Re: [PATCH] mtd: rawnand: gpmi: fix reference count leak due to pm_runtime_get_sync

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

Hi Aditya,

Aditya Pakki <pakki001@xxxxxxx> wrote on Sat, 13 Jun 2020 22:43:00
-0500:

> On calling pm_runtime_get_sync() the reference count of the device
> is incremented. In case of failure, decrement the
> reference count before returning the error.
> 
> Signed-off-by: Aditya Pakki <pakki001@xxxxxxx>

Missing Fixes/Stable tags here I guess?

> ---
>  drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> index 061a8ddda275..657c0be5c038 100644
> --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> @@ -149,8 +149,10 @@ static int gpmi_init(struct gpmi_nand_data *this)
>  	int ret;
>  
>  	ret = pm_runtime_get_sync(this->dev);
> -	if (ret < 0)
> +	if (ret < 0) {
> +		pm_runtime_put_autosuspend(this->dev);
>  		return ret;
> +	}
>  
>  	ret = gpmi_reset_block(r->gpmi_regs, false);
>  	if (ret)
> @@ -2264,8 +2266,10 @@ static int gpmi_nfc_exec_op(struct nand_chip *chip,
>  		this->transfers[i].direction = DMA_NONE;
>  
>  	ret = pm_runtime_get_sync(this->dev);
> -	if (ret < 0)
> +	if (ret < 0) {
> +		pm_runtime_put_autosuspend(this->dev);
>  		return ret;
> +	}
>  
>  	/*
>  	 * This driver currently supports only one NAND chip. Plus, dies share

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/