Hi Esben, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote on Wed, 15 Jan 2020 08:46:22 +0100: > Hi Esben, > > On Thu, Jan 02, 2020 at 02:08:25PM +0100, Esben Haabendal wrote: > > On system resume, the gpmi clock must be enabled before accessing gpmi > > block. Without this, resume causes something like > > > > [ 661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout > > [ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110 > > [ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110 > > [ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110 > > > > Signed-off-by: Esben Haabendal <esben@xxxxxxxxxx> > > --- > > drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c > > index 334fe3130285..7ac8c8b95afc 100644 > > --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c > > +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c > > @@ -148,6 +148,10 @@ static int gpmi_init(struct gpmi_nand_data *this) > > struct resources *r = &this->resources; > > int ret; > > > > + ret = pm_runtime_get_sync(this->dev); > > + if (ret < 0) > > + return ret; > > This increases the devices usage counter... I'm dropping the two patches for now, please resend with this fixed and the Fixes/Cc:stable tags added. I'll freeze the PR at the end of the week. > > + > > ret = gpmi_reset_block(r->gpmi_regs, false); > > if (ret) > > goto err_out; > > @@ -181,6 +185,8 @@ static int gpmi_init(struct gpmi_nand_data *this) > > > > return 0; > > ... but doesn't decrease it in the success case. This means this patch > effectively disables runtime pm. You should fall through here as fixed > in Han Xus patch. > > > err_out: > > + pm_runtime_mark_last_busy(this->dev); > > + pm_runtime_put_autosuspend(this->dev); > > return ret; > > Sascha > Thanks, Miquèl ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/