On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Aditya Pakki <pakki001@xxxxxxx> --- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 061a8ddda275..657c0be5c038 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -149,8 +149,10 @@ static int gpmi_init(struct gpmi_nand_data *this) int ret; ret = pm_runtime_get_sync(this->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_autosuspend(this->dev); return ret; + } ret = gpmi_reset_block(r->gpmi_regs, false); if (ret) @@ -2264,8 +2266,10 @@ static int gpmi_nfc_exec_op(struct nand_chip *chip, this->transfers[i].direction = DMA_NONE; ret = pm_runtime_get_sync(this->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_autosuspend(this->dev); return ret; + } /* * This driver currently supports only one NAND chip. Plus, dies share -- 2.25.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/