Thanks Ray!
ray@xxxxxxxxxxx said:
> I'm assuming the modem is attached to a serial port
Yes, has been for years.
ls -l /dev/modem
lrwxrwxrwx 1 root root 10 2006-07-18 20:29 /dev/modem -> /dev/tts/1
sudo /sbin/setserial /dev/ttyS1 -a
/dev/ttyS1, Line 1, UART: unknown, Port: 0x02f8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test auto_irq
ttyS1 used to be the place from which to run the modem I know for sure when I
had kppp installed.
sudo /sbin/setserial /dev/ttyS2 -a
/dev/ttyS2, Line 2, UART: unknown, Port: 0x03e8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test auto_irq
Now this is the output in Fed4 at ttyS0:
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
To which modem etc. connects properly.
Doing
sudo /sbin/setserial /dev/ttyS1 uart 16550A
I get
heisspf@~:$ sudo /sbin/setserial /dev/ttyS1 -a
/dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test auto_irq
With microcom which I snatched from my DSL box where again the modem is
working properly:
sudo /usr/local/Microcom/microcom
Try /dev/ttyS0
/dev/ttyS0 not found
Try /dev/ttyS1
/dev/ttyS1 not responding (after I set the uart 16550A)
Try /dev/ttyS2
/dev/ttyS2 not responding
Try /dev/ttyS3
/dev/ttyS3 not responding
In this kernel 2.6.16 there is no more ttyS0 instead /dev/tts/1 to 3. I know
it was working with kernel 2.6.14 but now it does not even work with 2.4.31.
Something broke somewhere.
Fedora4 does not run setserial neither does DSL.
Regards
--
Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
