Re: interfacing a DTU with V.35 cable to a PC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 12 Jul 2000, Gregory Maxwell wrote:
> 
> You need a sync serial card, I've used cards by Sangoma with good luck
> before, and I've heard good things about COMX.

Another option is the Cyclades-PC300 card. If you're using Frame Relay,
Cisco HDLC, PPP or X.25, the PC300 may solve your problem.

More information about the card at:

http://www.cyclades.com/pc300.html

The model for V.35 interfaces is the PC300/RSV, but other models are also
available (PC300/X21 for X.21 interfaces, and PC300/TE for T1/E1
interfaces -- built-in DSU/CSU).

> Be forwarned, these cards are not cheap.

Well, when you compare it with the price of an external router, I don't
think they are so expensive ...

Hope this helps.

Regards,
Ivan

-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu


[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux