RE: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: devicetree-owner@xxxxxxxxxxxxxxx <devicetree-
> owner@xxxxxxxxxxxxxxx> On Behalf Of Ashish Kumar
> Sent: Wednesday, August 21, 2019 7:49 PM
> To: Mark Brown <broonie@xxxxxxxxxx>; shawnguo@xxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-spi@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> linux-next@xxxxxxxxxxxxxxx; Kuldeep Singh <kuldeep.singh@xxxxxxx>
> Subject: RE: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a
> compatibility string to bindings
> 
> Caution: EXT Email
> 
> > -----Original Message-----
> > From: Mark Brown <broonie@xxxxxxxxxx>
> > Sent: Wednesday, August 21, 2019 4:37 PM
> > To: Ashish Kumar <ashish.kumar@xxxxxxx>
> > Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-spi@xxxxxxxxxxxxxxx;
> > devicetree@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx;
> > linux-next@xxxxxxxxxxxxxxx; Kuldeep Singh <kuldeep.singh@xxxxxxx>
> > Subject: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add
> > ls2080a compatibility string to bindings
> >
> > On Tue, Aug 13, 2019 at 03:53:09PM +0530, Ashish Kumar wrote:
> >
> > > There are 2 version of QSPI-IP, according to which controller
> > > registers sets can be big endian or little endian.There are some
> > > other minor changes like RX fifo depth etc.
> > >
> > > The big endian version uses driver compatible "fsl,ls1021a-qspi" and
> > > little endian version uses driver compatible "fsl,ls2080a-qspi"
> >
> > I'm not seeing the corresponding code changes anywhere?  I'd at least
> > expect to see the compatibles added, and it sounds like some actual
> > code updates are needed.
> Hi Mark,
> 
> Snippet from driver spi-fsl-qspi.c
> static const struct of_device_id fsl_qspi_dt_ids[] = {
>         { .compatible = "fsl,vf610-qspi", .data = &vybrid_data, },
>         { .compatible = "fsl,imx6sx-qspi", .data = &imx6sx_data, },
>         { .compatible = "fsl,imx7d-qspi", .data = &imx7d_data, },
>         { .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, },
>         { .compatible = "fsl,ls1021a-qspi", .data = &ls1021a_data, },
>         { .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, },
>         { /* sentinel */ }
> };
> I had previously sent dts patch based out of Shawn's tree with dependency
> on these dt binding patch. To which Shawn had replied to get dependency
> patch accepted first before sending this dts change.
> Reference conversion can be viewed here [1],[2].
> 
> This compatible can be seen here: file arch/arm64/boot/dts/freescale/fsl-
> ls208xa.dtsi
> 
> Snippet from previous dts patch based on Shawn tree, I will send next
> version on this patch after dt-bindings are updated
> arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-) diff --git
> a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> index d7e78dcd153d..8e5ba513b24f 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> @@ -606,7 +606,7 @@
> 
>                 qspi: spi@20c0000 {
>                         status = "disabled";
> -                       compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
> +                       compatible = "fsl,ls2080a-qspi";
>                         #address-cells = <1>;
>                         #size-cells = <0>;
>                         reg = <0x0 0x20c0000 0x0 0x10000>,
> >
> > Please use subject lines matching the style for the subsystem.  This
> > makes it easier for people to identify relevant patches.
Hi Mark,

After looking at some patch in Documentation/devicetree/bindings/spi/
I think I should update subject line to
dt-bindings: spi: Add ls2080-qspi compatible string for FSL QSPI driver
or 
doc: qspi: Add ls2080-qspi compatible to DT bindings for FSL QSPI driver

Please suggest, if you think these are good or still need change.
Regards
Ashish 

> Could you please guide more, or point to documentation to follow sub-
> system style.
> dt-bindings: spi: spi-fsl-qspi: Add ls2080a-qspi compatibility string to bindings
> Is this a better now? if yes, I will send next version
> 
> [1]:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww
> .spinics.net%2Flists%2Farm-
> kernel%2Fmsg727403.html&amp;data=02%7C01%7Cashish.kumar%40nxp.co
> m%7C5922d2067b004c8f8f2c08d72642800c%7C686ea1d3bc2b4c6fa92cd99c5c
> 301635%7C0%7C0%7C637019939369034444&amp;sdata=HsumTqK0SiaBjzmbK
> 9r5dfpNtWHiZ%2FcB9e%2Bwy7SW160%3D&amp;reserved=0
> [2]:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatch
> work.kernel.org%2Fpatch%2F10192103%2F&amp;data=02%7C01%7Cashish.k
> umar%40nxp.com%7C5922d2067b004c8f8f2c08d72642800c%7C686ea1d3bc2b
> 4c6fa92cd99c5c301635%7C0%7C0%7C637019939369034444&amp;sdata=2xRb
> YdJHTibb1BM0iNSJ00P69s2RKj9SLNFNUsneT8I%3D&amp;reserved=0
> 
> Regards
> Ashish




[Index of Archives]     [Linux Kernel]     [Linux USB Development]     [Yosemite News]     [Linux SCSI]

  Powered by Linux