[PATCH 2/3] This patch adds EHCI platform specific data to OMAP34xx board file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds the OMAP EHCI board specific information

Signed-off-by: Vikram Pandita <vikram.pandita@xxxxxx>
Acked-by: Kamat, Nishant <nskamat@xxxxxx>
Acked-by: David, Brownell <david-b@xxxxxxxxxxx>
---
 arch/arm/mach-omap2/board-3430sdp-usb.c |  139 ++++++++++++++++++++++++++++++++
 1 file changed, 139 insertions(+)

Index: omap-submit/arch/arm/mach-omap2/board-3430sdp-usb.c
===================================================================
--- omap-submit.orig/arch/arm/mach-omap2/board-3430sdp-usb.c	2008-01-31 12:04:11.000000000 +0530
+++ omap-submit/arch/arm/mach-omap2/board-3430sdp-usb.c	2008-01-31 12:08:12.000000000 +0530
@@ -16,6 +16,8 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
 #include <linux/usb/musb.h>
 
 #include <asm/arch/hardware.h>
@@ -66,6 +68,130 @@
 };
 #endif
 
+
+/* EHCI platform specific data */
+
+#if	defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+static struct resource ehci_resources[] = {
+	[0] = {
+		.start   = OMAP34XX_HSUSB_HOST_BASE + 0x800,
+		.end     = OMAP34XX_HSUSB_HOST_BASE + 0x800 + SZ_1K,
+		.flags   = IORESOURCE_MEM,
+	},
+	[1] = {         /* general IRQ */
+		.start   = INT_34XX_EHCI_IRQ,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+static struct platform_device ehci_device = {
+	.name           = "ehci-omap",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &ehci_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data          = 0x0,
+	},
+	.num_resources  = ARRAY_SIZE(ehci_resources),
+	.resource       = ehci_resources,
+};
+
+
+/* MUX settings for EHCI pins */
+/*
+ * setup_ehci_io_mux - initialize IO pad mux for USBHOST
+ */
+static void setup_ehci_io_mux(void)
+{
+#ifdef CONFIG_OMAP_EHCI_PHY_MODE
+	/* PHY mode of operation for board: 750-2083-001
+	 * ISP1504 connected to Port1 and Port2
+	 * Do Func Mux setting for 12-pin ULPI PHY mode
+	 */
+
+	/* Port1 */
+	omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
+	omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
+	omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
+	omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
+	omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
+	omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
+	omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
+	omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
+	omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
+	omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
+	omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
+	omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
+
+	/* Port2 */
+	omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
+	omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
+	omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
+	omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
+	omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
+	omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
+	omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
+	omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
+	omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
+	omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
+	omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
+	omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
+
+#else
+	/* Set Func mux for :
+	 * TLL mode of operation
+	 * 12-pin ULPI SDR TLL mode for Port1/2/3
+	 */
+
+	/* Port1 */
+	omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
+	omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
+	omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
+	omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
+	omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
+	omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
+	omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
+	omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
+	omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
+	omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
+	omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
+	omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
+
+	/* Port2 */
+	omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
+	omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
+	omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
+	omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
+	omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
+	omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
+	omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
+	omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
+	omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
+	omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
+	omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
+	omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
+
+	/* Port3 */
+	omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
+	omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
+	omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
+	omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
+	omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
+	omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
+	omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
+	omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
+	omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
+	omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
+	omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
+	omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
+#endif /* CONFIG_OMAP_EHCI_PHY_MODE */
+
+	return;
+}
+
+#endif /* EHCI specific data */
+
 void __init sdp3430_usb_init(void)
 {
 #ifdef CONFIG_USB_MUSB_SOC
@@ -74,4 +200,17 @@
 		return;
 	}
 #endif
+
+#if     defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+
+	/* Setup Pin IO MUX for EHCI */
+	setup_ehci_io_mux();
+
+	if (platform_device_register(&ehci_device) < 0) {
+		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
+		return;
+	}
+#endif
+
 }
+
-
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux