Zephyr secondary cache is 256KB, 128B lines. 32B sectors. A secondary cache line can contain two instruction cache lines (64B), or four data cache lines (32B). Hardware prefetch Cache detects stream access, and prefetches ahead of processor access. Add support to inavalidate BMIPS5000 cpu zephyr secondary cache module (ZSCM) on DMA from device so that data returned is coherent during DMA read operations. Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx> --- arch/mips/mm/c-r4k.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 5f3d0103b95d..2d8892ba68ab 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -901,6 +901,35 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size) __sync(); } +static void prefetch_cache_inv(unsigned long addr, unsigned long size) +{ + unsigned int linesz = cpu_scache_line_size(); + unsigned long addr0 = addr, addr1; + int cpu_type = current_cpu_type(); + + if (cpu_type == CPU_BMIPS5000) { + /* invalidate zephyr secondary cache module prefetch lines */ + addr0 &= ~(linesz - 1); + addr1 = (addr0 + size - 1) & ~(linesz - 1); + + protected_writeback_scache_line(addr0); + if (likely(addr1 != addr0)) + protected_writeback_scache_line(addr1); + else + return; + + addr0 += linesz; + if (likely(addr1 != addr0)) + protected_writeback_scache_line(addr0); + else + return; + + addr1 -= linesz; + if (likely(addr1 > addr0)) + protected_writeback_scache_line(addr0); + } +} + static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) { /* Catch bad driver code */ @@ -908,6 +937,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) return; preempt_disable(); + prefetch_cache_inv(addr, size); if (cpu_has_inclusive_pcaches) { if (size >= scache_size) { if (current_cpu_type() != CPU_LOONGSON64) -- 2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/