On 2/6/2020 11:30 AM, Kamal Dasu wrote: > Zephyr secondary cache is 256KB, 128B lines. 32B sectors. A secondary cache > line can contain two instruction cache lines (64B), or four data cache > lines (32B). Hardware prefetch Cache detects stream access, and prefetches > ahead of processor access. Add support to inavalidate BMIPS5000 cpu zephyr s/inavalidate/invalidate/ > secondary cache module (ZSCM) on DMA from device so that data returned is > coherent during DMA read operations. Just a few nits, see below, with those addressed: Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> > > Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx> > --- > arch/mips/mm/c-r4k.c | 30 ++++++++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c > index 5f3d0103b95d..2d8892ba68ab 100644 > --- a/arch/mips/mm/c-r4k.c > +++ b/arch/mips/mm/c-r4k.c > @@ -901,6 +901,35 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size) > __sync(); > } > > +static void prefetch_cache_inv(unsigned long addr, unsigned long size) > +{ > + unsigned int linesz = cpu_scache_line_size(); > + unsigned long addr0 = addr, addr1; > + int cpu_type = current_cpu_type(); > + > + if (cpu_type == CPU_BMIPS5000) { I would re-organize this and move this out of the prefetch_cache_inv() such that platforms which do not require that operation can have it optimized out, see below: > + /* invalidate zephyr secondary cache module prefetch lines */ > + addr0 &= ~(linesz - 1); > + addr1 = (addr0 + size - 1) & ~(linesz - 1); > + > + protected_writeback_scache_line(addr0); > + if (likely(addr1 != addr0)) > + protected_writeback_scache_line(addr1); > + else > + return; > + > + addr0 += linesz; > + if (likely(addr1 != addr0)) > + protected_writeback_scache_line(addr0); > + else > + return; > + > + addr1 -= linesz; > + if (likely(addr1 > addr0)) > + protected_writeback_scache_line(addr0); > + } > +} > + > static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) > { > /* Catch bad driver code */ > @@ -908,6 +937,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) > return; > > preempt_disable(); if (current_cpu_type() == CPU_BMIPS5000) prefetch_cache_inv(addr, size); > + prefetch_cache_inv(addr, size); > if (cpu_has_inclusive_pcaches) { > if (size >= scache_size) { > if (current_cpu_type() != CPU_LOONGSON64) > -- Florian ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/