On Wed, Mar 26, 2008 at 11:33:45AM -0400, Eduardo Valentin wrote:
> From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
>
> Misc clean up in omap_hsmmc.c to beautify debugging output.
>
> Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Here you should put what you changed just to ease the comparisson :-)
But ok... thanks for checking it :-)
> Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxxxxxxx>
> ---
> drivers/mmc/host/omap_hsmmc.c | 14 +++++++-------
> 1 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 3d4a7d1..70f6895 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -146,7 +146,7 @@ static void omap_mmc_stop_clock(struct mmc_omap_host *host)
> OMAP_HSMMC_WRITE(host->base, SYSCTL,
> OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
> if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
> - dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped");
> + dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
> }
>
> /*
> @@ -401,7 +401,7 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
>
> return 0;
> err:
> - dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage \n");
> + dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
> return ret;
> }
>
> @@ -760,11 +760,11 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
> * MMC can still work without debounce clock.
> */
> if (IS_ERR(host->dbclk))
> - dev_dbg(mmc_dev(host->mmc), "Failed to get debounce clock \n");
> + dev_dbg(mmc_dev(host->mmc), "Failed to get debounce clock\n");
> else
> if (clk_enable(host->dbclk) != 0)
> dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
> - "clk failed\n");
> + " clk failed\n");
> else
> host->dbclk_enabled = 1;
>
> @@ -793,7 +793,7 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
> ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, pdev->name,
> host);
> if (ret) {
> - dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ");
> + dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
> goto irq_err;
> }
>
> @@ -820,7 +820,7 @@ err:
> return ret;
>
> irq_err:
> - dev_dbg(mmc_dev(host->mmc), "Unable to configure MMC IRQs");
> + dev_dbg(mmc_dev(host->mmc), "Unable to configure MMC IRQs\n");
> clk_disable(host->fclk);
> clk_disable(host->iclk);
> clk_put(host->fclk);
> @@ -881,7 +881,7 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
> if (ret)
> dev_dbg(mmc_dev(host->mmc),
> "Unable to handle MMC board"
> - "level suspend\n");
> + " level suspend\n");
>
> if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
> OMAP_HSMMC_WRITE(host->base, HCTL,
> --
> 1.5.4.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Felipe Balbi
me@xxxxxxxxxxxxxxx
http://blog.felipebalbi.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
