Re: conntrack doesn't always work when a bridge is used

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Damien Thébault wrote:
Yes, when I'm using ip addresses with the same length, the conntrack
-E output is similar, and it's working.
But if I change the router's "wan"-side ip address to be longer or
shorter than the client's ip address, then it's non-working again.

I don't think it's something in the configuration : the results are
present on two different computers, one being a x86 little endian
debian laptop where I did the bisect, the other being an arm xscale
big endian board with a custom distro (nothing funny here, just
kernel, drivers, busybox and  some utilities).

Well, I'm sorry, I don't want to bother anyone, but those are really
the results I'm seeing.


Don't worry. I was just wondering because I asked for the output
of the *non-working* case :) Please post that and I'll look into it.
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux