Do not access the SDR timings directly but use nand_get_sdr_timings() instead. This way, future patching over this helper will be easier. Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- drivers/mtd/nand/raw/marvell_nand.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index 260a0430313e..ebf45a2754f1 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -1096,6 +1096,7 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip, const u8 *oob_buf, bool raw, int page) { + const struct nand_sdr_timings *sdr = nand_get_sdr_timings(&chip->data_interface); struct marvell_nand_chip *marvell_nand = to_marvell_nand(chip); struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; @@ -1140,8 +1141,7 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip, if (ret) return ret; - ret = marvell_nfc_wait_op(chip, - PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max)); + ret = marvell_nfc_wait_op(chip, PSEC_TO_MSEC(sdr->tPROG_max)); return ret; } @@ -1562,6 +1562,7 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip, const u8 *buf, int oob_required, int page) { + const struct nand_sdr_timings *sdr = nand_get_sdr_timings(&chip->data_interface); struct mtd_info *mtd = nand_to_mtd(chip); const struct marvell_hw_ecc_layout *lt = to_marvell_nand(chip)->layout; const u8 *data = buf; @@ -1598,8 +1599,7 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip, marvell_nfc_wait_ndrun(chip); } - ret = marvell_nfc_wait_op(chip, - PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max)); + ret = marvell_nfc_wait_op(chip, PSEC_TO_MSEC(sdr->tPROG_max)); marvell_nfc_disable_hw_ecc(chip); -- 2.20.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/