Problem with D-Link DFE-580TX 4 port NIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi everyone,

I'm trying to diagnose a problem with transmission timeouts on the 580TX and
don't seem to be getting much from the net-drivers list @ scyld so though I
would try here :)

The original email with some diagnostic output can be found at
http://www.scyld.com/pipermail/netdrivers/2004-December/000122.html, and I'm
guessing that somehow the on-board chip is being programmed incorrectly :(.
The card I have here is a revision A3 which contains the following chips: an
Intel 21152 (4-1 PCI multiplexer) and 4 DL10050C NIC controllers.

I would really like to get this driver working, but can't find the datasheet
for the DL10050C or the ST201 chip as mentioned in the sundance.c source.
Can anyone possibly point me towards a datasheet so I can look into this???
I did see a mention that the ST201 was actually a clone of a 3Com series
card, but couldn't confirm if this was down to a drop-in chip replacement.


Many thanks,

Mark.

------------------------
WebBased Ltd
South West Technology Centre
Tamar Science Park
Plymouth
PL6 8BT 

T: +44 (0)1752 791021
F: +44 (0)1752 791023
W: http://www.webbased.co.uk
 


-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux