> > So Rajendra sent his uImage and it works quite ok what comes to off > mode on my sdp board. I still see problems with serial console (slow) > and on boot I need to generate manually interrupts to get it to > boot. Otherwise board hangs at this point: > > eth0: link up > Sending DHCP requests ., OK > IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.2.101 > IP-Config: Complete: > device=eth0, addr=192.168.2.101, mask=255.255.255.0, > gw=192.168.2.1, > host=192.168.2.101, domain=ntc.nokia.com, nis-domain=(none), > bootserver=0.0.0.0, rootserver=172.22.146.197, rootpath= > Looking up port of RPC 100003/2 on 172.22.146.197 > Looking up port of RPC 100005/1 on 172.22.146.197 > VFS: Mounted root (nfs filesystem). > Freeing init memory: 108K > > Rajendra, are you still using .config file you sent to me? Are all the > changes in your tree available in l-o list. I tried the same uImage here on my SDP. It goes to off nicely after bootup, but after using the console, VDD2 does not to off anymore. VDD1 does go to off. Cheers, Peter. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
