Re: mtd_nandbiterrs errors

[JH <jupiter.hce@xxxxxxxxx>]

Resolved, using kernel test probably a bad idea, change to use
mtd-utils nandbiterrs resolved issue.

Thank you.

Kind regards,

- jh

On 2/4/20, JH <jupiter.hce@xxxxxxxxx> wrote:
> Hi,
>
> I am running kernel version 4.19.75 on iMX6, here I got problem to run
> mtd_nandbiterrs:
>
> # modprobe mtd_nandbiterrs
> [  695.090585]
> [  695.092143] ==================================================
> [  695.098317] mtd_nandbiterrs: MTD device: 0
> [  695.114256] mtd_nandbiterrs: MTD device size 1048576, eraseblock=131072,
> pag4
> [  695.122867] mtd_nandbiterrs: Device uses 1 subpages of 2048 bytes
> [  695.129138] mtd_nandbiterrs: Using page=0, offset=0, eraseblock=0
> [  695.144888] mtd_nandbiterrs: incremental biterrors test
> [  695.150594] mtd_nandbiterrs: write_page
> [  695.158629] mtd_nandbiterrs: rewrite page
> [  695.163488] mtd_nandbiterrs: read_page
> [  695.170790] mtd_nandbiterrs: verify_page
> [  695.174887] mtd_nandbiterrs: Successfully corrected 0 bit errors per
> subpage
> [  695.182279] mtd_nandbiterrs: Inserted biterror @ 0/5
> [  695.187387] mtd_nandbiterrs: rewrite page
> [  695.196243] mtd_nandbiterrs: read_page
> [  695.202608] mtd_nandbiterrs: Read reported 1 corrected bit errors
> [  695.209115] mtd_nandbiterrs: verify_page
> [  695.213192] mtd_nandbiterrs: Successfully corrected 1 bit errors per
> subpage
> [  695.220361] mtd_nandbiterrs: Inserted biterror @ 0/2
> [  695.225361] mtd_nandbiterrs: rewrite page
> [  695.235261] mtd_nandbiterrs: read_page
> [  695.240237] mtd_nandbiterrs: Read reported 2 corrected bit errors
> [  695.246384] mtd_nandbiterrs: verify_page
> [  695.250771] mtd_nandbiterrs: Successfully corrected 2 bit errors per
> subpage
> [  695.257984] mtd_nandbiterrs: Inserted biterror @ 0/0
> [  695.262984] mtd_nandbiterrs: rewrite page
> [  695.273646] mtd_nandbiterrs: read_page
> [  695.280000] mtd_nandbiterrs: Read reported 2 corrected bit errors
> [  695.286230] mtd_nandbiterrs: verify_page
> [  695.290489] mtd_nandbiterrs: Error: page offset 0, expected 25, got 00
> [  695.297155] mtd_nandbiterrs: Error: page offset 282, expected 29, got 28
> [  695.303897] mtd_nandbiterrs: Error: page offset 359, expected a7, got 27
> [  695.310834] mtd_nandbiterrs: ECC failure, read data is incorrect despite
> reas
> modprobe: ERROR: could not insert 'mtd_nandbiterrs': Input/output error
>
> What I got wrong here?
>
> Thank you.
>
> Kind regards,
>
> - jh
>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/