The next version of the driver (v6.18) will remove all unused CONFIG_SK98LIN_T* options. I'll send the new version to Jeff tomorrow. Cheers, Mirko --------- Original-Nachricht -------- Von: Adrian Bunk <bunk@fs.tum.de> An: linux@syskonnect.de <linux@syskonnect.de> Cc: linux-kernel@vger.kernel.org, linux-net@vger.kernel.org, jgarzik@pobox.com Betreff: [2.6 patch] remove unused CONFIG_SK98LIN_T* Datum: 22/09/03 12:31 > > Current 2.6 contains a bunch of CONFIG_SK98LIN_T* options that are: > - used nowhere > - wrong, since the resulting varaibles are CONFIG_CONFIG_SK98LIN_T* > > The patch below removes these options. > > diffstat output: > > drivers/net/Kconfig | 134 -------------------------------------------- > 1 files changed, 134 deletions(-) > > > cu > Adrian > > --- linux-2.6.0-test5-mm4-no-smp-2.95/drivers/net/Kconfig.old 2003-09-22 14:02:17.000000000 +0200 > +++ linux-2.6.0-test5-mm4-no-smp-2.95/drivers/net/Kconfig 2003-09-22 14:03:53.000000000 +0200 > @@ -2118,140 +2118,6 @@ > say M here and read Documentation/modules.txt. This is recommended. > The module will be called sk98lin.o. > > -config CONFIG_SK98LIN_T1 > - bool "3Com 3C940/3C941 Gigabit Ethernet Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - 3Com 3C940 Gigabit LOM Ethernet Adapter > - - 3Com 3C941 Gigabit LOM Ethernet Adapter > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > -config CONFIG_SK98LIN_T2 > - bool "Allied Telesyn AT-29xx Gigabit Ethernet Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter > - - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter > - - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter > - - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter > - - Allied Telesyn AT-2971T Gigabit Ethernet Adapter > - - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter > - - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter > - - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > -config CONFIG_SK98LIN_T3 > - bool "CNet N-Way Gigabit Ethernet Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > -config CONFIG_SK98LIN_T4 > - bool "D-Link DGE-530T Gigabit Ethernet Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - DGE-530T Gigabit Ethernet Adapter > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > -config CONFIG_SK98LIN_T5 > - bool "Linksys EG10xx Ethernet Server Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - EG1032 v2 Instant Gigabit Network Adapter > - - EG1064 v2 Instant Gigabit Network Adapter > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > -config CONFIG_SK98LIN_T6 > - bool "Marvell RDK-80xx Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - Marvell RDK-8001 Adapter > - - Marvell RDK-8002 Adapter > - - Marvell RDK-8003 Adapter > - - Marvell RDK-8004 Adapter > - - Marvell RDK-8006 Adapter > - - Marvell RDK-8007 Adapter > - - Marvell RDK-8008 Adapter > - - Marvell RDK-8009 Adapter > - - Marvell RDK-8011 Adapter > - - Marvell RDK-8012 Adapter > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > -config CONFIG_SK98LIN_T7 > - bool "Marvell Yukon Gigabit Ethernet Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > -config CONFIG_SK98LIN_T8 > - bool "SysKonnect SK-98xx Server Gigabit Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) > - - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) > - - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) > - - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) > - - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) > - - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) > - - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) > - - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) > - - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) > - - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > -config CONFIG_SK98LIN_T9 > - bool "SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter" > - depends on SK98LIN > - help > - This driver supports: > - > - - SK-9521 V2.0 10/100/1000Base-T Adapter > - - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter > - - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter > - - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter > - - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter > - - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter > - - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter > - - SK-9521 10/100/1000Base-T Adapter > - > - Questions concerning this driver may be addressed to: > - linux@syskonnect.de > - > - > > config TIGON3 > tristate "Broadcom Tigon3 support" > > > <!DSPAM:3f6eeba0272221705448957> > > > > > ________________________________________________ Message sent using UebiMiau 2.7.2 - : send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
