[PATCH v2 3/6] mtd: rawnand: atmel: Use nand_{write,read}_data_op()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use the nand_{write,read}_data_op() helpers instead of calling the
atmel_nand_{read,write}_buf() functions directly. This will ease the
transition to exec_op().

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
---
Changes in v2:
* New patch
---
 drivers/mtd/nand/raw/atmel/nand-controller.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 8e5cfb5cf70b..8be911ef9a6c 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -833,7 +833,7 @@ static int atmel_nand_pmecc_write_pg(struct nand_chip *chip, const u8 *buf,
 	if (ret)
 		return ret;
 
-	atmel_nand_write_buf(chip, buf, mtd->writesize);
+	nand_write_data_op(chip, buf, mtd->writesize, false);
 
 	ret = atmel_nand_pmecc_generate_eccbytes(chip, raw);
 	if (ret) {
@@ -843,7 +843,7 @@ static int atmel_nand_pmecc_write_pg(struct nand_chip *chip, const u8 *buf,
 
 	atmel_nand_pmecc_disable(chip, raw);
 
-	atmel_nand_write_buf(chip, chip->oob_poi, mtd->oobsize);
+	nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, false);
 
 	return nand_prog_page_end_op(chip);
 }
@@ -873,8 +873,8 @@ static int atmel_nand_pmecc_read_pg(struct nand_chip *chip, u8 *buf,
 	if (ret)
 		return ret;
 
-	atmel_nand_read_buf(chip, buf, mtd->writesize);
-	atmel_nand_read_buf(chip, chip->oob_poi, mtd->oobsize);
+	nand_read_data_op(chip, buf, mtd->writesize, false);
+	nand_read_data_op(chip, chip->oob_poi, mtd->oobsize, false);
 
 	ret = atmel_nand_pmecc_correct_data(chip, buf, raw);
 
@@ -934,7 +934,7 @@ static int atmel_hsmc_nand_pmecc_write_pg(struct nand_chip *chip,
 	if (ret)
 		return ret;
 
-	atmel_nand_write_buf(chip, chip->oob_poi, mtd->oobsize);
+	nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, false);
 
 	nc->op.cmds[0] = NAND_CMD_PAGEPROG;
 	nc->op.ncmds = 1;
-- 
2.25.3


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux