Re: [PATCH 1/2] ARM: pxa: remove Compulab pxa2xx boards

[Arnd Bergmann <arnd@xxxxxxxx>]

On Wed, May 20, 2020 at 12:22 PM Robert Jarzmik <robert.jarzmik@xxxxxxx> wrote:
> >
> > FB_MBX can still be selected, but there are no boards defining
> > the platform data any more, so I'd like to remove that as well.
> That should be dealt with another time, sorry.
>
> >> -static struct spi_board_info spi_board_info[] __initdata = {
> >> -       [0] = {
> >> -               .modalias       = "rtc-max6902",
> >> -               .max_speed_hz   = 1000000,
> >> -               .bus_num        = 1,
> >> -               .chip_select    = 0,
> >
> > Another last reference, so we can remove that the corresponding driver.
> Another patch serie for this as well.

Ok, no problem, as long as someone remembers to do it.

> > Same here, there is still one more user left (MACH_ZIPIT2), though
> > at some point that might get removed if we decide to drop the handhelds
> > with 32MB RAM or less.  That is probably something to be left for
> > another time, but I see that pxa_defconfig produces a 9.5MB kernel
> > image, so this is getting rather tight, and 32MB wasn't much when this
> > got added in 2010.
> Yeah, but no PXA user would ever use the pxa_defconfig kernel :)
> A typical kernel for a PXA board is right now around 4MB, which is very tight
> for 32MB platforms, and just enough for 64MB ones.

Makes sense.

      Arnd

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/