Re: How to correctly create multiple bonding interfaces in kernel 2.6.29.6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Matt,

No, the switch is not playing a role here.
I am using mode balance-alb ( 6 ) in bond0 for the switch and 802.3ad ( 4 ) in bond1 which is cross over connection between the 2 servers. The switch does support Link / Port / Ethernet / NIC Aggregation / Trunking / Channeling / Teaming (802.3ad). It is a Cisco Catalyst 2960G, by the way. After I configure the switch I will probably only use 802.3ad, as that is the standard. Also, it was working fine with kernel 2.6.26 in this very same environment.

So you are saying the way to go is to use the sysfs interface ( /sys ; those echo commands ), right?

I have already tried that a little bit, but I will try to put more time into that again.

Does anybody would be able to tell me the all the steps to create 2 bonding interfaces with different options using sysfs?


Thanks,


-----Original Message-----
From: Matt Zagrabelny
Cc: linux-net@xxxxxxxxxxxxxxx
Sent: Tue, Feb 2, 2010 4:27 pm
Subject: Re: How to correctly create multiple bonding interfaces in kernel 2.6.29.6


On Tue, 2010-02-02 at 16:21 -0500, Hugo wrote:
Matt,

This OpenFiler 2.3, which based on rPath Linux, which I believe
follow
a little the RedHat line.

I do not think the Debian  based commnds / mehtods work for this...

Yes, I have been reading the kernel docs a lot, bonding.txt...
I have been trying all those methods.

I think I always ended with the stability issue: 10 s of working
pings
and 10 s of time outs...

I was mainly trying to use the full "install bond0 /sbin/modprobe"
commands in modprobe.conf.

By the way, I have 2 x e1000 (Intel Gigabit) and 2 x tg3 (NetXtreme).

What else?

What type of switching gear are you connected to? Are you sure that is
configured correctly?

I would try factoring out the settings of your bond from the modprobe
command to echo's to /sys/. Then you don't need to rm the module and
reprobe it back in.

--
Matt Zagrabelny - mzagrabe@xxxxxxxxx - (218) 726 8844
University of Minnesota Duluth
Information Technology Systems & Services
PGP key 4096R/42A00942 2009-12-16
Fingerprint: 5814 2CCE 2383 2991 83FF  C899 07E2 BFA8 42A0 0942

He is not a fool who gives up what he cannot keep to gain what he cannot
lose.
-Jim Elliot

--
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux