On Wed, Apr 16, 2008 at 06:08:03PM +0530, Syed Mohammed, Khasim wrote: > > Add new board file for OMAP3 Beagle Board. > > For more info regarding this board visit http://beagleboard.org > > Signed-off-by: Syed Mohammed Khasim <khasim@xxxxxx> > --- > arch/arm/mach-omap2/board-omap3beagle.c | 79 ++++++++++++++++++++++++++++++++ > 1 file changed, 79 insertions(+) > > Index: my_branch/arch/arm/mach-omap2/board-omap3beagle.c > =================================================================== > --- /dev/null 1970-01-01 00:00:00.000000000 +0000 > +++ my_branch/arch/arm/mach-omap2/board-omap3beagle.c 2008-04-16 14:45:52.000000000 +0530 > @@ -0,0 +1,79 @@ > +/* > + * linux/arch/arm/mach-omap2/board-omap3beagle.c > + * > + * Copyright (C) 2008 Texas Instruments > + * > + * Modified from mach-omap2/board-3430sdp.c > + * > + * Initial code: Syed Mohammed Khasim > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/kernel.h> > +#include <linux/init.h> > +#include <linux/platform_device.h> > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/clk.h> > +#include <linux/io.h> > + > +#include <asm/hardware.h> where's the board-omap3beagle.h ? there's only the .c file so hardware.h is not adding anything here? > +#include <asm/mach-types.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > + > +#include <asm/arch/gpio.h> > +#include <asm/arch/board.h> > +#include <asm/arch/common.h> > + > +static struct omap_uart_config omap3_beagle_uart_config __initdata = { > + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > +}; > + > +static int __init omap3_beagle_i2c_init(void) > +{ > + omap_register_i2c_bus(1, 2600, NULL, 0); > + omap_register_i2c_bus(2, 400, NULL, 0); > + omap_register_i2c_bus(3, 400, NULL, 0); > + return 0; > +} > + > +static void __init omap3_beagle_init_irq(void) > +{ > + omap2_init_common_hw(); > + omap_init_irq(); > + omap_gpio_init(); > +} > + > +static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { > + {OMAP_TAG_UART, &omap3_beagle_uart_config }, > +}; > + > +static void __init omap3_beagle_init(void) > +{ > + omap_board_config = omap3_beagle_config; > + omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); > + omap_serial_init(); > +} > + > +arch_initcall(omap3_beagle_i2c_init); > + > +static void __init omap3_beagle_map_io(void) > +{ > + omap2_set_globals_343x(); > + omap2_map_common_io(); > +} > + > +MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") > + /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ > + .phys_io = 0x48000000, > + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, > + .boot_params = 0x80000100, > + .map_io = omap3_beagle_map_io, > + .init_irq = omap3_beagle_init_irq, > + .init_machine = omap3_beagle_init, > + .timer = &omap_timer, > +MACHINE_END > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Best Regards, Felipe Balbi me@xxxxxxxxxxxxxxx http://blog.felipebalbi.com -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
