On 27 Feb 01 at 17:34, J.R. de Jong wrote:
> # this attempts auto-configuration
> IPX_AUTO_PRIMARY=off
> IPX_AUTO_INTERFACE=off
> IPX_CONFIGURED=yes
> # for manual configuration, set IPX_CONFIGURED=yes,
> # and set the options below for your system
> IPX_DEVICE=eth0
> IPX_FRAME=802.2 # either 802.2, 802.3 or EtherII
> IPX_INTERNAL_NET=no
> IPX_NETNUM=001D8022 # your internal network number
Are you sure you are running this configuration? What says
cat /proc/net/ipx* ? Kernel should not forward anything if you have only
one frame configured... There are some IPX forwarding fixes in 2.4.2-acX,
btw.
Petr Vandrovec
vandrove@vc.cvut.cz
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
