Hi!
You can try with the D-Link DFE-550TX (Sundance driver) it reports the
link state to syslog.
-Jorge
==============================================================
Jorge Boncompte - Técnico de sistemas
DTI2 - Desarrollo de la Tecnología de las Comunicaciones
--------------------------------------------------------------
C/ Abogado Enriquez Barrios, 5 14004 CORDOBA (SPAIN)
Tlf: +34 957 761395 / FAX: +34 957 450380
--------------------------------------------------------------
jorge@dti2.net _-_-_-_-_-_-_-_-_-_-_-_-_-_ http://www.dti2.net
==============================================================
Without wicker a basket cannot be done.
==============================================================
----- Mensaje original -----
De: "Mircea Ciocan" <mirceac@interplus.ro>
Para: "linux-net" <linux-net@vger.kernel.org>
Enviado: jueves, 07 de diciembre de 2000 13:51
Asunto: Ethernet Drivers/NetCards that signals link failure
> Hi all,
>
> Sorry if this is somewere in FAQ, or other RTFM place, I didn't manage
> to find it :).
> In short I want to know if there is some kernel /proc parameter, patch,
> user program or other stuff ;) that can help me detect cable failures on
> some/all Ethernet boards, something like Cisco's "interface is down,
> line protocol is down, bla, bla".
> Any pointer will be appreciated.
>
> Thank you,
>
> Mircea C.
> -
> : send the line "unsubscribe linux-net" in
> the body of a message to majordomo@vger.kernel.org
>
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
