From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
drivers/i2c/chips/Kconfig | 7 +
drivers/i2c/chips/Makefile | 1 +
drivers/i2c/chips/tlv320aic23.c | 675 +++++++++++++++++++++++++++++++++++++++
3 files changed, 683 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/chips/tlv320aic23.c
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index a6269c0..75d8a26 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -137,6 +137,13 @@ config TPS65010
This driver can also be built as a module. If so, the module
will be called tps65010.
+config SENSORS_TLV320AIC23
+ tristate "Texas Instruments TLV320AIC23 Codec"
+ depends on I2C && I2C_OMAP
+ help
+ If you say yes here you get support for the I2C control
+ interface for Texas Instruments TLV320AIC23 audio codec.
+
config GPIOEXPANDER_OMAP
bool "GPIO Expander PCF8574PWR for OMAP"
depends on I2C && (ARCH_OMAP16XX || ARCH_OMAP24XX)
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 616b3f9..32096cb 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_PCF8575) += pcf8575.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
+obj-$(CONFIG_SENSORS_TLV320AIC23) += tlv320aic23.o
obj-$(CONFIG_GPIOEXPANDER_OMAP) += gpio_expander_omap.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
diff --git a/drivers/i2c/chips/tlv320aic23.c b/drivers/i2c/chips/tlv320aic23.c
new file mode 100644
index 0000000..10671e8
--- /dev/null
+++ b/drivers/i2c/chips/tlv320aic23.c
@@ -0,0 +1,675 @@
+/*
+ * Texas Instrumens TLV320AIC23 audio codec's i2c interface.
+ *
+ * Copyright (c) by Kai Svahn <kai.svahn@xxxxxxxxx>
+ * Copyright (c) by Jussi Laako <jussi.laako@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <mach/aic23.h>
+#include <mach/mcbsp.h>
+
+#define TLV320AIC23_VERSION "1.8"
+#define TLV320AIC23_DATE "10-Feb-2006"
+#define MAX_VOL 100
+#define MIN_VOL 0
+#define MAX_GAIN 100
+#define MIN_GAIN 0
+#define OUTPUT_VOLUME_MIN LHV_MIN
+#define OUTPUT_VOLUME_MAX LHV_MAX
+#define OUTPUT_VOLUME_RANGE (OUTPUT_VOLUME_MAX - OUTPUT_VOLUME_MIN)
+#define INPUT_VOLUME_MIN LIV_MIN
+#define INPUT_VOLUME_MAX LIV_MAX
+#define INPUT_VOLUME_RANGE (INPUT_VOLUME_MAX - INPUT_VOLUME_MIN)
+
+/* I2C Addresses to scan */
+static unsigned short normal_i2c[] = { TLV320AIC23ID1, TLV320AIC23ID2, \
+ I2C_CLIENT_END };
+/*static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };*/
+
+/* This makes all addr_data:s */
+I2C_CLIENT_INSMOD;
+
+static struct i2c_driver aic23_driver;
+static struct i2c_client *new_client;
+static int selftest;
+static struct platform_device audio_i2c_device;
+
+static struct aic23_info {
+ u16 volume_reg_left;
+ u16 volume_reg_right;
+ u16 input_gain_reg_left;
+ u16 input_gain_reg_right;
+ u16 power; /* For POWER_DOWN_CONTROL_ADDR */
+ u16 mask; /* For ANALOG_AUDIO_CONTROL_ADDR */
+ int mic_loopback;
+ int mic_enable;
+ int sta;
+ int power_down;
+ int initialized;
+} aic23_info_l;
+
+static int _aic23_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+ u8 val, wreg;
+
+ /* TLV320AIC23 has 7 bit address and 9 bits of data
+ * so we need to switch one data bit into reg and rest
+ * of data into val
+ */
+
+ wreg = (reg << 1);
+ val = (0x01 & (value >> 8));
+ wreg = (wreg | val);
+ val = (0x00ff & value);
+
+ return i2c_smbus_write_byte_data(client, wreg, val);
+}
+
+int aic23_write_value(u8 reg, u16 value)
+{
+ static struct i2c_client *client;
+ client = new_client;
+ _aic23_write_value(client, reg, value);
+
+ return 0;
+}
+
+/*
+ * Configures the McBSP3 which is used to send clock to the AIC23 codec.
+ * The input clock rate from DSP is 12MHz.
+ * The DSP clock must be on before this is called.
+ */
+static int omap_mcbsp3_aic23_clock_init(void)
+{
+ u16 w;
+
+ /* enable 12MHz clock to mcbsp 1 & 3 */
+ __raw_writew(__raw_readw(DSP_IDLECT2) | (1<<1), DSP_IDLECT2);
+ __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1<<1, DSP_RSTCT2);
+
+ /* disable sample rate generator */
+ OMAP_MCBSP_WRITE(OMAP1610_MCBSP3_BASE, SPCR1, 0x0000);
+ OMAP_MCBSP_WRITE(OMAP1610_MCBSP3_BASE, SPCR2, 0x0000);
+
+ /* pin control register */
+ OMAP_MCBSP_WRITE(OMAP1610_MCBSP3_BASE, PCR0,(CLKXM | CLKXP | CLKRP));
+
+ /* configure srg to send 12MHz pulse from dsp peripheral clock */
+ OMAP_MCBSP_WRITE(OMAP1610_MCBSP3_BASE, SRGR1, 0x0000);
+ OMAP_MCBSP_WRITE(OMAP1610_MCBSP3_BASE, SRGR2, CLKSM);
+
+ /* enable sample rate generator */
+ w = OMAP_MCBSP_READ(OMAP1610_MCBSP3_BASE, SPCR2);
+ OMAP_MCBSP_WRITE(OMAP1610_MCBSP3_BASE, SPCR2, (w | FREE | GRST));
+ printk("Clock enabled to MCBSP1 & 3 \n");
+
+ return 0;
+}
+
+static int aic23_detect_client(struct i2c_adapter *adapter, int address,
+ int kind)
+{
+ int err = 0;
+ const char *client_name = "TLV320AIC23 Audio Codec";
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_WRITE_BYTE)) {
+ printk(KERN_WARNING "%s functionality check failed\n",
+ client_name);
+ return err;
+ }
+
+ if (!(new_client = kmalloc(sizeof(struct i2c_client),
+ GFP_KERNEL))) {
+ err = -ENOMEM;
+ printk(KERN_WARNING "Couldn't allocate memory for %s\n",
+ client_name);
+ return err;
+ }
+
+ memset(new_client, 0x00, sizeof(struct i2c_client));
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &aic23_driver;
+ new_client->flags = 0;
+ strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+
+ if ((err = i2c_attach_client(new_client))) {
+ printk(KERN_WARNING "Couldn't attach %s\n", client_name);
+ kfree(new_client);
+ return err;
+ }
+
+ if (platform_device_register(&audio_i2c_device)) {
+ printk(KERN_WARNING "Failed to register audio i2c device\n");
+ selftest = -ENODEV;
+ return selftest;
+ }
+ /* FIXME: Do in board-specific file */
+ omap_mcbsp3_aic23_clock_init();
+
+ if (!aic23_info_l.power_down)
+ aic23_power_up();
+ aic23_info_l.initialized = 1;
+
+ return 0;
+}
+
+static int aic23_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ platform_device_unregister(&audio_i2c_device);
+
+ if ((err = i2c_detach_client(client))) {
+ printk("aic23.o: Client deregistration failed, \
+ client not detached.\n");
+ return err;
+ }
+ kfree(client);
+ return 0;
+}
+
+static int aic23_attach_adapter(struct i2c_adapter *adapter)
+{
+ int res;
+
+ res = i2c_probe(adapter, &addr_data, &aic23_detect_client);
+ return res;
+}
+
+static struct i2c_driver aic23_driver = {
+ .driver = {
+ .name = "OMAP+TLV320AIC23 codec",
+ /*.flags = I2C_DF_NOTIFY,*/
+ },
+ .id = I2C_DRIVERID_MISC, /* Experimental ID */
+ .attach_adapter = aic23_attach_adapter,
+ .detach_client = aic23_detach_client,
+};
+
+static void update_volume_left(int volume)
+{
+ u16 val = 0;
+ val = ((volume * OUTPUT_VOLUME_RANGE) / 100) + OUTPUT_VOLUME_MIN;
+ aic23_write_value(LEFT_CHANNEL_VOLUME_ADDR, val);
+ aic23_info_l.volume_reg_left = volume;
+}
+
+static void update_volume_right(int volume)
+{
+ u16 val = 0;
+ val = ((volume * OUTPUT_VOLUME_RANGE) / 100) + OUTPUT_VOLUME_MIN;
+ aic23_write_value(RIGHT_CHANNEL_VOLUME_ADDR, val);
+ aic23_info_l.volume_reg_right = volume;
+}
+
+static void set_mic(int mic_en)
+{
+ u16 dg_ctrl;
+
+ if (mic_en) {
+ aic23_info_l.power = OSC_OFF | LINE_OFF;
+ dg_ctrl = ADCHP_ON;
+ aic23_info_l.mask &= ~MICM_MUTED;
+ aic23_info_l.mask |= MICB_20DB; /* STE_ENABLED */
+ } else {
+ aic23_info_l.power =
+ OSC_OFF | ADC_OFF | MIC_OFF | LINE_OFF;
+ dg_ctrl = 0x00;
+ aic23_info_l.mask =
+ DAC_SELECTED | INSEL_MIC | MICM_MUTED;
+ }
+ aic23_write_value(POWER_DOWN_CONTROL_ADDR,
+ aic23_info_l.power);
+ aic23_write_value(DIGITAL_AUDIO_CONTROL_ADDR, dg_ctrl);
+ aic23_write_value(ANALOG_AUDIO_CONTROL_ADDR,
+ aic23_info_l.mask);
+ aic23_info_l.mic_enable = mic_en;
+
+ printk(KERN_INFO "aic23 mic state: %i\n", mic_en);
+}
+
+static void aic23_init_power(void)
+{
+ aic23_write_value(RESET_CONTROL_ADDR, 0x00);
+
+ if (aic23_info_l.initialized == 0) {
+ aic23_write_value(LEFT_CHANNEL_VOLUME_ADDR, LHV_MIN);
+ aic23_write_value(RIGHT_CHANNEL_VOLUME_ADDR, LHV_MIN);
+ }
+ else {
+ update_volume_left(aic23_info_l.volume_reg_left);
+ update_volume_right(aic23_info_l.volume_reg_right);
+ }
+
+ aic23_info_l.mask = DAC_SELECTED | INSEL_MIC | MICM_MUTED;
+ aic23_write_value(ANALOG_AUDIO_CONTROL_ADDR,
+ aic23_info_l.mask);
+ aic23_write_value(DIGITAL_AUDIO_CONTROL_ADDR, 0x00);
+ aic23_write_value(DIGITAL_AUDIO_FORMAT_ADDR, LRP_ON | FOR_DSP);
+ aic23_write_value(SAMPLE_RATE_CONTROL_ADDR, USB_CLK_ON);
+ aic23_write_value(DIGITAL_INTERFACE_ACT_ADDR, ACT_ON);
+ aic23_info_l.power = OSC_OFF | ADC_OFF | MIC_OFF | LINE_OFF;
+ aic23_write_value(POWER_DOWN_CONTROL_ADDR,
+ aic23_info_l.power);
+
+ /* enable mic input */
+ if (aic23_info_l.mic_enable)
+ set_mic(aic23_info_l.mic_enable);
+
+ printk(KERN_INFO "aic23_init_power() done\n");
+}
+
+void aic23_power_down(void)
+{
+ if (aic23_info_l.initialized) {
+ printk("aic23 powering down\n");
+ aic23_write_value(POWER_DOWN_CONTROL_ADDR, 0xff);
+ }
+ aic23_info_l.power_down = 1;
+}
+
+void aic23_power_up(void)
+{
+ if (aic23_info_l.initialized) {
+ printk("aic23 powering up\n");
+ aic23_init_power();
+ }
+ aic23_info_l.power_down = 0;
+}
+
+/*----------------------------------------------------------------------*/
+/* sysfs initializations */
+/*----------------------------------------------------------------------*/
+
+static ssize_t store_volume_left(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ signed volume;
+
+ sscanf(buf, "%i", &volume);
+
+ if (volume < MIN_VOL) {
+ aic23_power_down();
+ return count;
+ } else if (volume > MIN_VOL && aic23_info_l.power_down) {
+ aic23_info_l.volume_reg_left = volume;
+ aic23_power_up();
+ return count;
+ }
+ if (volume > MAX_VOL)
+ volume = MAX_VOL;
+
+ update_volume_left(volume);
+ return count;
+}
+
+static ssize_t show_volume_left(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", aic23_info_l.volume_reg_left);
+}
+
+static DEVICE_ATTR(volume_left, S_IRUGO | S_IWUGO,
+ show_volume_left, store_volume_left);
+
+static ssize_t store_volume_right(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ signed volume;
+
+ sscanf(buf, "%i", &volume);
+ if (volume < MIN_VOL) {
+ aic23_power_down();
+ return count;
+ } else if (volume > MIN_VOL && aic23_info_l.power_down) {
+ aic23_info_l.volume_reg_right = volume;
+ aic23_power_up();
+ return count;
+ }
+ if (volume > MAX_VOL)
+ volume = MAX_VOL;
+
+ update_volume_right(volume);
+ return count;
+}
+
+static ssize_t show_volume_right(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", aic23_info_l.volume_reg_right);
+}
+
+static DEVICE_ATTR(volume_right, S_IRUGO | S_IWUGO,
+ show_volume_right, store_volume_right);
+
+static ssize_t store_gain_left(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u16 val = 0;
+ unsigned gain;
+
+ sscanf(buf, "%u", &gain);
+ if (gain > MAX_VOL)
+ gain = MAX_VOL;
+
+ val = ((gain * INPUT_VOLUME_RANGE) / 100) + INPUT_VOLUME_MIN;
+ aic23_write_value(LEFT_LINE_VOLUME_ADDR, val);
+ aic23_info_l.input_gain_reg_left = gain;
+
+ return count;
+}
+
+static ssize_t show_gain_left(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", aic23_info_l.input_gain_reg_left);
+}
+
+static DEVICE_ATTR(gain_left, S_IRUGO | S_IWUSR, show_gain_left,
+ store_gain_left);
+
+static ssize_t store_gain_right(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u16 val = 0;
+ unsigned gain;
+
+ sscanf(buf, "%u", &gain);
+ if (gain > MAX_VOL)
+ gain = MAX_VOL;
+
+ val = ((gain * INPUT_VOLUME_RANGE) / 100) + INPUT_VOLUME_MIN;
+ aic23_write_value(RIGHT_LINE_VOLUME_ADDR, val);
+ aic23_info_l.input_gain_reg_right = gain;
+
+ return count;
+}
+
+static ssize_t show_gain_right(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", aic23_info_l.input_gain_reg_right);
+}
+
+static DEVICE_ATTR(gain_right, S_IRUGO | S_IWUSR, show_gain_right,
+ store_gain_right);
+
+static ssize_t store_mic_loopback(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int mic;
+
+ sscanf(buf, "%i", &mic);
+ if (mic > 0) {
+ aic23_write_value(POWER_DOWN_CONTROL_ADDR, \
+ OSC_OFF | ADC_OFF | LINE_OFF);
+ aic23_info_l.mask = STE_ENABLED | DAC_SELECTED \
+ | INSEL_MIC | MICB_20DB;
+ aic23_write_value(ANALOG_AUDIO_CONTROL_ADDR,
+ aic23_info_l.mask);
+ mic = 1;
+ }
+ else {
+ aic23_write_value(POWER_DOWN_CONTROL_ADDR, \
+ OSC_OFF | ADC_OFF | MIC_OFF | LINE_OFF);
+ mic = 0;
+ }
+ aic23_info_l.mic_loopback = mic;
+
+ return count;
+}
+
+static ssize_t show_mic_loopback(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%i\n", aic23_info_l.mic_loopback);
+}
+
+static DEVICE_ATTR(mic_loopback, S_IRUGO | S_IWUSR,
+ show_mic_loopback, store_mic_loopback);
+
+static ssize_t store_st_attenuation(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned sta;
+ u16 tmp;
+
+ sscanf(buf, "%u", &sta);
+ if (sta > 3)
+ sta = 3;
+
+ tmp = aic23_info_l.mask;
+ tmp &= 0x3f;
+
+ aic23_info_l.mask = tmp | STA_REG(sta);
+ aic23_write_value(ANALOG_AUDIO_CONTROL_ADDR,
+ aic23_info_l.mask);
+ aic23_info_l.sta = sta;
+
+ return count;
+}
+
+static ssize_t show_st_attenuation(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%i\n", aic23_info_l.sta);
+}
+
+static DEVICE_ATTR(st_attenuation, S_IRUGO | S_IWUSR,
+ show_st_attenuation, store_st_attenuation);
+
+static ssize_t store_mic_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int mic;
+
+ sscanf(buf, "%i", &mic);
+ set_mic(mic);
+
+ return count;
+}
+
+static ssize_t show_mic_enable(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%i\n", aic23_info_l.mic_enable);
+}
+
+static DEVICE_ATTR(mic_enable, S_IRUGO | S_IWUSR,
+ show_mic_enable, store_mic_enable);
+
+static ssize_t show_audio_selftest(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%i\n", selftest);
+}
+
+static DEVICE_ATTR(audio_selftest, S_IRUGO | S_IWUSR,
+ show_audio_selftest, NULL);
+
+static int audio_i2c_probe(struct platform_device *dev)
+{
+ int r;
+
+ if ((r = device_create_file(&dev->dev, &dev_attr_volume_left)) != 0)
+ return r;
+ else if ((r = device_create_file(&dev->dev,
+ &dev_attr_volume_right)) != 0)
+ goto err_volume_left;
+ else if ((r = device_create_file(&dev->dev,
+ &dev_attr_gain_right)) != 0)
+ goto err_volume_right;
+ else if ((r = device_create_file(&dev->dev,
+ &dev_attr_gain_left)) != 0)
+ goto err_gain_right;
+ else if ((r = device_create_file(&dev->dev,
+ &dev_attr_mic_loopback)) != 0)
+ goto err_gain_left;
+ else if ((r = device_create_file(&dev->dev,
+ &dev_attr_mic_enable)) != 0)
+ goto err_mic_loopback;
+ else if ((r = device_create_file(&dev->dev,
+ &dev_attr_st_attenuation)) != 0)
+ goto err_mic_enable;
+ else if ((r = device_create_file(&dev->dev,
+ &dev_attr_audio_selftest)) != 0)
+ goto err_st_attenuation;
+ else
+ return r;
+
+err_st_attenuation:
+ device_remove_file(&dev->dev, &dev_attr_st_attenuation);
+err_mic_enable:
+ device_remove_file(&dev->dev, &dev_attr_mic_enable);
+err_mic_loopback:
+ device_remove_file(&dev->dev, &dev_attr_mic_loopback);
+err_gain_left:
+ device_remove_file(&dev->dev, &dev_attr_gain_left);
+err_gain_right:
+ device_remove_file(&dev->dev, &dev_attr_gain_right);
+err_volume_right:
+ device_remove_file(&dev->dev, &dev_attr_volume_right);
+err_volume_left:
+ device_remove_file(&dev->dev, &dev_attr_volume_left);
