On Thu, Mar 1, 2012 at 11:06 PM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote: > Hi Jesse, > > Staring with next-20120227, one of my boot tests is failing like this: Hi Stephen, Thanks a lot for the test report and the bisection. I wish I had a machine to test on so I wouldn't have to bother you about it. Any chance you could point me at the complete before/after dmesg logs? There should be information about the PCI host bridge apertures and offsets in the "after" log. If that's not enough, we might need to collect new before/after logs with something like this (whitespace-mangled): --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -71,7 +71,7 @@ CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple KBUILD_CPPFLAGS += -Iarch/$(ARCH) KBUILD_AFLAGS += -Iarch/$(ARCH) -KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y) +KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y) -DDEBUG CPP = $(CC) -E $(KBUILD_CFLAGS) CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ > Freeing unused kernel memory: 488k freed > modprobe used greatest stack depth: 10624 bytes left > dracut: dracut-004-32.el6 > udev: starting version 147 > udevd (1161): /proc/1161/oom_adj is deprecated, please use /proc/1161/oom_score_adj instead. > setfont used greatest stack depth: 10528 bytes left > dracut: Starting plymouth daemon > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2689 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 9 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2701 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 20 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2713 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 8 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2725 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 8 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2737 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 8 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2749 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 8 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2761 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 7 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2773 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 7 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2785 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 8 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2797 > initcall .wait_scan_init+0x0/0xc4 [scsi_wait_scan] returned 0 after 8 usecs > calling .wait_scan_init+0x0/0xc4 [scsi_wait_scan] @ 2809 > > and eventually our test system decides the machine is dead. This is a > PowerPC 970 based blade system (several other PowerPC based systems to > not fail). A "normal" boot only shows .wait_scan_init being called > once. (I have "initcall_debug=y debug" on the command line). > > I bisected this down to: > > commit 6c5705fec63d83eeb165fe61e34adc92ecc2ce75 > Author: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > Date: Thu Feb 23 20:19:03 2012 -0700 > > powerpc/PCI: get rid of device resource fixups > > Tell the PCI core about host bridge address translation so it can take > care of bus-to-resource conversion for us. > > CC: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> > Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > > The only seemingly relevant differences in the boot logs (good to bad) are: > > pci 0000:03:02.0: supports D1 D2 > +PCI: Cannot allocate resource region 0 of PCI bridge 1, will remap > +PCI: Cannot allocate resource region 1 of PCI bridge 1, will remap > +PCI: Cannot allocate resource region 0 of PCI bridge 6, will remap > +PCI: Cannot allocate resource region 1 of PCI bridge 6, will remap > +PCI: Cannot allocate resource region 0 of PCI bridge 3, will remap > +PCI: Cannot allocate resource region 1 of PCI bridge 3, will remap > +PCI: Cannot allocate resource region 0 of device 0000:01:01.0, will remap > +PCI: Cannot allocate resource region 2 of device 0000:01:01.0, will remap > +PCI: Cannot allocate resource region 6 of device 0000:01:01.0, will remap > +PCI: Cannot allocate resource region 0 of device 0000:03:00.0, will remap > +PCI: Cannot allocate resource region 0 of device 0000:03:00.1, will remap > +PCI: Cannot allocate resource region 0 of device 0000:03:02.0, will remap > +PCI: Cannot allocate resource region 1 of device 0000:03:02.0, will remap > +PCI: Cannot allocate resource region 2 of device 0000:03:02.0, will remap > +PCI: Cannot allocate resource region 6 of device 0000:03:02.0, will remap > +PCI: Cannot allocate resource region 0 of device 0000:06:04.0, will remap > +PCI: Cannot allocate resource region 2 of device 0000:06:04.0, will remap > +PCI: Cannot allocate resource region 0 of device 0000:06:04.1, will remap > +PCI: Cannot allocate resource region 2 of device 0000:06:04.1, will remap > PCI: Probing PCI hardware done > . > . > . > calling .radeonfb_init+0x0/0x248 @ 1 > -radeonfb 0000:03:02.0: Invalid ROM contents > -radeonfb (0000:03:02.0): Invalid ROM signature 7272 should be 0xaa55 > -radeonfb: No ATY,RefCLK property ! > -xtal calculation failed: 26550 > -radeonfb: Used default PLL infos > -radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz > -radeonfb: PLL min 12000 max 35000 > -i2c i2c-1: unable to read EDID block. > -i2c i2c-1: unable to read EDID block. > -i2c i2c-1: unable to read EDID block. > -i2c i2c-3: unable to read EDID block. > -i2c i2c-3: unable to read EDID block. > -i2c i2c-3: unable to read EDID block. > -i2c i2c-2: unable to read EDID block. > -i2c i2c-2: unable to read EDID block. > -i2c i2c-2: unable to read EDID block. > -i2c i2c-3: unable to read EDID block. > -i2c i2c-3: unable to read EDID block. > -i2c i2c-3: unable to read EDID block. > -radeonfb: Monitor 1 type CRT found > -radeonfb: Monitor 2 type no found > -Console: switching to colour frame buffer device 80x30 > -radeonfb (0000:03:02.0): ATI Radeon 515e "Q^" > +radeonfb 0000:03:02.0: device not available (can't reserve [mem 0x00000000-0x07ffffff]) > +radeonfb (0000:03:02.0): Cannot enable PCI device > +radeonfb: probe of 0000:03:02.0 failed with error -22 > initcall .radeonfb_init+0x0/0x248 returned 0 after x usecs > . > . > . > ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011) > -ipr 0000:01:01.0: Found IOA with IRQ: 26 > -ipr 0000:01:01.0: Starting IOA initialization sequence. > -ipr 0000:01:01.0: Adapter firmware version: 06160039 > -ipr 0000:01:01.0: IOA initialized. > -scsi0 : IBM 572E Storage Adapter > -scsi 0:0:1:0: Direct-Access IBM-ESXS MAY2036RC T106 PQ: 0 ANSI: 5 > -scsi: unknown device type 31 > -scsi 0:255:255:255: No Device IBM 572E001 0150 PQ: 0 ANSI: 0 > +ipr 0000:01:01.0: device not available (can't reserve [mem 0x00000000-0x0003ffff]) > +ipr 0000:01:01.0: Cannot enable adapter > +ipr: probe of 0000:01:01.0 failed with error -22 > initcall .ipr_init+0x0/0x68 returned 0 after x usecs > . > . > . > calling .tg3_init+0x0/0x3c @ 1 > tg3.c:v3.122 (December 7, 2011) > -tg3 0000:06:04.0: enabling device (0140 -> 0142) > -sd 0:0:1:0: [sda] 71096640 512-byte logical blocks: (36.4 GB/33.9 GiB) > -sd 0:0:1:0: [sda] Write Protect is off > -sd 0:0:1:0: [sda] Mode Sense: d7 00 00 08 > -sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA > - sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > > -sd 0:0:1:0: [sda] Attached SCSI disk > -initcall 1_.sd_probe_async+0x0/0x1d0 returned 0 after x usecs > -tg3 0000:06:04.0: eth0: Tigon3 [partno(none) rev 8100] (PCIX:133MHz:64-bit) MAC address 00:14:5e:9c:21:e2 > -tg3 0000:06:04.0: eth0: attached PHY is 5780 (1000Base-SX Ethernet) (WireSpeed[0], EEE[0]) > -tg3 0000:06:04.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] > -tg3 0000:06:04.0: eth0: dma_rwctrl[76144000] dma_mask[40-bit] > -tg3 0000:06:04.1: enabling device (0140 -> 0142) > -tg3 0000:06:04.1: eth1: Tigon3 [partno(none) rev 8100] (PCIX:133MHz:64-bit) MAC address 00:14:5e:9c:21:e3 > -tg3 0000:06:04.1: eth1: attached PHY is 5780 (1000Base-SX Ethernet) (WireSpeed[0], EEE[0]) > -tg3 0000:06:04.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] > -tg3 0000:06:04.1: eth1: dma_rwctrl[76144000] dma_mask[40-bit] > +tg3 0000:06:04.0: device not available (can't reserve [mem 0x00000000-0x0000ffff]) > +tg3 0000:06:04.0: Cannot enable PCI device, aborting > +tg3: probe of 0000:06:04.0 failed with error -22 > +tg3 0000:06:04.1: device not available (can't reserve [mem 0x00000000-0x0000ffff]) > +tg3 0000:06:04.1: Cannot enable PCI device, aborting > +tg3: probe of 0000:06:04.1 failed with error -22 > initcall .tg3_init+0x0/0x3c returned 0 after x usecs > . > . > . > calling .ohci_hcd_mod_init+0x0/0xfc @ 1 > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > -ohci_hcd 0000:03:00.0: OHCI Host Controller > -ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 > -ohci_hcd 0000:03:00.0: irq 19, io mem 0x100a1001000 > -hub 1-0:1.0: USB hub found > -hub 1-0:1.0: 3 ports detected > -ohci_hcd 0000:03:00.1: OHCI Host Controller > -ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2 > -ohci_hcd 0000:03:00.1: irq 19, io mem 0x100a1000000 > -hub 2-0:1.0: USB hub found > -hub 2-0:1.0: 3 ports detected > +ohci_hcd 0000:03:00.0: device not available (can't reserve [mem 0x00000000-0x00000fff]) > +ohci_hcd 0000:03:00.1: device not available (can't reserve [mem 0x00000000-0x00000fff]) > initcall .ohci_hcd_mod_init+0x0/0xfc returned 0 after x usecs > > -- > Cheers, > Stephen Rothwell sfr@xxxxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-next" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
