Re: [PATCH] mtd: spi-nor: Fixup page size for S25FS-S

[John Garry <john.garry@xxxxxxxxxx>]

On 14/01/2020 13:47, Alexander X Sverdlin wrote:
> From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
>
> Spansion S25FS-S family has an issue in Basic Flash Parameter Table:
> DWORD-11 bits 7-4 specify write page size 512 bytes. In reality this
> is configurable in the non-volatile CR3NV register and even factory
> default configuration is "wrap at 256 bytes". So blind relying on BFPT
> breaks write operation on these Flashes.
>
> All this story is vendor-specific, so add the corresponding fixup hook
> which first restores the safe page size of 256 bytes from
> struct flash_info but checks is more performant 512 bytes configuration
> is active and adjusts the page_size accordingly.

Hi Alexander,

One of my dev boards has part s25fl129p1, so I would like to try this 
patch. However it does not apply. Any chance you could resend?

Thanks
John

> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: f384b352c ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables")
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
> ---
>   drivers/mtd/spi-nor/spi-nor.c | 39 +++++++++++++++++++++++++++++++++++++--
>   include/linux/mtd/spi-nor.h   |  5 +++++
>   2 files changed, 42 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 73172d7..18f8705 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1711,6 +1711,39 @@ static struct spi_nor_fixups mx25l25635_fixups = {
>   	.post_bfpt = mx25l25635_post_bfpt_fixups,
>   };
>   
> +/* Spansion S25FS-S SFDP workarounds */
> +static int s25fs_s_post_bfpt_fixups(struct spi_nor *nor,
> +	const struct sfdp_parameter_header *bfpt_header,
> +	const struct sfdp_bfpt *bfpt,
> +	struct spi_nor_flash_parameter *params)
> +{
> +	const struct flash_info *info = nor->info;
> +	u8 read_opcode, buf;
> +	int ret;
> +
> +	/* Default is safe */
> +	params->page_size = info->page_size;
> +
> +	/*
> +	 * But is the chip configured for more performant 512 bytes write page
> +	 * size?
> +	 */
> +	read_opcode = nor->read_opcode;
> +
> +	nor->read_opcode = SPINOR_OP_RDAR;
> +	ret = nor->read(nor, SPINOR_REG_CR3V, 1, &buf);

struct spi_nor has no member .read AFAICS.

> +	if (!ret && (buf & CR3V_02H_V))
> +		params->page_size = 512;
> +
> +	nor->read_opcode = read_opcode;
> +
> +	return ret;
> +}
> +
> +static const struct spi_nor_fixups s25fs_s_fixups = {
> +	.post_bfpt = s25fs_s_post_bfpt_fixups,
> +};
> +
>   /* NOTE: double check command sets and memory organization when you add
>    * more nor chips.  This current list focusses on newer chips, which
>    * have been converging on command sets which including JEDEC ID.
> @@ -1903,7 +1936,8 @@ static const struct flash_info spi_nor_ids[] = {
>   			SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
>   	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
>   			SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> -	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
> +	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR)
> +			.fixups = &s25fs_s_fixups, },
>   	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
>   	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
>   			SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> @@ -1913,7 +1947,8 @@ static const struct flash_info spi_nor_ids[] = {
>   	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
>   	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
>   	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> -	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> +	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
> +			.fixups = &s25fs_s_fixups, },
>   	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
>   	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
>   	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index b3d360b..222eee9 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -114,6 +114,7 @@
>   /* Used for Spansion flashes only. */
>   #define SPINOR_OP_BRWR		0x17	/* Bank register write */
>   #define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
> +#define SPINOR_OP_RDAR		0x65	/* Read Any Register */
>   
>   /* Used for Micron flashes only. */
>   #define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
> @@ -149,6 +150,10 @@
>   /* Status Register 2 bits. */
>   #define SR2_QUAD_EN_BIT7	BIT(7)
>   
> +/* Used for Spansion flashes RDAR command only. */
> +#define SPINOR_REG_CR3V		0x800004
> +#define CR3V_02H_V		BIT(4)	/* Page Buffer Wrap */
> +
>   /* Supported SPI protocols */
>   #define SNOR_PROTO_INST_MASK	GENMASK(23, 16)
>   #define SNOR_PROTO_INST_SHIFT	16


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/