delayed_work(&di->monitor_work, 0);
+ return 0;
+}
+#endif /* CONFIG_PM */
+#endif /* CONFIG_BATTERY_BQ27000 */
+
+static int __init bq27x00_battery_init(void)
+{
+ int status = 0;
+
+#ifdef CONFIG_BATTERY_BQ27000
+ status = platform_driver_register(&bq27000_battery_driver);
+ if (status)
+ printk(KERN_ERR "Unable to register BQ27000 driver\n");
+#endif
+#ifdef CONFIG_BATTERY_BQ27200
+ status = i2c_add_driver(&bq27200_battery_driver);
+ printk(KERN_ERR "Unable to register BQ27200 driver\n");
+#endif
+ return status;
+}
+
+static void __exit bq27x00_battery_exit(void)
+{
+#ifdef CONFIG_BATTERY_BQ27000
+ platform_driver_unregister(&bq27000_battery_driver);
+#endif
+#ifdef CONFIG_BATTERY_BQ27200
+ i2c_del_driver(&bq27200_battery_driver);
+#endif
+}
+
+module_init(bq27x00_battery_init);
+module_exit(bq27x00_battery_exit);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("BQ27x00 battery moniter driver");
+MODULE_LICENSE("GPL");
--
1.6.0.1.141.g445ca
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
