> -----Original Message----- > From: Francisco Alecrim [mailto:francisco.alecrim@xxxxxxxxxxx] > Sent: Wednesday, April 02, 2008 6:17 AM > To: Madhusudhan Chikkature Rajashekar; linux-omap@xxxxxxxxxxxxxxx > Subject: Re: [RFC/PATH] OMAP: HSMMC: Fixes for 1.8V MMC2 interface > > ext Seth Forshee wrote: > > On Tue, Apr 01, 2008 at 08:44:47PM +0530, Madhusudhan > Chikkature Rajashekar wrote: > > > >> Hi, > >> > >> I did not see any board level code to power up the second > slot along with this patch. > >> Where is the code that enables 1.8V to the second slot? > >> > > > > I am working with a custom board that isn't supported in > the git repo, and I > > don't have access to any other board that I could test such > changes with. > > These are just the chages I found were necessary to support > the 1.8V-only > > host, regardless of whatever board support is needed. > > That's the same problem here!! I have a custom board too!! However, > pushing patches [1] and [2] we will be able to enable the second > controller with some modifications in board-sdp-mmc.c. Yes. That?s what I meant. Some changes in the sdp board file would be required to Enable power to slot2 through triton LDOs. Currently I am tied up with some work, I will patch that when I get some time unless someone else sends a patch by then. > > [1] - OMAP: HSMMC: Fixes for 1.8V MMC2 interface > [2] - [PATCH 1/1] PLAT: OMAP: Add device configuration to > support second > HSMMC slot on OMAP 2430 and 3430 boards. > > -- > Francisco Keppler Silva Alecrim - INdT > Phone: +55 92 2126-1017 > Mobile: +55 92 9152-7000 > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