+
+ return r;
+}
+
+static int audio_i2c_remove(struct platform_device *dev)
+{
+ device_remove_file(&dev->dev, &dev_attr_st_attenuation);
+ device_remove_file(&dev->dev, &dev_attr_mic_enable);
+ device_remove_file(&dev->dev, &dev_attr_mic_loopback);
+ device_remove_file(&dev->dev, &dev_attr_gain_left);
+ device_remove_file(&dev->dev, &dev_attr_gain_right);
+ device_remove_file(&dev->dev, &dev_attr_volume_right);
+ device_remove_file(&dev->dev, &dev_attr_volume_left);
+
+ return 0;
+}
+
+/*----------------------------------------------------------------*/
+/* PM functions */
+/*----------------------------------------------------------------*/
+
+static void audio_i2c_shutdown(struct platform_device *dev)
+{
+ /* Let's mute the codec before powering off to prevent
+ * glitch in the sound
+ */
+ aic23_write_value(LEFT_CHANNEL_VOLUME_ADDR, LHV_MIN);
+ aic23_write_value(RIGHT_CHANNEL_VOLUME_ADDR, LHV_MIN);
+ aic23_power_down();
+}
+
+static int audio_i2c_suspend(struct platform_device *dev, pm_message_t state)
+{
+ /* Let's mute the codec before powering off to prevent
+ * glitch in the sound
+ */
+ aic23_write_value(LEFT_CHANNEL_VOLUME_ADDR, LHV_MIN);
+ aic23_write_value(RIGHT_CHANNEL_VOLUME_ADDR, LHV_MIN);
+ aic23_power_down();
+
+ return 0;
+}
+
+static int audio_i2c_resume(struct platform_device *dev)
+{
+ aic23_power_up();
+
+ return 0;
+}
+
+static struct platform_driver audio_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "audio-i2c",
+ },
+ .shutdown = audio_i2c_shutdown,
+ .probe = audio_i2c_probe,
+ .remove = audio_i2c_remove,
+ .suspend = audio_i2c_suspend,
+ .resume = audio_i2c_resume,
+};
+
+static struct platform_device audio_i2c_device = {
+ .name = "audio-i2c",
+ .id = -1,
+};
+
+/*----------------------------------------------------------------*/
+
+static int __init aic23_init(void)
+{
+ selftest = 0;
+ aic23_info_l.initialized = 0;
+
+ if (i2c_add_driver(&aic23_driver)) {
+ printk("aic23 i2c: Driver registration failed, \
+ module not inserted.\n");
+ selftest = -ENODEV;
+ return selftest;
+ }
+
+ if (platform_driver_register(&audio_i2c_driver)) {
+ printk(KERN_WARNING "Failed to register audio i2c driver\n");
+ selftest = -ENODEV;
+ return selftest;
+ }
+
+ printk("TLV320AIC23 I2C version %s (%s)\n",
+ TLV320AIC23_VERSION, TLV320AIC23_DATE);
+
+ return selftest;
+}
+
+static void __exit aic23_exit(void)
+{
+ aic23_power_down();
+ i2c_del_driver(&aic23_driver);
+
+ platform_driver_unregister(&audio_i2c_driver);
+}
+
+MODULE_AUTHOR("Kai Svahn <kai.svahn@xxxxxxxxx>");
+MODULE_DESCRIPTION("I2C interface for TLV320AIC23 codec.");
+MODULE_LICENSE("GPL");
+
+module_init(aic23_init)
+module_exit(aic23_exit)
+
+EXPORT_SYMBOL(aic23_write_value);
+EXPORT_SYMBOL(aic23_power_up);
+EXPORT_SYMBOL(aic23_power_down);
--
1.6.0.1.141.g445ca
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
