On Mon, 2007-04-16 at 09:55 -0400, John W. Linville wrote: > You may want to try at linux-wireless@xxxxxxxxxxxxxxx instead... > > On Mon, Apr 16, 2007 at 10:41:21AM +0200, Stefan Puch wrote: > > Hi everyone, > > > > I found on this mailinglist the thread from chunkeey who added WPA support for > > prism54 fullmac cards > > > > http://www.spinics.net/lists/netdev/msg16224.html That patch had some issues that I think were brought up in replies. It needs some cleanup. If you see the "triggering due to management timeout" thing, that's the card not replying to commands from the driver quickly enough, meaning the firmware crashed or hung, and so the driver resets the card. Basically, somebody needs to go through the patch from Chunkeey and extract the useful parts. It wasn't the most easily readable patch and there were some questionable decisions in there, but I don't think he replied with rationale for some of the changes. Dan > > The last days I tried to get this driver working, but I was not able to. After > > "googling" and reading the mails I found that Jim Faulkner have had similar > > problems, see posting on this mailing list here: > > > > http://www.spinics.net/lists/linux-net/msg14821.html > > > > So I tried to make hopefully "useful" debug traces, perhaps anyone can tell me > > why it doesn't work? > > > > The Hardware: > > Access point: AVM Fritz!Box Fon WLAN 7170 (last stable Firmware) > > Laptop: Fujitsu Siemens Lifebook C > > WLAN-Adapter: Netgear WG511 (Fullmac) > > > > > > The Software: > > - Vanilla Kernel 2.6.20.6 (WE-21) > > - Wireless Tools version 29-pre17 (The main features is WE-21 support) > > - firmware Version 1.0.4.3 (from www.prism54.org) > > - wpa_supplicant Version 0.5.5 > > - as reference ndiswrapper version 1.41 > > > > First of all I tried the good old WEP encryption with the prism54 driver: No > > problem, it works fine with the firmware 1.0.4.3!!! > > > > Next step was to try get a WPA connection to the access point. I can load the > > kernel module, the firmware is loaded correctly, too. > > Only the connection with wpa_supplicant doesn't establish (debug trace attached > > this email), here's my wpa_supplicant.conf: > > > > ctrl_interface=/var/run/wpa_supplicant > > network={ > > ssid="puch.home" > > scan_ssid=1 > > proto=WPA > > key_mgmt=WPA-PSK > > psk="ThisIsATestWPA-Key" > > } > > > > As reference I tried to connect to the access point using ndiswrapper and > > wpa_supplicant (same wpa_supplicant.conf). There the connection is established. > > I attached the debug trace, too so everyone can see where the differences are) > > > > Please let me know, if there are important infos missing and CC me in any > > responses, because I'm not subscribed to this mailing list. > > > > Thanks in advance for any comment or help, > > > > Stefan Puch > > > > --------------------------------------------------------------------------------- > > debug traces: > > --------------------------------------------------------------------------------- > > > > > Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' > > Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' > > Reading configuration file '/etc/wpa_supplicant.conf' > > ctrl_interface='/var/run/wpa_supplicant' > > Line: 4 - start of a new network block > > ssid - hexdump_ascii(len=9): > > 70 75 63 68 2e 68 6f 6d 65 puch.home > > scan_ssid=1 (0x1) > > PSK (ASCII passphrase) - hexdump_ascii(len=18): > > 54 68 69 73 49 73 41 54 65 73 74 57 50 41 2d 4b ThisIsATestWPA-K > > 65 79 ey > > key_mgmt: 0x2 > > proto: 0x1 > > PSK (from passphrase) - hexdump(len=32): 44 49 84 4d 00 d4 0c 0a 3a bd 2e 33 89 3b d2 39 bc e2 5c 9c 81 38 43 64 6c 9b c0 4b 00 34 5c e5 > > Priority group 0 > > id=0 ssid='puch.home' > > Initializing interface (2) 'eth1' > > EAPOL: SUPP_PAE entering state DISCONNECTED > > EAPOL: KEY_RX entering state NO_KEY_RECEIVE > > EAPOL: SUPP_BE entering state INITIALIZE > > EAP: EAP entering state DISABLED > > EAPOL: External notification - portEnabled=0 > > EAPOL: External notification - portValid=0 > > SIOCGIWRANGE: WE(compiled)=21 WE(source)=19 enc_capa=0x7 > > capabilities: key_mgmt 0xf enc 0x7 > > WEXT: Operstate: linkmode=1, operstate=5 > > Own MAC address: 00:09:5b:c9:5b:52 > > wpa_driver_wext_set_wpa > > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_countermeasures > > wpa_driver_wext_set_drop_unencrypted > > Setting scan request: 0 sec 100000 usec > > Added interface eth1 > > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > > Wireless event: cmd=0x8b06 len=8 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) > > RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added > > RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) > > RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=70 > > WEXT: Custom wireless event: 'Received a beacon from an unkown AP to 00:15:0C:D6:C7:74 (00)' > > State: DISCONNECTED -> SCANNING > > Starting AP scan (specific SSID) > > Scan SSID - hexdump_ascii(len=9): > > 70 75 63 68 2e 68 6f 6d 65 puch.home > > Trying to get current scan results first without requesting a new scan to speed up initial association > > Received 207 bytes of scan results (1 BSSes) > > Scan results: 1 > > Selecting BSS from priority group 0 > > 0: 00:15:0c:d6:c7:74 ssid='puch.home' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 > > selected based on WPA IE > > Trying to associate with 00:15:0c:d6:c7:74 (SSID='puch.home' freq=2412 MHz) > > Cancelling scan request > > WPA: clearing own WPA/RSN IE > > Automatic auth_alg selection: 0x1 > > WPA: using IEEE 802.11i/D3.0 > > WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 > > WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > > WPA: clearing AP RSN IE > > WPA: using GTK TKIP > > WPA: using PTK TKIP > > WPA: using KEY_MGMT WPA-PSK > > WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > > No keys have been configured - skip key clearing > > wpa_driver_wext_set_drop_unencrypted > > State: SCANNING -> ASSOCIATING > > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > > WEXT: Operstate: linkmode=-1, operstate=5 > > wpa_driver_wext_associate > > Setting authentication timeout: 10 sec 0 usec > > EAPOL: External notification - EAP success=0 > > EAPOL: External notification - EAP fail=0 > > EAPOL: External notification - portControl=Auto > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8b06 len=8 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8b04 len=12 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8b1a len=17 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=70 > > WEXT: Custom wireless event: 'Received a beacon from an unkown AP to 00:C0:49:E1:3B:61 (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=63 > > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=70 > > WEXT: Custom wireless event: 'Received a beacon from an unkown AP to 00:15:0C:D6:C7:74 (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=63 > > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=72 > > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=72 > > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=72 > > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=63 > > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > > Authentication with 00:00:00:00:00:00 timed out. > > Added BSSID 00:15:0c:d6:c7:74 into blacklist > > State: ASSOCIATING -> DISCONNECTED > > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > > WEXT: Operstate: linkmode=-1, operstate=5 > > No keys have been configured - skip key clearing > > EAPOL: External notification - portEnabled=0 > > EAPOL: External notification - portValid=0 > > Setting scan request: 0 sec 0 usec > > State: DISCONNECTED -> SCANNING > > Starting AP scan (broadcast SSID) > > Scan timeout - try to get results > > Received 383 bytes of scan results (2 BSSes) > > Scan results: 2 > > Selecting BSS from priority group 0 > > 0: 00:15:0c:d6:c7:74 ssid='puch.home' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 > > selected based on WPA IE > > Trying to associate with 00:15:0c:d6:c7:74 (SSID='puch.home' freq=2412 MHz) > > Cancelling scan request > > WPA: clearing own WPA/RSN IE > > Automatic auth_alg selection: 0x1 > > WPA: using IEEE 802.11i/D3.0 > > WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 > > WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > > WPA: clearing AP RSN IE > > WPA: using GTK TKIP > > WPA: using PTK TKIP > > WPA: using KEY_MGMT WPA-PSK > > WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > > No keys have been configured - skip key clearing > > wpa_driver_wext_set_drop_unencrypted > > State: SCANNING -> ASSOCIATING > > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > > WEXT: Operstate: linkmode=-1, operstate=5 > > wpa_driver_wext_associate > > Setting authentication timeout: 10 sec 0 usec > > EAPOL: External notification - EAP success=0 > > EAPOL: External notification - EAP fail=0 > > EAPOL: External notification - portControl=Auto > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8b06 len=8 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8b04 len=12 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8b1a len=17 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=63 > > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=70 > > WEXT: Custom wireless event: 'Received a beacon from an unkown AP to 00:15:0C:D6:C7:74 (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=63 > > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=72 > > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=72 > > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c02 len=72 > > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > > CTRL-EVENT-TERMINATING - signal 2 received > > Removing interface eth1 > > State: ASSOCIATING -> DISCONNECTED > > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > > WEXT: Operstate: linkmode=-1, operstate=5 > > No keys have been configured - skip key clearing > > EAPOL: External notification - portEnabled=0 > > EAPOL: External notification - portValid=0 > > wpa_driver_wext_set_wpa > > wpa_driver_wext_set_drop_unencrypted > > wpa_driver_wext_set_countermeasures > > No keys have been configured - skip key clearing > > WEXT: Operstate: linkmode=0, operstate=6 > > Removed BSSID 00:15:0c:d6:c7:74 from blacklist (clear) > > Cancelling scan request > > > > > Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' > > Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' > > Reading configuration file '/etc/wpa_supplicant.conf' > > ctrl_interface='/var/run/wpa_supplicant' > > Line: 4 - start of a new network block > > ssid - hexdump_ascii(len=9): > > 70 75 63 68 2e 68 6f 6d 65 puch.home > > scan_ssid=1 (0x1) > > PSK (ASCII passphrase) - hexdump_ascii(len=18): > > 54 68 69 73 49 73 41 54 65 73 74 57 50 41 2d 4b ThisIsATestWPA-K > > 65 79 ey > > key_mgmt: 0x2 > > proto: 0x1 > > PSK (from passphrase) - hexdump(len=32): 44 49 84 4d 00 d4 0c 0a 3a bd 2e 33 89 3b d2 39 bc e2 5c 9c 81 38 43 64 6c 9b c0 4b 00 34 5c e5 > > Priority group 0 > > id=0 ssid='puch.home' > > Initializing interface (2) 'wlan0' > > EAPOL: SUPP_PAE entering state DISCONNECTED > > EAPOL: KEY_RX entering state NO_KEY_RECEIVE > > EAPOL: SUPP_BE entering state INITIALIZE > > EAP: EAP entering state DISABLED > > EAPOL: External notification - portEnabled=0 > > EAPOL: External notification - portValid=0 > > SIOCGIWRANGE: WE(compiled)=21 WE(source)=18 enc_capa=0xf > > capabilities: key_mgmt 0xf enc 0xf > > WEXT: Operstate: linkmode=1, operstate=5 > > Own MAC address: 00:09:5b:c9:5b:52 > > wpa_driver_wext_set_wpa > > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_countermeasures > > wpa_driver_wext_set_drop_unencrypted > > Setting scan request: 0 sec 100000 usec > > Added interface wlan0 > > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > > Wireless event: cmd=0x8b06 len=8 > > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > > State: DISCONNECTED -> SCANNING > > Starting AP scan (specific SSID) > > Scan SSID - hexdump_ascii(len=9): > > 70 75 63 68 2e 68 6f 6d 65 puch.home > > Trying to get current scan results first without requesting a new scan to speed up initial association > > Received 489 bytes of scan results (2 BSSes) > > Scan results: 2 > > Selecting BSS from priority group 0 > > 0: 00:15:0c:d6:c7:74 ssid='puch.home' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 > > selected based on WPA IE > > Trying to associate with 00:15:0c:d6:c7:74 (SSID='puch.home' freq=2412 MHz) > > Cancelling scan request > > WPA: clearing own WPA/RSN IE > > Automatic auth_alg selection: 0x1 > > WPA: using IEEE 802.11i/D3.0 > > WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 > > WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > > WPA: clearing AP RSN IE > > WPA: using GTK TKIP > > WPA: using PTK TKIP > > WPA: using KEY_MGMT WPA-PSK > > WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > > No keys have been configured - skip key clearing > > wpa_driver_wext_set_drop_unencrypted > > State: SCANNING -> ASSOCIATING > > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > > WEXT: Operstate: linkmode=-1, operstate=5 > > wpa_driver_wext_associate > > Setting authentication timeout: 10 sec 0 usec > > EAPOL: External notification - EAP success=0 > > EAPOL: External notification - EAP fail=0 > > EAPOL: External notification - portControl=Auto > > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > > Wireless event: cmd=0x8b06 len=8 > > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > > Wireless event: cmd=0x8b04 len=12 > > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > > Wireless event: cmd=0x8b1a len=17 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c07 len=59 > > AssocReq IE wireless event - hexdump(len=51): 00 09 70 75 63 68 2e 68 6f 6d 65 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8c08 len=24 > > AssocResp IE wireless event - hexdump(len=16): 01 04 82 84 8b 96 32 08 0c 12 18 24 30 48 60 6c > > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > > Wireless event: cmd=0x8b15 len=20 > > Wireless event: new AP: 00:15:0c:d6:c7:74 > > Association info event > > req_ies - hexdump(len=51): 00 09 70 75 63 68 2e 68 6f 6d 65 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > > resp_ies - hexdump(len=16): 01 04 82 84 8b 96 32 08 0c 12 18 24 30 48 60 6c > > WPA: set own WPA/RSN IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > > State: ASSOCIATING -> ASSOCIATED > > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > > WEXT: Operstate: linkmode=-1, operstate=5 > > Associated to a new BSS: BSSID=00:15:0c:d6:c7:74 > > No keys have been configured - skip key clearing > > Associated with 00:15:0c:d6:c7:74 > > WPA: Association event - clear replay counter > > EAPOL: External notification - portEnabled=0 > > EAPOL: External notification - portValid=0 > > EAPOL: External notification - EAP success=0 > > EAPOL: External notification - portEnabled=1 > > EAPOL: SUPP_PAE entering state CONNECTING > > EAPOL: SUPP_BE entering state IDLE > > Setting authentication timeout: 10 sec 0 usec > > Cancelling scan request > > RX EAPOL from 00:15:0c:d6:c7:74 > > RX EAPOL - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 00 01 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Setting authentication timeout: 10 sec 0 usec > > IEEE 802.1X RX: version=1 type=3 length=95 > > EAPOL-Key type=254 > > key_info 0x89 (ver=1 keyidx=0 rsvd=0 Pairwise Ack) > > key_length=32 key_data_length=0 > > replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01 > > key_nonce - hexdump(len=32): 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 > > key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 > > key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 > > key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 00 01 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > State: ASSOCIATED -> 4WAY_HANDSHAKE > > WPA: RX message 1 of 4-Way Handshake from 00:15:0c:d6:c7:74 (ver=1) > > WPA: Renewed SNonce - hexdump(len=32): 2e e3 7a cc cd 1e 3f e1 17 76 10 f1 8b 6e dc 53 5f c0 31 b9 71 40 e2 7b a3 04 75 0c 66 9d 95 01 > > WPA: PMK - hexdump(len=32): 44 49 84 4d 00 d4 0c 0a 3a bd 2e 33 89 3b d2 39 bc e2 5c 9c 81 38 43 64 6c 9b c0 4b 00 34 5c e5 > > WPA: PTK - hexdump(len=64): 7c d3 49 82 93 2d fc 6f 23 41 7c 1b 33 cf 5d be c1 2f a2 39 d5 76 c1 20 e9 b3 b1 18 3e 9e 45 74 c2 b7 cb b8 b6 ae ab 63 d3 fd 23 b6 cb 6c 2b 11 1d eb 7a 29 09 97 da fa a4 ea e3 b5 0c a2 af 22 > > WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > > WPA: Sending EAPOL-Key 2/4 > > WPA: TX EAPOL-Key - hexdump(len=123): 01 03 00 77 fe 01 09 00 20 00 00 00 00 00 00 00 01 2e e3 7a cc cd 1e 3f e1 17 76 10 f1 8b 6e dc 53 5f c0 31 b9 71 40 e2 7b a3 04 75 0c 66 9d 95 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e7 8f 0a 5a 75 f2 89 57 b0 1a 05 ce 6a 8d 81 bc 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > > RX EAPOL from 00:15:0c:d6:c7:74 > > RX EAPOL - hexdump(len=125): 01 03 00 79 fe 01 c9 00 20 00 00 00 00 00 00 00 02 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9a ab b0 de f9 2d d0 1f ca e3 17 b6 45 05 f2 bf 00 1a dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > > IEEE 802.1X RX: version=1 type=3 length=121 > > EAPOL-Key type=254 > > key_info 0x1c9 (ver=1 keyidx=0 rsvd=0 Pairwise Install Ack MIC) > > key_length=32 key_data_length=26 > > replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02 > > key_nonce - hexdump(len=32): 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 > > key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 > > key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 > > key_mic - hexdump(len=16): 9a ab b0 de f9 2d d0 1f ca e3 17 b6 45 05 f2 bf > > WPA: RX EAPOL-Key - hexdump(len=125): 01 03 00 79 fe 01 c9 00 20 00 00 00 00 00 00 00 02 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9a ab b0 de f9 2d d0 1f ca e3 17 b6 45 05 f2 bf 00 1a dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > > State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE > > WPA: RX message 3 of 4-Way Handshake from 00:15:0c:d6:c7:74 (ver=1) > > WPA: IE KeyData - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > > WPA: Sending EAPOL-Key 4/4 > > WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 01 09 00 20 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e bb 0b 30 e4 9f aa f4 ba 44 93 4c 01 68 d3 97 00 00 > > WPA: Installing PTK to the driver. > > WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 > > wpa_driver_wext_set_key: alg=2 key_idx=0 set_tx=1 seq_len=6 key_len=32 > > State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE > > RX EAPOL from 00:15:0c:d6:c7:74 > > RX EAPOL - hexdump(len=131): 01 03 00 7f fe 03 a1 00 20 00 00 00 00 00 00 00 03 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b a2 ed 59 9c 0f e7 1e 70 ba 81 11 44 29 8d 13 00 20 14 72 27 88 67 7e e5 bd e0 fb 45 25 aa ea f5 a3 9a f1 86 35 18 f4 95 e7 71 b6 c0 c1 62 ba 80 97 > > IEEE 802.1X RX: version=1 type=3 length=127 > > EAPOL-Key type=254 > > key_info 0x3a1 (ver=1 keyidx=2 rsvd=0 Group Ack MIC Secure) > > key_length=32 key_data_length=32 > > replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 03 > > key_nonce - hexdump(len=32): 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 > > key_iv - hexdump(len=16): 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 > > key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 > > key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 > > key_mic - hexdump(len=16): 2b a2 ed 59 9c 0f e7 1e 70 ba 81 11 44 29 8d 13 > > WPA: RX EAPOL-Key - hexdump(len=131): 01 03 00 7f fe 03 a1 00 20 00 00 00 00 00 00 00 03 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b a2 ed 59 9c 0f e7 1e 70 ba 81 11 44 29 8d 13 00 20 14 72 27 88 67 7e e5 bd e0 fb 45 25 aa ea f5 a3 9a f1 86 35 18 f4 95 e7 71 b6 c0 c1 62 ba 80 97 > > WPA: RX message 1 of Group Key or STAKey Handshake from 00:15:0c:d6:c7:74 (ver=1) > > State: GROUP_HANDSHAKE -> GROUP_HANDSHAKE > > WPA: Group Key - hexdump(len=32): 4e 6c c3 3d 3a c5 a6 49 db 31 9d ab 2e b7 15 6f 38 e9 0a ef 7d 14 7a da a0 fa cb 3e c5 c1 b8 b6 > > WPA: Installing GTK to the driver (keyidx=2 tx=0). > > WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 > > wpa_driver_wext_set_key: alg=2 key_idx=2 set_tx=0 seq_len=6 key_len=32 > > WPA: Sending EAPOL-Key 2/2 > > WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 03 21 00 20 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 59 fb ed dc 79 e9 fd 4f 65 e1 41 67 42 97 c8 58 00 00 > > WPA: Key negotiation completed with 00:15:0c:d6:c7:74 [PTK=TKIP GTK=TKIP] > > Cancelling authentication timeout > > State: GROUP_HANDSHAKE -> COMPLETED > > CTRL-EVENT-CONNECTED - Connection to 00:15:0c:d6:c7:74 completed (auth) [id=0 