Re: ADMtek AN983B (DEC Tulip compatible) nic problem (fix included)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 26 Apr 2002, Kurt Schäbig wrote:

> The Problem:
> The driver module for the DEC Tulip compatible nic does not recognize the
> ADMtek AN938B network controller, although it should.
> Neither does the v2.4 kernel module, nor does v2.5. The vendor says
> version 2.0.x kernels would have worked, but I did not test it.

The 9511 support was added to the tulip driver in v92n 11/3/2000, but the
tulip driver in the kernel does not have most of the improvements of the
past few years.

Use the driver at
   http://www.scyld.com/network/tulip.html
      ftp://www.scyld.com/pub/network/tulip.c

-- 
Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993

-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux