David Warren wrote: > I finally got in when it was hung and got one. It is attached. Cc: Corrected (Please don't exclude Cc list while replying) > Suresh Jayaraman wrote: >> David Warren wrote: >> >>> We are seeing nfsd getting stuck in d wait at boot time. The fix seems >>> to be stopping in single user mode prior to nfs starting, renaming >>> /var/lib/nfs/v4recovery/ and making a new one, then letting the system >>> continue. When it boots and hangs, all processes that touch >>> /var/lib/nfs/v4recovery/ go into D-wait. However, if you rename it and >>> >> (Cc fixed) >> >> Can you get a Sysrq + w output by doing either >> echo w > /proc/sysrq-trigger >> (or) >> Sysrq + w (hold Sysrq key and press 'w') >> and capture dmesg output and attach? >> >> It you could not get a shell, you could try to disable NFS during boot >> and try to start NFS once the machine boots and then try. >> Is the NFS server running inside a Virtual machine? >> >> >> Thanks, >> >> -- Suresh Jayaraman
: 0009a800/0009a800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.28.7 (root@t) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sun Mar 1 20:38:25 PST 2009 [ 0.000000] Command line: root=/dev/md0 ro console=ttyS1,19200,n8 console=tty0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a800 (usable) [ 0.000000] BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable) [ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xcff60 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff60000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff60000 page 4k [ 0.000000] kernel direct mapping tables up to cff60000 @ 10000-16000 [ 0.000000] last_map_addr: cff60000 end: cff60000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000 [ 0.000000] last_map_addr: 130000000 end: 130000000 [ 0.000000] RAMDISK: 37b5a000 - 37fef8d0 [ 0.000000] ACPI: RSDP 000F6100, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT CFF6265B, 005C (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF68E48, 0074 (r1 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF64A44, 4404 (r1 Intel BLAKFORD 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS CFF69FC0, 0040 [ 0.000000] ACPI: APIC CFF68EBC, 0090 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF68F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF68F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF68FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF63F2A, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT CFF63E84, 00A6 (r1 PmRef Cpu7Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT CFF63DDE, 00A6 (r1 PmRef Cpu6Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT CFF63D38, 00A6 (r1 PmRef Cpu5Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT CFF63C92, 00A6 (r1 PmRef Cpu4Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT CFF63BEC, 00A6 (r1 PmRef Cpu3Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT CFF63B46, 00A6 (r1 PmRef Cpu2Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT CFF63AA0, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT CFF626B7, 13E9 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000647f38] TEXT DATA BSS ==> [0000200000 - 0000647f38] [ 0.000000] #3 [0037b5a000 - 0037fef8d0] RAMDISK ==> [0037b5a000 - 0037fef8d0] [ 0.000000] #4 [000009a800 - 0000100000] BIOS reserved ==> [000009a800 - 0000100000] [ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000f6130] 000f6130 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cff60 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048298 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1206 pages reserved [ 0.000000] DMA zone: 2716 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833432 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff60000 - 00000000cff69000 [ 0.000000] PM: Registered nosave memory: 00000000cff69000 - 00000000cff80000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030068 [ 0.000000] Kernel command line: root=/dev/md0 ro console=ttyS1,19200,n8 console=tty0 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 2000.033 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS1] enabled [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 4042592k/4980736k available (2251k kernel code, 787544k absent, 149680k reserved, 1164k data, 296k init) [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.06 BogoMIPS (lpj=8000132) [ 0.012038] Security Framework initialized [ 0.016008] SELinux: Disabled at boot. [ 0.020017] Mount-cache hash table entries: 256 [ 0.024126] Initializing cgroup subsys ns [ 0.028004] Initializing cgroup subsys cpuacct [ 0.032020] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.040002] CPU: L2 cache: 6144K [ 0.044004] CPU: Physical Processor ID: 0 [ 0.048002] CPU: Processor Core ID: 0 [ 0.052007] CPU0: Thermal monitoring handled by SMI [ 0.052009] using mwait in idle threads. [ 0.056019] ACPI: Core revision 20080926 [ 0.070250] Setting APIC routing to flat [ 0.072432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.117916] CPU0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 [ 0.132001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4000.23 BogoMIPS (lpj=8000470) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.224097] CPU1: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 [ 0.236018] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.240129] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 4000.24 BogoMIPS (lpj=8000493) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.332060] CPU2: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 [ 0.344019] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.348077] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 4000.22 BogoMIPS (lpj=8000458) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.444039] CPU3: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 [ 0.456019] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.460020] Brought up 4 CPUs [ 0.464003] Total of 4 processors activated (16000.77 BogoMIPS). [ 0.468079] net_namespace: 1328 bytes [ 0.472108] NET: Registered protocol family 16 [ 0.476029] ACPI: bus type pci registered [ 0.480031] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 10 [ 0.484004] PCI: MCFG area at e0000000 reserved in E820 [ 0.492231] PCI: Using MMCONFIG at e0000000 - e0afffff [ 0.496003] PCI: Using configuration type 1 for base access [ 0.500369] ACPI: EC: Look up EC in DSDT [ 0.505171] ACPI: Interpreter enabled [ 0.508004] ACPI: (supports S0 S1 S4 S5) [ 0.517661] ACPI: Using IOAPIC for interrupt routing [ 0.524386] ACPI: No dock devices found. [ 0.528014] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.532041] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.536005] pci 0000:00:00.0: PME# disabled [ 0.540032] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.544004] pci 0000:00:02.0: PME# disabled [ 0.548030] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.552004] pci 0000:00:04.0: PME# disabled [ 0.556030] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.560004] pci 0000:00:06.0: PME# disabled [ 0.564023] pci 0000:00:08.0: reg 10 64bit mmio: [0xda700000-0xda7003ff] [ 0.564039] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 0.568004] pci 0000:00:08.0: PME# disabled [ 0.572200] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.576005] pci 0000:00:1c.0: PME# disabled [ 0.580045] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.580086] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.580127] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.580173] pci 0000:00:1d.7: reg 10 32bit mmio: [0xda700400-0xda7007ff] [ 0.580207] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.584005] pci 0000:00:1d.7: PME# disabled [ 0.588095] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.588113] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.588119] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.588124] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.588130] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.588135] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] [ 0.588174] pci 0000:00:1f.2: reg 10 io port: [0x18a0-0x18a7] [ 0.588179] pci 0000:00:1f.2: reg 14 io port: [0x1874-0x1877] [ 0.588184] pci 0000:00:1f.2: reg 18 io port: [0x1878-0x187f] [ 0.588189] pci 0000:00:1f.2: reg 1c io port: [0x1870-0x1873] [ 0.588194] pci 0000:00:1f.2: reg 20 io port: [0x1880-0x189f] [ 0.588199] pci 0000:00:1f.2: reg 24 32bit mmio: [0xda700800-0xda700bff] [ 0.588209] pci 0000:00:1f.2: PME# supported from D3hot [ 0.592005] pci 0000:00:1f.2: PME# disabled [ 0.596044] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] [ 0.596094] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.600004] pci 0000:01:00.0: PME# disabled [ 0.604036] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold [ 0.608004] pci 0000:01:00.3: PME# disabled [ 0.612040] pci 0000:00:02.0: bridge io port: [0x2000-0x2fff] [ 0.612043] pci 0000:00:02.0: bridge 32bit mmio: [0xda000000-0xda1fffff] [ 0.612078] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.616004] pci 0000:02:00.0: PME# disabled [ 0.620041] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.624004] pci 0000:02:02.0: PME# disabled [ 0.628034] pci 0000:01:00.0: bridge io port: [0x2000-0x2fff] [ 0.628037] pci 0000:01:00.0: bridge 32bit mmio: [0xda000000-0xda0fffff] [ 0.628072] pci 0000:03:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.632023] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.636005] pci 0000:03:00.0: PME# disabled [ 0.640046] pci 0000:03:00.2: PXH quirk detected; SHPC device MSI disabled [ 0.644023] pci 0000:03:00.2: PME# supported from D0 D3hot D3cold [ 0.648005] pci 0000:03:00.2: PME# disabled [ 0.652179] pci 0000:06:00.0: reg 10 32bit mmio: [0xda020000-0xda03ffff] [ 0.652186] pci 0000:06:00.0: reg 14 32bit mmio: [0xda000000-0xda01ffff] [ 0.652192] pci 0000:06:00.0: reg 18 io port: [0x2000-0x201f] [ 0.652212] pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.652221] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.656005] pci 0000:06:00.0: PME# disabled [ 0.660046] pci 0000:06:00.1: reg 10 32bit mmio: [0xda060000-0xda07ffff] [ 0.660052] pci 0000:06:00.1: reg 14 32bit mmio: [0xda040000-0xda05ffff] [ 0.660058] pci 0000:06:00.1: reg 18 io port: [0x2020-0x203f] [ 0.660078] pci 0000:06:00.1: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.660087] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 0.664005] pci 0000:06:00.1: PME# disabled [ 0.668043] pci 0000:02:02.0: bridge io port: [0x2000-0x2fff] [ 0.668046] pci 0000:02:02.0: bridge 32bit mmio: [0xda000000-0xda0fffff] [ 0.668155] pci 0000:08:00.0: reg 10 32bit mmio: [0xda220000-0xda23ffff] [ 0.668165] pci 0000:08:00.0: reg 14 32bit mmio: [0xda200000-0xda21ffff] [ 0.668174] pci 0000:08:00.0: reg 18 io port: [0x3000-0x301f] [ 0.668205] pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.668219] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.672007] pci 0000:08:00.0: PME# disabled [ 0.676048] pci 0000:00:04.0: bridge io port: [0x3000-0x3fff] [ 0.676051] pci 0000:00:04.0: bridge 32bit mmio: [0xda200000-0xda2fffff] [ 0.676083] pci 0000:09:00.0: reg 10 64bit mmio: [0xd8000000-0xd9ffffff] [ 0.676091] pci 0000:09:00.0: reg 18 64bit mmio: [0xda300000-0xda300fff] [ 0.676096] pci 0000:09:00.0: reg 20 io port: [0x4000-0x40ff] [ 0.676104] pci 0000:09:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.676111] pci 0000:09:00.0: supports D1 D2 [ 0.676146] pci 0000:00:06.0: bridge io port: [0x4000-0x4fff] [ 0.676149] pci 0000:00:06.0: bridge 32bit mmio: [0xda300000-0xda3fffff] [ 0.676153] pci 0000:00:06.0: bridge 64bit mmio pref: [0xd8000000-0xd9ffffff] [ 0.676224] pci 0000:0b:01.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.676230] pci 0000:0b:01.0: reg 14 io port: [0x5000-0x50ff] [ 0.676236] pci 0000:0b:01.0: reg 18 32bit mmio: [0xda400000-0xda40ffff] [ 0.676256] pci 0000:0b:01.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.676265] pci 0000:0b:01.0: supports D1 D2 [ 0.676306] pci 0000:00:1e.0: transparent bridge [ 0.680005] pci 0000:00:1e.0: bridge io port: [0x5000-0x5fff] [ 0.680008] pci 0000:00:1e.0: bridge 32bit mmio: [0xda400000-0xda4fffff] [ 0.680014] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.680030] bus 00 -> node 0 [ 0.680035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.680621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.680693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT] [ 0.680781] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0.PXH0._PRT] [ 0.680924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0.PXH1._PRT] [ 0.681037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT] [ 0.681122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT] [ 0.684071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.684195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.684317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.684446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.688243] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9 [ 0.709229] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.728087] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.749850] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.768025] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.796086] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 0.820087] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.845226] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 0.865187] usbcore: registered new interface driver usbfs [ 0.868018] usbcore: registered new interface driver hub [ 0.872018] usbcore: registered new device driver usb [ 0.876022] PCI: Using ACPI for IRQ routing [ 0.896145] hpet clockevent registered [ 0.896148] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.900006] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.912004] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.944010] pnp: PnP ACPI init [ 0.962376] ACPI: bus type pnp registered [ 0.990422] pnp: PnP ACPI: found 13 devices [ 1.015517] ACPI: ACPI bus type pnp unregistered [ 1.043237] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.081345] system 00:01: ioport range 0x295-0x296 has been reserved [ 1.119461] system 00:01: ioport range 0xca2-0xca3 has been reserved [ 1.157577] system 00:01: ioport range 0xca8-0xcaf has been reserved [ 1.195692] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.234846] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 1.274001] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.312117] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 1.351272] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 1.394068] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 1.438945] system 00:01: iomem range 0xfec80000-0xfec80fff has been reserved [ 1.481739] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.524535] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 1.567329] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 1.615177] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.650683] pci 0000:03:00.0: IO window: disabled [ 1.679962] pci 0000:03:00.0: MEM window: disabled [ 1.709756] pci 0000:03:00.0: PREFETCH window: disabled [ 1.742153] pci 0000:03:00.2: PCI bridge, secondary bus 0000:05 [ 1.777666] pci 0000:03:00.2: IO window: disabled [ 1.806943] pci 0000:03:00.2: MEM window: disabled [ 1.836737] pci 0000:03:00.2: PREFETCH window: disabled [ 1.869136] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 [ 1.904648] pci 0000:02:00.0: IO window: disabled [ 1.934068] pci 0000:02:00.0: MEM window: disabled [ 1.963823] pci 0000:02:00.0: PREFETCH window: disabled [ 1.996221] pci 0000:02:02.0: PCI bridge, secondary bus 0000:06 [ 2.031733] pci 0000:02:02.0: IO window: 0x2000-0x2fff [ 2.063611] pci 0000:02:02.0: MEM window: 0xda000000-0xda0fffff [ 2.100166] pci 0000:02:02.0: PREFETCH window: 0x000000da500000-0x000000da5fffff [ 2.145563] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 2.181076] pci 0000:01:00.0: IO window: 0x2000-0x2fff [ 2.212951] pci 0000:01:00.0: MEM window: 0xda000000-0xda0fffff [ 2.249506] pci 0000:01:00.0: PREFETCH window: 0x000000da500000-0x000000da5fffff [ 2.294904] pci 0000:01:00.3: PCI bridge, secondary bus 0000:07 [ 2.330416] pci 0000:01:00.3: IO window: disabled [ 2.359694] pci 0000:01:00.3: MEM window: disabled [ 2.389488] pci 0000:01:00.3: PREFETCH window: disabled [ 2.421886] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 2.457399] pci 0000:00:02.0: IO window: 0x2000-0x2fff [ 2.489275] pci 0000:00:02.0: MEM window: 0xda000000-0xda1fffff [ 2.525830] pci 0000:00:02.0: PREFETCH window: 0x000000da500000-0x000000da5fffff [ 2.571228] pci 0000:00:04.0: PCI bridge, secondary bus 0000:08 [ 2.606740] pci 0000:00:04.0: IO window: 0x3000-0x3fff [ 2.638616] pci 0000:00:04.0: MEM window: 0xda200000-0xda2fffff [ 2.675171] pci 0000:00:04.0: PREFETCH window: 0x000000da600000-0x000000da6fffff [ 2.720568] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09 [ 2.756081] pci 0000:00:06.0: IO window: 0x4000-0x4fff [ 2.787959] pci 0000:00:06.0: MEM window: 0xda300000-0xda3fffff [ 2.824513] pci 0000:00:06.0: PREFETCH window: 0x000000d8000000-0x000000d9ffffff [ 2.869910] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0a [ 2.905421] pci 0000:00:1c.0: IO window: disabled [ 2.934700] pci 0000:00:1c.0: MEM window: disabled [ 2.964494] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.996893] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b [ 3.032405] pci 0000:00:1e.0: IO window: 0x5000-0x5fff [ 3.064283] pci 0000:00:1e.0: MEM window: 0xda400000-0xda4fffff [ 3.100836] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 3.146243] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.186427] pci 0000:00:02.0: setting latency timer to 64 [ 3.186432] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.226622] pci 0000:01:00.0: setting latency timer to 64 [ 3.226628] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.266818] pci 0000:02:00.0: setting latency timer to 64 [ 3.266826] pci 0000:03:00.0: setting latency timer to 64 [ 3.266833] pci 0000:03:00.2: setting latency timer to 64 [ 3.266840] pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.307014] pci 0000:02:02.0: setting latency timer to 64 [ 3.307020] pci 0000:01:00.3: setting latency timer to 64 [ 3.307025] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.347207] pci 0000:00:04.0: setting latency timer to 64 [ 3.347211] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.387403] pci 0000:00:06.0: setting latency timer to 64 [ 3.387410] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.427600] pci 0000:00:1c.0: setting latency timer to 64 [ 3.427605] pci 0000:00:1e.0: setting latency timer to 64 [ 3.427608] bus: 00 index 0 io port: [0x00-0xffff] [ 3.456353] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 3.491868] bus: 01 index 0 io port: [0x2000-0x2fff] [ 3.521664] bus: 01 index 1 mmio: [0xda000000-0xda1fffff] [ 3.554060] bus: 01 index 2 mmio: [0xda500000-0xda5fffff] [ 3.586456] bus: 01 index 3 mmio: [0x0-0x0] [ 3.611569] bus: 02 index 0 io port: [0x2000-0x2fff] [ 3.641367] bus: 02 index 1 mmio: [0xda000000-0xda0fffff] [ 3.673762] bus: 02 index 2 mmio: [0xda500000-0xda5fffff] [ 3.706157] bus: 02 index 3 mmio: [0x0-0x0] [ 3.731273] bus: 03 index 0 mmio: [0x0-0x0] [ 3.756389] bus: 03 index 1 mmio: [0x0-0x0] [ 3.781503] bus: 03 index 2 mmio: [0x0-0x0] [ 3.806618] bus: 03 index 3 mmio: [0x0-0x0] [ 3.831735] bus: 04 index 0 mmio: [0x0-0x0] [ 3.856851] bus: 04 index 1 mmio: [0x0-0x0] [ 3.881966] bus: 04 index 2 mmio: [0x0-0x0] [ 3.907081] bus: 04 index 3 mmio: [0x0-0x0] [ 3.932197] bus: 05 index 0 mmio: [0x0-0x0] [ 3.957313] bus: 05 index 1 mmio: [0x0-0x0] [ 3.982429] bus: 05 index 2 mmio: [0x0-0x0] [ 4.007545] bus: 05 index 3 mmio: [0x0-0x0] [ 4.032660] bus: 06 index 0 io port: [0x2000-0x2fff] [ 4.062455] bus: 06 index 1 mmio: [0xda000000-0xda0fffff] [ 4.094850] bus: 06 index 2 mmio: [0xda500000-0xda5fffff] [ 4.127245] bus: 06 index 3 mmio: [0x0-0x0] [ 4.152360] bus: 07 index 0 mmio: [0x0-0x0] [ 4.177477] bus: 07 index 1 mmio: [0x0-0x0] [ 4.202592] bus: 07 index 2 mmio: [0x0-0x0] [ 4.227708] bus: 07 index 3 mmio: [0x0-0x0] [ 4.252825] bus: 08 index 0 io port: [0x3000-0x3fff] [ 4.282619] bus: 08 index 1 mmio: [0xda200000-0xda2fffff] [ 4.315016] bus: 08 index 2 mmio: [0xda600000-0xda6fffff] [ 4.347411] bus: 08 index 3 mmio: [0x0-0x0] [ 4.372525] bus: 09 index 0 io port: [0x4000-0x4fff] [ 4.402320] bus: 09 index 1 mmio: [0xda300000-0xda3fffff] [ 4.434716] bus: 09 index 2 mmio: [0xd8000000-0xd9ffffff] [ 4.467112] bus: 09 index 3 mmio: [0x0-0x0] [ 4.492227] bus: 0a index 0 mmio: [0x0-0x0] [ 4.517344] bus: 0a index 1 mmio: [0x0-0x0] [ 4.542458] bus: 0a index 2 mmio: [0x0-0x0] [ 4.567575] bus: 0a index 3 mmio: [0x0-0x0] [ 4.592693] bus: 0b index 0 io port: [0x5000-0x5fff] [ 4.595232] Switched to high resolution mode on CPU 3 [ 4.595253] Switched to high resolution mode on CPU 2 [ 4.595280] Switched to high resolution mode on CPU 1 [ 4.622488] Switched to high resolution mode on CPU 0 [ 4.622502] bus: 0b index 1 mmio: [0xda400000-0xda4fffff] [ 4.654881] bus: 0b index 2 mmio: [0xd0000000-0xd7ffffff] [ 4.687278] bus: 0b index 3 io port: [0x00-0xffff] [ 4.716032] bus: 0b index 4 mmio: [0x000000-0xffffffffffffffff] [ 4.751581] NET: Registered protocol family 2 [ 4.816061] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.860210] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 4.906361] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.946951] TCP: Hash tables configured (established 262144 bind 65536) [ 4.986637] TCP reno registered [ 5.020090] NET: Registered protocol family 1 [ 5.046333] checking if image is initramfs... it is [ 5.430340] Freeing initrd memory: 4694k freed [ 5.457966] Simple Boot Flag at 0x38 set to 0x1 [ 5.486332] audit: initializing netlink socket (disabled) [ 5.518710] type=2000 audit(1235968924.518:1): initialized [ 5.552076] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.590379] VFS: Disk quotas dquot_6.5.1 [ 5.613925] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.659039] msgmni has been set to 7906 [ 5.682206] alg: No test for stdrng (krng) [ 5.706783] io scheduler noop registered [ 5.730329] io scheduler anticipatory registered [ 5.758043] io scheduler deadline registered [ 5.783693] io scheduler cfq registered (default) [ 5.812017] pci 0000:0b:01.0: Boot video device [ 5.814272] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 5.814297] pcieport-driver 0000:00:02.0: found MSI capability [ 5.849319] pcieport-driver 0000:00:02.0: irq 1279 for MSI/MSI-X [ 5.849327] pci_express 0000:00:02.0:pcie00: allocate port service [ 5.849370] pci_express 0000:00:02.0:pcie01: allocate port service [ 5.849443] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 5.849468] pcieport-driver 0000:00:04.0: found MSI capability [ 5.884467] pcieport-driver 0000:00:04.0: irq 1278 for MSI/MSI-X [ 5.884474] pci_express 0000:00:04.0:pcie00: allocate port service [ 5.884517] pci_express 0000:00:04.0:pcie01: allocate port service [ 5.884591] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 5.884616] pcieport-driver 0000:00:06.0: found MSI capability [ 5.919618] pcieport-driver 0000:00:06.0: irq 1277 for MSI/MSI-X [ 5.919625] pci_express 0000:00:06.0:pcie00: allocate port service [ 5.919666] pci_express 0000:00:06.0:pcie01: allocate port service [ 5.919738] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 5.919767] pcieport-driver 0000:00:1c.0: found MSI capability [ 5.954778] pcieport-driver 0000:00:1c.0: irq 1276 for MSI/MSI-X [ 5.954788] pci_express 0000:00:1c.0:pcie00: allocate port service [ 5.954828] pci_express 0000:00:1c.0:pcie02: allocate port service [ 5.954867] pci_express 0000:00:1c.0:pcie03: allocate port service [ 5.954942] pcieport-driver 0000:01:00.0: setting latency timer to 64 [ 5.954969] pci_express 0000:01:00.0:pcie11: allocate port service [ 5.955053] pcieport-driver 0000:02:00.0: setting latency timer to 64 [ 5.955078] pcieport-driver 0000:02:00.0: found MSI capability [ 5.990084] pcieport-driver 0000:02:00.0: irq 1275 for MSI/MSI-X [ 5.990093] pci_express 0000:02:00.0:pcie21: allocate port service [ 5.990175] pcieport-driver 0000:02:02.0: setting latency timer to 64 [ 5.990200] pcieport-driver 0000:02:02.0: found MSI capability [ 6.025182] pcieport-driver 0000:02:02.0: irq 1274 for MSI/MSI-X [ 6.025191] pci_express 0000:02:02.0:pcie21: allocate port service [ 6.026360] aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support [ 6.027390] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support [ 6.028420] aer 0000:00:06.0:pcie01: AER service couldn't init device: no _OSC support [ 6.031248] Linux agpgart interface v0.103 [ 6.055843] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 6.092514] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.128650] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 6.165075] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.198649] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 6.233569] brd: module loaded [ 6.252051] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 6.299684] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.329465] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.359874] mice: PS/2 mouse device common for all mice [ 6.391311] rtc_cmos 00:04: RTC can wake from S4 [ 6.419059] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 6.455633] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.496363] cpuidle: using governor ladder [ 6.520924] cpuidle: using governor menu [ 6.544735] TCP cubic registered [ 6.564140] NET: Registered protocol family 17 [ 6.590939] registered taskstats version 1 [ 6.615655] rtc_cmos 00:04: setting system clock to 2009-03-02 04:42:14 UTC (1235968934) [ 6.664225] Freeing unused kernel memory: 296k freed [ 6.736879] SCSI subsystem initialized [ 6.769497] libata version 3.00 loaded. [ 6.771894] ahci 0000:00:1f.2: version 3.0 [ 6.771910] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.812724] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 6.861778] ahci 0000:00:1f.2: flags: 64bit pm led pmp slum part [ 6.898337] ahci 0000:00:1f.2: setting latency timer to 64 [ 6.898601] scsi0 : ahci [ 6.913923] scsi1 : ahci [ 6.929186] scsi2 : ahci [ 6.944476] scsi3 : ahci [ 6.959765] scsi4 : ahci [ 6.975052] scsi5 : ahci [ 6.990326] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19 [ 7.039354] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19 [ 7.088390] ata3: SATA max UDMA/133 abar m1024@0xda700800 port 0xda700a00 irq 19 [ 7.132744] ata4: SATA max UDMA/133 abar m1024@0xda700800 port 0xda700a80 irq 19 [ 7.177099] ata5: SATA max UDMA/133 abar m1024@0xda700800 port 0xda700b00 irq 19 [ 7.221454] ata6: SATA max UDMA/133 abar m1024@0xda700800 port 0xda700b80 irq 19 [ 8.152010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.211106] ata1.00: ATA-8: WDC WD5000ABPS-01ZZB0, 02.01B01, max UDMA/133 [ 8.251824] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 8.292357] ata1.00: configured for UDMA/133 [ 9.220009] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.272169] ata2.00: ATA-8: WDC WD5000ABPS-01ZZB0, 02.01B01, max UDMA/133 [ 9.312863] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 9.353448] ata2.00: configured for UDMA/133 [ 9.712010] ata3: SATA link down (SStatus 0 SControl 300) [ 10.080010] ata4: SATA link down (SStatus 0 SControl 300) [ 10.448010] ata5: SATA link down (SStatus 0 SControl 300) [ 10.816011] ata6: SATA link down (SStatus 0 SControl 300) [ 10.864092] scsi 0:0:0:0: Direct-Access ATA WDC WD5000ABPS-0 02.0 PQ: 0 ANSI: 5 [ 10.912765] scsi 1:0:0:0: Direct-Access ATA WDC WD5000ABPS-0 02.0 PQ: 0 ANSI: 5 [ 10.965433] Driver 'sd' needs updating - please use bus_type methods [ 11.003681] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 11.049596] sd 0:0:0:0: [sda] Write Protect is off [ 11.078336] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.078358] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.132673] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 11.178600] sd 0:0:0:0: [sda] Write Protect is off [ 11.207345] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.207367] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.261635] sda: sda1 sda2 sda3 [ 11.298564] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.326342] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 11.372245] sd 1:0:0:0: [sdb] Write Protect is off [ 11.400991] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.401012] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.455312] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 11.501258] sd 1:0:0:0: [sdb] Write Protect is off [ 11.530001] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.530022] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.584287] sdb: sdb1 sdb2 sdb3 [ 11.616360] sd 1:0:0:0: [sdb] Attached SCSI disk [ 11.654659] md: raid1 personality registered for level 1 [ 11.704105] ACPI: SSDT CFF64189, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228) [ 11.749705] Monitor-Mwait will be used to enter C-1 state [ 11.749708] Monitor-Mwait will be used to enter C-2 state [ 11.749710] Monitor-Mwait will be used to enter C-3 state [ 11.749876] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 11.783750] processor ACPI_CPU:00: registered as cooling_device0 [ 11.819793] ACPI: Processor [CPU0] (supports 8 throttling states) [ 11.856946] ACPI: SSDT CFF646A1, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228) [ 11.902509] Marking TSC unstable due to TSC halts in idle [ 11.935107] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 11.969041] processor ACPI_CPU:01: registered as cooling_device1 [ 12.005071] ACPI: Processor [CPU1] (supports 8 throttling states) [ 12.042340] ACPI: SSDT CFF64726, 0085 (r1 PmRef Cpu2Cst 3000 INTL 20050228) [ 12.088280] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) [ 12.122303] processor ACPI_CPU:02: registered as cooling_device2 [ 12.158312] ACPI: Processor [CPU2] (supports 8 throttling states) [ 12.195669] ACPI: SSDT CFF647AB, 0085 (r1 PmRef Cpu3Cst 3000 INTL 20050228) [ 12.241621] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) [ 12.275632] processor ACPI_CPU:03: registered as cooling_device3 [ 12.311658] ACPI: Processor [CPU3] (supports 8 throttling states) [ 12.475596] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 12.512174] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 12.547217] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 12.563462] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 12.563499] 3w-9xxx 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 12.563504] 3w-9xxx 0000:09:00.0: setting latency timer to 64 [ 12.576842] uhci_hcd: USB Universal Host Controller Interface driver [ 12.713216] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 12.713221] e1000e 0000:06:00.0: setting latency timer to 64 [ 12.730999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.731001] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 12.791408] Floppy drive(s): fd0 is 1.44M [ 12.870374] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 12.870379] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 12.870384] e1000e 0000:06:00.0: irq 1273 for MSI/MSI-X [ 12.901870] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 12.905872] FDC 0 is a post-1991 82077 [ 12.968773] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800 [ 13.003352] usb usb1: configuration #1 chosen from 1 choice [ 13.036831] hub 1-0:1.0: USB hub found [ 13.059322] hub 1-0:1.0: 2 ports detected [ 13.083640] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.091474] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:30:48:7f:5f:9e [ 13.091476] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 13.091552] 0000:06:00.0: eth0: MAC: 4, PHY: 5, PBA No: 2050ff-0ff [ 13.091576] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 13.091582] e1000e 0000:06:00.1: setting latency timer to 64 [ 13.287771] e1000e 0000:06:00.1: irq 1272 for MSI/MSI-X [ 13.288167] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 13.288170] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 13.319623] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 13.321046] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:. [ 13.415889] ehci_hcd 0000:00:1d.7: debug port 1 [ 13.443096] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 13.443101] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xda700400 [ 13.477056] scsi6 : 3ware 9000 Storage Controller [ 13.505285] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 13.505310] 3w-9xxx: scsi6: Found a 3ware 9000 Storage Controller at 0xda300000, IRQ: 18. [ 13.521807] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:30:48:7f:5f:9f [ 13.521809] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 13.521885] 0000:06:00.1: eth1: MAC: 4, PHY: 5, PBA No: 2050ff-0ff [ 13.521915] e1000e 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.521922] e1000e 0000:08:00.0: setting latency timer to 64 [ 13.750122] e1000e 0000:08:00.0: irq 1271 for MSI/MSI-X [ 13.750137] usb usb2: configuration #1 chosen from 1 choice [ 13.783598] hub 2-0:1.0: USB hub found [ 13.806093] hub 2-0:1.0: 6 ports detected [ 13.830312] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 13.873129] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 13.873132] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 13.904528] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 13.948910] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 13.983423] usb usb3: configuration #1 chosen from 1 choice [ 14.016873] hub 3-0:1.0: USB hub found [ 14.019684] 0000:08:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:15:17:68:58:0c [ 14.019686] 0000:08:00.0: eth2: Intel(R) PRO/1000 Network Connection [ 14.019765] 0000:08:00.0: eth2: MAC: 1, PHY: 4, PBA No: d50861-003 [ 14.158942] 3w-9xxx: scsi6: Firmware FE9X 4.06.00.004, BIOS BE9X 4.05.00.015, Ports: 8. [ 14.158945] hub 3-0:1.0: 2 ports detected [ 14.159051] ata_piix 0000:00:1f.1: version 2.12 [ 14.159058] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.159096] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 14.159173] scsi7 : ata_piix [ 14.159223] scsi8 : ata_piix [ 14.159721] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 14.159724] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 14.399839] scsi 6:0:0:0: Direct-Access AMCC 9650SE-8LP DISK 4.06 PQ: 0 ANSI: 5 [ 14.448831] ata7.01: ATAPI: MATSHITADVD-ROM SR-8178, PZ16, max UDMA/66 [ 14.488010] ata7.01: limited to UDMA/33 due to 40-wire cable [ 14.528071] sd 6:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [ 14.572024] sd 6:0:0:0: [sdc] 5859311616 512-byte hardware sectors: (2.99 TB/2.72 TiB) [ 14.572463] ata7.01: configured for UDMA/33 [ 14.573037] usb 2-6: new high speed USB device using ehci_hcd and address 2 [ 14.686447] ata8: port disabled. ignoring. [ 14.686454] scsi: waiting for bus probes to complete ... [ 14.686603] sd 6:0:0:0: [sdc] Write Protect is off [ 14.686606] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 14.686950] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA [ 14.801990] sd 6:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [ 14.845907] sd 6:0:0:0: [sdc] 5859311616 512-byte hardware sectors: (2.99 TB/2.72 TiB) [ 14.893588] sd 6:0:0:0: [sdc] Write Protect is off [ 14.922325] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 14.922666] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA [ 14.977456] sdc:<6>usb 2-6: configuration #1 chosen from 1 choice [ 15.024051] usbcore: registered new interface driver hiddev [ 15.039793] unknown partition table [ 15.079000] sd 6:0:0:0: [sdc] Attached SCSI disk [ 15.107509] input: Peppercon AG Multidevice as /class/input/input0 [ 15.108264] scsi 7:0:1:0: CD-ROM MATSHITA DVD-ROM SR-8178 PZ16 PQ: 0 ANSI: 5 [ 15.117003] Driver 'sr' needs updating - please use bus_type methods [ 15.231229] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 15.274075] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 15.274080] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 15.305577] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 15.349972] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 15.384485] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 15.384557] usb usb4: configuration #1 chosen from 1 choice [ 15.384582] hub 4-0:1.0: USB hub found [ 15.384587] hub 4-0:1.0: 2 ports detected [ 15.501601] Uniform CD-ROM driver Revision: 3.20 [ 15.504052] generic-usb 0003:14DD:0002.0001: input,hidraw0: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1d.7-6/input0 [ 15.507963] input: Peppercon AG Multidevice as /class/input/input1 [ 15.639463] sr 7:0:1:0: Attached scsi CD-ROM sr0 [ 15.645137] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.677055] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.708990] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 15.740925] sr 7:0:1:0: Attached scsi generic sg3 type 5 [ 15.745090] generic-usb 0003:14DD:0002.0002: input,hidraw1: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1d.7-6/input1 [ 15.745109] usbcore: registered new interface driver usbhid [ 15.745111] usbhid: v2.6:USB HID core driver [ 16.269072] md: md0 stopped. [ 16.319941] md: bind<sdb1> [ 16.336353] md: bind<sda1> [ 16.356362] raid1: raid set md0 active with 2 out of 2 mirrors [ 16.391683] md: md1 stopped. [ 16.409089] md0: unknown partition table [ 16.487526] md: bind<sdb2> [ 16.503940] md: bind<sda2> [ 16.523892] raid1: raid set md1 active with 2 out of 2 mirrors [ 16.559146] md: md2 stopped. [ 16.576527] md1: unknown partition table [ 16.624185] md: bind<sdb3> [ 16.640598] md: bind<sda3> [ 16.660542] raid1: raid set md2 active with 2 out of 2 mirrors [ 16.696091] md2: unknown partition table [ 16.812846] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 16.870883] SGI XFS Quota Management subsystem [ 16.947512] XFS mounting filesystem md0 [ 17.088857] Ending clean XFS mount for filesystem: md0 [ 18.391375] udevd version 125 started [ 18.737694] input: Power Button (FF) as /class/input/input2 [ 18.800063] ACPI: Power Button (FF) [PWRF] [ 18.827019] input: Power Button (CM) as /class/input/input3 [ 18.862840] EDAC MC: Ver: 2.1.0 Mar 1 2009 [ 18.905571] ACPI: Power Button (CM) [PWRB] [ 18.931968] parport_pc 00:0c: reported by Plug and Play ACPI [ 18.966083] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 19.022915] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 19.068882] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 19.137181] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 19.170801] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 19.217404] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 19.292273] input: PC Speaker as /class/input/input4 [ 19.322535] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 19.390200] intel_rng: FWH not detected [ 20.517146] Adding 7911928k swap on /dev/md1. Priority:-1 extents:1 across:7911928k [ 21.514433] dca service started, version 1.4 [ 21.541594] ioatdma 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.583930] ioatdma 0000:00:08.0: setting latency timer to 64 [ 21.583938] ioatdma 0000:00:08.0: Intel(R) I/OAT DMA Engine found, 4 channels, device version 0x12, driver version 3.30 [ 21.648594] ioatdma 0000:00:08.0: irq 1270 for MSI/MSI-X [ 22.350341] XFS mounting filesystem md2 [ 22.622909] Ending clean XFS mount for filesystem: md2 [ 22.732875] XFS mounting filesystem sdc [ 22.933466] Ending clean XFS mount for filesystem: sdc [ 23.760273] e1000e 0000:06:00.0: irq 1273 for MSI/MSI-X [ 23.816070] e1000e 0000:06:00.0: irq 1273 for MSI/MSI-X [ 24.433147] NET: Registered protocol family 10 [ 24.460240] lo: Disabled Privacy Extensions [ 24.485865] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.440892] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 26.487856] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.817296] e1000e 0000:06:00.1: irq 1272 for MSI/MSI-X [ 26.872060] e1000e 0000:06:00.1: irq 1272 for MSI/MSI-X [ 26.872950] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 26.979396] 0000:06:00.1: eth1: changing MTU from 1500 to 9216 [ 27.176239] e1000e 0000:08:00.0: irq 1271 for MSI/MSI-X [ 27.232083] e1000e 0000:08:00.0: irq 1271 for MSI/MSI-X [ 27.233397] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 27.434703] 0000:08:00.0: eth2: changing MTU from 1500 to 9216 [ 27.554395] Bridge firewalling registered [ 27.678890] device eth1 entered promiscuous mode [ 27.711076] device eth2 entered promiscuous mode [ 29.934403] 0000:06:00.1: eth1: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 29.981970] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 30.016656] br0: topology change detected, propagating [ 30.047465] br0: port 1(eth1) entering forwarding state [ 30.048435] 0000:08:00.0: eth2: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 30.126331] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 30.161293] br0: topology change detected, propagating [ 30.192133] br0: port 2(eth2) entering forwarding state [ 30.513592] RPC: Registered udp transport module. [ 30.541821] RPC: Registered tcp transport module. [ 30.725851] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 31.161151] 0000:08:00.0: eth2: Link is Down [ 31.197525] br0: port 2(eth2) entering disabled state [ 33.408970] 0000:08:00.0: eth2: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 33.456561] br0: topology change detected, propagating [ 33.487367] br0: port 2(eth2) entering forwarding state [ 35.677744] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 35.724737] NFSD: starting 90-second grace period [ 36.596016] eth0: no IPv6 routers present [ 37.864017] br0: no IPv6 routers present [ 40.568017] eth2: no IPv6 routers present [ 40.725515] eth1: no IPv6 routers present [ 43.159304] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 150.190506] 0000:06:00.1: eth1: Link is Down [ 150.225539] br0: port 1(eth1) entering disabled state [ 152.032896] 0000:06:00.1: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 152.079334] 0000:06:00.1: eth1: 10/100 speed: disabling TSO [ 152.113303] br0: topology change detected, propagating [ 152.144131] br0: port 1(eth1) entering forwarding state [ 161.100145] 0000:08:00.0: eth2: Link is Down [ 161.136530] br0: port 2(eth2) entering disabled state [ 162.668961] 0000:08:00.0: eth2: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 162.715401] 0000:08:00.0: eth2: 10/100 speed: disabling TSO [ 162.749375] br0: topology change detected, propagating [ 162.780189] br0: port 2(eth2) entering forwarding state [ 448.408142] 0000:08:00.0: eth2: Link is Down [ 448.445536] br0: port 2(eth2) entering disabled state [ 455.536963] 0000:08:00.0: eth2: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 455.583431] 0000:08:00.0: eth2: 10/100 speed: disabling TSO [ 455.617447] br0: topology change detected, propagating [ 455.648281] br0: port 2(eth2) entering forwarding state [ 459.548141] 0000:08:00.0: eth2: Link is Down [ 459.585991] br0: port 2(eth2) entering disabled state [ 461.520963] 0000:08:00.0: eth2: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 461.567404] 0000:08:00.0: eth2: 10/100 speed: disabling TSO [ 461.601391] br0: topology change detected, propagating [ 461.632251] br0: port 2(eth2) entering forwarding state [ 481.732144] 0000:08:00.0: eth2: Link is Down [ 481.770036] br0: port 2(eth2) entering disabled state [ 484.208966] 0000:08:00.0: eth2: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 484.256565] br0: topology change detected, propagating [ 484.287424] br0: port 2(eth2) entering forwarding state [ 485.140153] 0000:08:00.0: eth2: Link is Down [ 485.266015] br0: port 2(eth2) entering disabled state [ 487.445460] 0000:08:00.0: eth2: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 487.493067] br0: topology change detected, propagating [ 487.523922] br0: port 2(eth2) entering forwarding state [ 535.014501] 0000:06:00.1: eth1: Link is Down [ 535.049032] br0: port 1(eth1) entering disabled state [ 552.556903] 0000:06:00.1: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 552.603391] 0000:06:00.1: eth1: 10/100 speed: disabling TSO [ 552.637388] br0: topology change detected, propagating [ 552.668242] br0: port 1(eth1) entering forwarding state [ 556.582498] 0000:06:00.1: eth1: Link is Down [ 556.620534] br0: port 1(eth1) entering disabled state [ 558.415535] 0000:06:00.1: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 558.461984] 0000:06:00.1: eth1: 10/100 speed: disabling TSO [ 558.495932] br0: topology change detected, propagating [ 558.526781] br0: port 1(eth1) entering forwarding state [ 571.150503] 0000:06:00.1: eth1: Link is Down [ 571.185002] br0: port 1(eth1) entering disabled state [ 573.685862] 0000:06:00.1: eth1: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 573.733373] br0: topology change detected, propagating [ 573.764186] br0: port 1(eth1) entering forwarding state [ 578.800141] 0000:08:00.0: eth2: Link is Down [ 578.836501] br0: port 2(eth2) entering disabled state [ 580.418466] 0000:08:00.0: eth2: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 580.464959] 0000:08:00.0: eth2: 10/100 speed: disabling TSO [ 580.499117] br0: topology change detected, propagating [ 580.529961] br0: port 2(eth2) entering forwarding state [ 602.768143] 0000:08:00.0: eth2: Link is Down [ 602.804538] br0: port 2(eth2) entering disabled state [ 608.132964] 0000:08:00.0: eth2: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 608.180510] br0: topology change detected, propagating [ 608.211333] br0: port 2(eth2) entering forwarding state [ 629.952143] 0000:08:00.0: eth2: Link is Down [ 629.988538] br0: port 2(eth2) entering disabled state [ 632.612965] 0000:08:00.0: eth2: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 632.660526] br0: topology change detected, propagating [ 632.691361] br0: port 2(eth2) entering forwarding state [ 636.284644] 0000:08:00.0: eth2: Link is Down [ 636.329532] br0: port 2(eth2) entering disabled state [ 638.532961] 0000:08:00.0: eth2: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 638.580513] br0: topology change detected, propagating [ 638.611368] br0: port 2(eth2) entering forwarding state [ 639.624141] 0000:08:00.0: eth2: Link is Down [ 639.661983] br0: port 2(eth2) entering disabled state [ 641.872960] 0000:08:00.0: eth2: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 641.920523] br0: topology change detected, propagating [ 641.951351] br0: port 2(eth2) entering forwarding state [ 675.830501] 0000:06:00.1: eth1: Link is Down [ 675.865040] br0: port 1(eth1) entering disabled state [ 677.660901] 0000:06:00.1: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 677.707428] 0000:06:00.1: eth1: 10/100 speed: disabling TSO [ 677.741517] br0: topology change detected, propagating [ 677.772381] br0: port 1(eth1) entering forwarding state [ 693.159570] 0000:06:00.1: eth1: Link is Down [ 693.194025] br0: port 1(eth1) entering disabled state [ 695.752902] 0000:06:00.1: eth1: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 695.800470] br0: topology change detected, propagating [ 695.831315] br0: port 1(eth1) entering forwarding state [ 722.715466] 0000:06:00.1: eth1: Link is Down [ 722.753531] br0: port 1(eth1) entering disabled state [ 725.345937] 0000:06:00.1: eth1: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 725.393593] br0: topology change detected, propagating [ 725.424467] br0: port 1(eth1) entering forwarding state [ 730.294504] 0000:06:00.1: eth1: Link is Down [ 730.330016] br0: port 1(eth1) entering disabled state [ 732.753407] 0000:06:00.1: eth1: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 732.801054] br0: topology change detected, propagating [ 732.831900] br0: port 1(eth1) entering forwarding state [12173.668774] nfsd: inode locked twice during operation. [98572.661534] nfsd: inode locked twice during operation. [98583.632433] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0029): Verify started:unit=0. [100870.581899] 3w-9xxx: scsi6: AEN: INFO (0x04:0x002B): Verify completed:unit=0. [100924.718169] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0029): Verify started:unit=1. [100924.761018] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0029): Verify started:unit=0. [112560.733724] 3w-9xxx: scsi6: AEN: INFO (0x04:0x002B): Verify completed:unit=1. [152853.702517] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0055): Battery charging started:. [152877.373187] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0056): Battery charging completed:. [181215.731227] 3w-9xxx: scsi6: AEN: INFO (0x04:0x002B): Verify completed:unit=0. [181266.965501] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0029): Verify started:unit=1. [181267.008169] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0029): Verify started:unit=0. [184712.603178] 3w-9xxx: scsi6: AEN: INFO (0x04:0x003D): Verify paused:unit=1. [184974.361402] nfsd: inode locked twice during operation. [271373.460483] nfsd: inode locked twice during operation. [327580.885533] device br0 entered promiscuous mode [327616.437030] device br0 left promiscuous mode [327618.712028] device br0 entered promiscuous mode [328486.593521] device br0 left promiscuous mode [357773.524783] nfsd: inode locked twice during operation. [444178.745207] nfsd: inode locked twice during operation. [530573.066807] nfsd: inode locked twice during operation. [613374.214454] nfsd: inode locked twice during operation. [655851.637116] 3w-9xxx: scsi6: AEN: INFO (0x04:0x001A): Drive inserted:port=4. [699772.931696] nfsd: inode locked twice during operation. [703400.827266] 3w-9xxx: scsi6: AEN: INFO (0x04:0x0029): Verify started:unit=0. [748031.230879] nfsd: last server has exited, flushing export cache [748031.952208] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [748272.256202] SysRq : Show Blocked State [748272.260073] task PC stack pid father [748272.260073] rpc.nfsd D 0000000000001000 0 26913 26906 [748272.260073] ffff88010efa7798 0000000000000086 ffff88012fb34300 ffff88005d4af380 [748272.260073] ffffffff805e6e40 ffff88005d4af380 ffff88001b077c00 ffff88012f99e050 [748272.260073] ffff88012d670cf0 ffff88012f99e2c0 0000000100000000 ffff88012f99e2c0 [748272.260073] Call Trace: [748272.260073] [<ffffffff804000ab>] udp_push_pending_frames+0x2bf/0x320 [748272.260073] [<ffffffff8042e309>] schedule_timeout+0x1e/0xc9 [748272.260073] [<ffffffff8042ec71>] __down+0x5e/0x8b [748272.260073] [<ffffffff802471fb>] down+0x27/0x36 [748272.260073] [<ffffffffa019af10>] _xfs_buf_find+0x163/0x1f6 [xfs] [748272.260073] [<ffffffffa019affd>] xfs_buf_get_flags+0x5a/0x148 [xfs] [748272.260073] [<ffffffffa019b0fd>] xfs_buf_read_flags+0x12/0x81 [xfs] [748272.260073] [<ffffffffa0190ef1>] xfs_trans_read_buf+0x47/0x2af [xfs] [748272.260073] [<ffffffffa016be99>] xfs_da_do_buf+0x410/0x622 [xfs] [748272.260073] [<ffffffff80228a4b>] dequeue_entity+0x18/0x11f [748272.260073] [<ffffffffa016c115>] xfs_da_read_buf+0x24/0x29 [xfs] [748272.260073] [<ffffffffa016f784>] xfs_dir2_block_lookup_int+0x47/0x1b2 [xfs] [748272.260073] [<ffffffffa016f784>] xfs_dir2_block_lookup_int+0x47/0x1b2 [xfs] [748272.260073] [<ffffffffa016fd2b>] xfs_dir2_block_lookup+0x18/0xb1 [xfs] [748272.260073] [<ffffffffa016ea5d>] xfs_dir_lookup+0xdd/0x14f [xfs] [748272.260073] [<ffffffffa019539a>] xfs_lookup+0x48/0xa5 [xfs] [748272.260073] [<ffffffff80388b8b>] wait_for_xmitr+0x40/0x87 [748272.260073] [<ffffffffa019d9ef>] xfs_vn_lookup+0x3c/0x78 [xfs] [748272.260073] [<ffffffff8029e3d9>] __lookup_hash+0xfa/0x11e [748272.260073] [<ffffffff8029e523>] lookup_one_len+0x6c/0x7f [748272.260073] [<ffffffffa034e2d8>] nfsd4_build_dentrylist+0x2f/0x7a [nfsd] [748272.260073] [<ffffffffa016fb00>] xfs_dir2_block_getdents+0x15d/0x1bc [xfs] [748272.260073] [<ffffffffa034e2a9>] nfsd4_build_dentrylist+0x0/0x7a [nfsd] [748272.260073] [<ffffffffa034e2a9>] nfsd4_build_dentrylist+0x0/0x7a [nfsd] [748272.260073] [<ffffffffa016e834>] xfs_readdir+0x93/0xb8 [xfs] [748272.260073] [<ffffffffa034e2a9>] nfsd4_build_dentrylist+0x0/0x7a [nfsd] [748272.260073] [<ffffffffa019b4c9>] xfs_file_readdir+0x31/0x40 [xfs] [748272.260073] [<ffffffff802a31f7>] vfs_readdir+0x75/0xa7 [748272.260073] [<ffffffffa034e323>] load_recdir+0x0/0x2a [nfsd] [748272.260073] [<ffffffffa034e197>] nfsd4_list_rec_dir+0xde/0x1b9 [nfsd] [748272.260073] [<ffffffffa034e286>] nfsd4_recdir_load+0x14/0x37 [nfsd] [748272.260073] [<ffffffffa034a09d>] nfs4_state_start+0x2b/0xf6 [nfsd] [748272.260073] [<ffffffffa0332592>] nfsd_svc+0x5a/0xfd [nfsd] [748272.260073] [<ffffffffa033321b>] write_threads+0x0/0xad [nfsd] [748272.260073] [<ffffffffa0333280>] write_threads+0x65/0xad [nfsd] [748272.260073] [<ffffffff802757b3>] get_zeroed_page+0x1a/0x7d [748272.260073] [<ffffffff802ae3c1>] simple_transaction_get+0x8a/0xa4 [748272.260073] [<ffffffffa033321b>] write_threads+0x0/0xad [nfsd] [748272.260073] [<ffffffffa0332985>] nfsctl_transaction_write+0x43/0x72 [nfsd] [748272.260073] [<ffffffff8029777c>] vfs_write+0xad/0x156 [748272.260073] [<ffffffff802978e1>] sys_write+0x45/0x6e [748272.260073] [<ffffffff8020bd7b>] system_call_fastpath+0x16/0x1b