id_str=] > > wpa_driver_wext_set_operstate: operstate 0->1 (UP) > > WEXT: Operstate: linkmode=-1, operstate=6 > > EAPOL: External notification - portValid=1 > > EAPOL: External notification - EAP success=1 > > EAPOL: SUPP_PAE entering state AUTHENTICATING > > EAPOL: SUPP_BE entering state SUCCESS > > EAP: EAP entering state DISABLED > > EAPOL: SUPP_PAE entering state AUTHENTICATED > > EAPOL: SUPP_BE entering state IDLE > > RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) > > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > > RX EAPOL from 00:15:0c:d6:c7:74 > > RX EAPOL - hexdump(len=131): 01 03 00 7f fe 03 a1 00 20 00 00 00 00 00 00 00 04 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 97 6b 70 91 95 9e c6 ab 10 f1 d0 61 1d 55 7c 00 20 14 72 27 88 67 7e e5 bd e0 fb 45 25 aa ea f5 a3 9a f1 86 35 18 f4 95 e7 71 b6 c0 c1 62 ba 80 97 > > IEEE 802.1X RX: version=1 type=3 length=127 > > EAPOL-Key type=254 > > key_info 0x3a1 (ver=1 keyidx=2 rsvd=0 Group Ack MIC Secure) > > key_length=32 key_data_length=32 > > replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 04 > > key_nonce - hexdump(len=32): 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 > > key_iv - hexdump(len=16): 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 > > key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 > > key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 > > key_mic - hexdump(len=16): 64 97 6b 70 91 95 9e c6 ab 10 f1 d0 61 1d 55 7c > > WPA: RX EAPOL-Key - hexdump(len=131): 01 03 00 7f fe 03 a1 00 20 00 00 00 00 00 00 00 04 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 97 6b 70 91 95 9e c6 ab 10 f1 d0 61 1d 55 7c 00 20 14 72 27 88 67 7e e5 bd e0 fb 45 25 aa ea f5 a3 9a f1 86 35 18 f4 95 e7 71 b6 c0 c1 62 ba 80 97 > > WPA: RX message 1 of Group Key or STAKey Handshake from 00:15:0c:d6:c7:74 (ver=1) > > State: COMPLETED -> GROUP_HANDSHAKE > > WPA: Group Key - hexdump(len=32): 4e 6c c3 3d 3a c5 a6 49 db 31 9d ab 2e b7 15 6f 38 e9 0a ef 7d 14 7a da a0 fa cb 3e c5 c1 b8 b6 > > WPA: Installing GTK to the driver (keyidx=2 tx=0). > > WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 > > wpa_driver_wext_set_key: alg=2 key_idx=2 set_tx=0 seq_len=6 key_len=32 > > WPA: Sending EAPOL-Key 2/2 > > WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 03 21 00 20 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 1a 45 42 95 40 d8 d7 ab b5 58 53 40 e0 5a e8 00 00 > > WPA: Group rekeying completed with 00:15:0c:d6:c7:74 [GTK=TKIP] > > State: GROUP_HANDSHAKE -> COMPLETED > > EAPOL: startWhen --> 0 > > CTRL-EVENT-TERMINATING - signal 2 received > > Removing interface wlan0 > > State: COMPLETED -> DISCONNECTED > > wpa_driver_wext_set_operstate: operstate 1->0 (DORMANT) > > WEXT: Operstate: linkmode=-1, operstate=5 > > wpa_driver_wext_deauthenticate > > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > > EAPOL: External notification - portEnabled=0 > > EAPOL: SUPP_PAE entering state DISCONNECTED > > EAPOL: SUPP_BE entering state INITIALIZE > > EAPOL: External notification - portValid=0 > > wpa_driver_wext_set_wpa > > wpa_driver_wext_set_drop_unencrypted > > wpa_driver_wext_set_countermeasures > > No keys have been configured - skip key clearing > > WEXT: Operstate: linkmode=0, operstate=6 > > Cancelling scan request > > > > > DRIVER NDISWRAPPER: > > > > [root@caelum space]# iwconfig -v > > iwconfig Wireless-Tools version 29 > > Compatible with Wireless Extension v11 to v21. > > > > Kernel Currently compiled with Wireless Extension v21. > > > > wlan0 Recommend Wireless Extension v18 or later, > > Currently compiled with Wireless Extension v21. > > > > [root@caelum space]# > > > > ---------------------------------------------------------- > > > > DRIVER PRISM54: > > > > [root@caelum space]# iwconfig -v > > iwconfig Wireless-Tools version 29 > > Compatible with Wireless Extension v11 to v21. > > > > Kernel Currently compiled with Wireless Extension v21. > > > > eth1 Recommend Wireless Extension v19 or later, > > Currently compiled with Wireless Extension v21. > > > > [root@caelum space]# > > > > > > > > - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
