Re: Regression in xfstests on tmpfs-backed NFS exports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Apr 6, 2022, at 8:18 PM, Hugh Dickins <hughd@xxxxxxxxxx> wrote:
> 
> On Wed, 6 Apr 2022, Chuck Lever III wrote:
> 
>> Good day, Hugh-
> 
> Huh! If you were really wishing me a good day, would you tell me this ;-?
> 
>> 
>> I noticed that several fsx-related tests in the xfstests suite are
>> failing after updating my NFS server to v5.18-rc1. I normally test
>> against xfs, ext4, btrfs, and tmpfs exports. tmpfs is the only export
>> that sees these new failures:
>> 
>> generic/075 2s ... [failed, exit status 1]- output mismatch (see /home/cel/src/xfstests/results//generic/075.out.bad)
>>    --- tests/generic/075.out	2014-02-13 15:40:45.000000000 -0500
>>    +++ /home/cel/src/xfstests/results//generic/075.out.bad	2022-04-05 16:39:59.145991520 -0400
>>    @@ -4,15 +4,5 @@
>>     -----------------------------------------------
>>     fsx.0 : -d -N numops -S 0
>>     -----------------------------------------------
>>    -
>>    ------------------------------------------------
>>    -fsx.1 : -d -N numops -S 0 -x
>>    ------------------------------------------------
>>    ...
>>    (Run 'diff -u /home/cel/src/xfstests/tests/generic/075.out /home/cel/src/xfstests/results//generic/075.out.bad'  to see the entire diff)
>> 
>> generic/091 9s ... [failed, exit status 1]- output mismatch (see /home/cel/src/xfstests/results//generic/091.out.bad)
>>    --- tests/generic/091.out	2014-02-13 15:40:45.000000000 -0500
>>    +++ /home/cel/src/xfstests/results//generic/091.out.bad	2022-04-05 16:41:24.329063277 -0400
>>    @@ -1,7 +1,75 @@
>>     QA output created by 091
>>     fsx -N 10000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
>>    -fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
>>    -fsx -N 10000 -o 32768 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
>>    -fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
>>    -fsx -N 10000 -o 32768 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
>>    -fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -W
>>    ...
>>    (Run 'diff -u /home/cel/src/xfstests/tests/generic/091.out /home/cel/src/xfstests/results//generic/091.out.bad'  to see the entire diff)
>> 
>> generic/112 2s ... [failed, exit status 1]- output mismatch (see /home/cel/src/xfstests/results//generic/112.out.bad)
>>    --- tests/generic/112.out	2014-02-13 15:40:45.000000000 -0500
>>    +++ /home/cel/src/xfstests/results//generic/112.out.bad	2022-04-05 16:41:38.511075170 -0400
>>    @@ -4,15 +4,4 @@
>>     -----------------------------------------------
>>     fsx.0 : -A -d -N numops -S 0
>>     -----------------------------------------------
>>    -
>>    ------------------------------------------------
>>    -fsx.1 : -A -d -N numops -S 0 -x
>>    ------------------------------------------------
>>    ...
>>    (Run 'diff -u /home/cel/src/xfstests/tests/generic/112.out /home/cel/src/xfstests/results//generic/112.out.bad'  to see the entire diff)
>> 
>> generic/127 49s ... - output mismatch (see /home/cel/src/xfstests/results//generic/127.out.bad)
>>    --- tests/generic/127.out	2016-08-28 12:16:20.000000000 -0400
>>    +++ /home/cel/src/xfstests/results//generic/127.out.bad	2022-04-05 16:42:07.655099652 -0400
>>    @@ -4,10 +4,198 @@
>>     === FSX Light Mode, Memory Mapping ===
>>     All 100000 operations completed A-OK!
>>     === FSX Standard Mode, No Memory Mapping ===
>>    -All 100000 operations completed A-OK!
>>    +ltp/fsx -q -l 262144 -o 65536 -S 191110531 -N 100000 -R -W fsx_std_nommap
>>    +READ BAD DATA: offset = 0x9cb7, size = 0xfae3, fname = /tmp/mnt/manet.ib-2323703/fsx_std_nommap
>>    +OFFSET	GOOD	BAD	RANGE
>>    ...
>>    (Run 'diff -u /home/cel/src/xfstests/tests/generic/127.out /home/cel/src/xfstests/results//generic/127.out.bad'  to see the entire diff)
>> 
>> I bisected the problem to:
>> 
>>  56a8c8eb1eaf ("tmpfs: do not allocate pages on read")
>> 
>> generic/075 fails almost immediately without any NFS-level errors.
>> Likely this is data corruption rather than an overt I/O error.
> 
> That's sad.  Thanks for bisecting and reporting.  Sorry for the nuisance.
> 
> I suspect this patch is heading for a revert, because I shall not have
> time to debug and investigate.  Cc'ing fsdevel and a few people who have
> an interest in it, to warn of that likely upcoming revert.
> 
> But if it's okay with everyone, please may we leave it in for -rc2?
> Given that having it in -rc1 already smoked out another issue (problem
> of SetPageUptodate(ZERO_PAGE(0)) without CONFIG_MMU), I think keeping
> it in a little longer might smoke out even more.
> 
> The xfstests info above doesn't actually tell very much, beyond that
> generic/075 generic/091 generic/112 generic/127, each a test with fsx,
> all fall at their first hurdle.  If you have time, please rerun and
> tar up the results/generic directory (maybe filter just those failing)
> and send as attachment.  But don't go to any trouble, it's unlikely
> that I shall even untar it - it would be mainly to go on record if
> anyone has time to look into it later.  And, frankly, it's unlikely
> to tell us anything more enlightening, than that the data seen was
> not as expected: which we do already know.
> 
> I've had no problem with xfstests generic 075,091,112,127 testing
> tmpfs here, not before and not in the month or two I've had that
> patch in: so it's something in the way that NFS exercises tmpfs
> that reveals it.  If I had time to duplicate your procedure, I'd be
> asking for detailed instructions: but no, I won't have a chance.
> 
> But I can sit here and try to guess.  I notice fs/nfsd checks
> file->f_op->splice_read, and employs fallback if not available:
> if you have time, please try rerunning those xfstests on an -rc1
> kernel, but with mm/shmem.c's .splice_read line commented out.
> My guess is that will then pass the tests, and we shall know more.

This seemed like the most probative next step, so I commented
out the .splice_read call-out in mm/shmem.c and ran the tests
again. Yes, that change enables the fsx-related tests to pass
as expected.


> What could be going wrong there?  I've thought of two possibilities.
> A minor, hopefully easily fixed, issue would be if fs/nfsd has
> trouble with seeing the same page twice in a row: since tmpfs is
> now using the ZERO_PAGE(0) for all pages of a hole, and I think I
> caught sight of code which looks to see if the latest page is the
> same as the one before.  It's easy to imagine that might go wrong.

Are you referring to this function in fs/nfsd/vfs.c ?

 847 static int
 848 nfsd_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 849                   struct splice_desc *sd)
 850 {
 851         struct svc_rqst *rqstp = sd->u.data;
 852         struct page **pp = rqstp->rq_next_page;
 853         struct page *page = buf->page;
 854 
 855         if (rqstp->rq_res.page_len == 0) {
 856                 svc_rqst_replace_page(rqstp, page);
 857                 rqstp->rq_res.page_base = buf->offset;
 858         } else if (page != pp[-1]) {
 859                 svc_rqst_replace_page(rqstp, page);
 860         }
 861         rqstp->rq_res.page_len += sd->len;
 862 
 863         return sd->len;
 864 }

rq_next_page should point to the first unused element of
rqstp->rq_pages, so IIUC that check is looking for the
final page that is part of the READ payload.

But that does suggest that if page -> ZERO_PAGE and so does
pp[-1], then svc_rqst_replace_page() would not be invoked.


> A more difficult issue would be, if fsx is racing writes and reads,
> in a way that it can guarantee the correct result, but that correct
> result is no longer delivered: because the writes go into freshly
> allocated tmpfs cache pages, while reads are still delivering
> stale ZERO_PAGEs from the pipe.  I'm hazy on the guarantees there.
> 
> But unless someone has time to help out, we're heading for a revert.
> 
> Thanks,
> Hugh

--
Chuck Lever







[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux