2.6.18 U.S. Robotics USR997902 recognized but "device not found" on ifconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



graphe:/home/christoph# ifconfig eth1
eth1: error fetching interface information: Device not found

Worked fine with 2.6.17.

graphe:/home/christoph# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 755 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:09.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
00:0b.0 Ethernet controller: U.S. Robotics USR997902 10/100/1000 Mbps PCI Network Card (rev 10)
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
00:0d.0 VGA compatible controller: S3 Inc. 86c325 [ViRGE] (rev 06)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

dmesg:

...

eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 16, 00:11:5b:8c:95:77.

...

r8169 Gigabit Ethernet driver 2.2LK loaded
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: Identified chip type is 'RTL8169s/8110s'.
eth1: RTL8169 at 0xffffc2000001a000, 00:14:c1:0f:58:29, IRQ 17
r8169 Gigabit Ethernet driver 2.2LK loaded
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 18
eth2: Identified chip type is 'RTL8169s/8110s'.
eth2: RTL8169 at 0xffffc2000001c000, 00:40:f4:ed:6c:e9, IRQ 18

...

Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
tulip0:  MII transceiver #1 config 3100 status 7809 advertising 01e1.
eth3: Lite-On 82c168 PNIC rev 32 at ffffc20000074000, 00:C0:F0:2D:DB:C6, 
IRQ 17.



-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux