[PATCH] regulator: rk808: make better use of the gpiod API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The gpiod functions include variants for managed gpiod resources. Use it
to simplify the remove function.

As the driver handles a device node without a specification of dvs gpios
just fine, additionally use the variant of gpiod_get exactly for this
use case. This makes error checking more strict.

As a third benefit this patch makes the driver use the flags parameter
of gpiod_get* which will not be optional any more after 4.2 and so
prevents a build failure when the respective gpiod commit is merged.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
Hello,

this is the more complete fix of the issue that Stephen found while creating
next-20150721 (see commit f51ec04cf8be9f7ef795f1f39ada17c19f725650).

Best regards
Uwe

 drivers/regulator/rk808-regulator.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index ca913fd15598..3738e49beb75 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -94,7 +94,7 @@ static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
 	unsigned int val;
 	int ret;
 
-	if (IS_ERR(gpio) || gpiod_get_value(gpio) == 0)
+	if (!gpio || gpiod_get_value(gpio) == 0)
 		return regulator_get_voltage_sel_regmap(rdev);
 
 	ret = regmap_read(rdev->regmap,
@@ -168,7 +168,7 @@ static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
 	unsigned old_sel;
 	int ret, gpio_level;
 
-	if (IS_ERR(gpio))
+	if (!gpio)
 		return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
 
 	gpio_level = gpiod_get_value(gpio);
@@ -205,7 +205,7 @@ static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 
 	/* if there is no dvs1/2 pin, we don't need wait extra time here. */
-	if (IS_ERR(gpio))
+	if (!gpio)
 		return 0;
 
 	return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
@@ -540,14 +540,19 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
 		goto dt_parse_end;
 
 	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
-		pdata->dvs_gpio[i] = gpiod_get_index(client_dev, "dvs", i);
+		pdata->dvs_gpio[i] =
+			devm_gpiod_get_index_optional(client_dev, "dvs", i,
+						      GPIOD_OUT_LOW);
 		if (IS_ERR(pdata->dvs_gpio[i])) {
+			dev_err(dev, "failed to get dvs%d gpio\n", i);
+			return PTR_ERR(pdata->dvs_gpio[i]);
+		}
+
+		if (!pdata->dvs_gpio[i]) {
 			dev_warn(dev, "there is no dvs%d gpio\n", i);
 			continue;
 		}
 
-		gpiod_direction_output(pdata->dvs_gpio[i], 0);
-
 		tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
 		ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
 				gpiod_is_active_low(pdata->dvs_gpio[i]) ?
@@ -561,14 +566,6 @@ dt_parse_end:
 
 static int rk808_regulator_remove(struct platform_device *pdev)
 {
-	struct rk808_regulator_data *pdata = platform_get_drvdata(pdev);
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
-		if (!IS_ERR(pdata->dvs_gpio[i]))
-			gpiod_put(pdata->dvs_gpio[i]);
-	}
-
 	return 0;
 }
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux USB Development]     [Yosemite News]     [Linux SCSI]

  Powered by Linux