RE: change_mtu boundary checking error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



But Ethernet is not only for IP, what about other protocols ?

-----Original Message-----
From: Alan Cox [mailto:alan@lxorguk.ukuu.org.uk]
Sent: Tuesday, April 17, 2001 3:41 PM
To: shmulik.hen@intel.com
Cc: linux-net@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: Re: change_mtu boundary checking error


> Now, the high boundary seemed reasonable (ETH_FRAME_LEN - ETH_HLEN =
> ETH_DATA_LEN) which gives 1500, but why is the low boundary set to 68 ?
> According to my calculations, it should have been ETH_ZLEN - ETH_HLEN
which
> gives 46.

The IPv4 minimum MTU is 68 bytes. Below that not all frames can be delivered


-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org


[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux