From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> Extend the Quad Enable Read Back test to the entire Status Register byte. Make sure that other bits were not changed. Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> --- drivers/mtd/spi-nor/spi-nor.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 0dcc4f12e4de..55a12a1d710e 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -2047,20 +2047,7 @@ static int macronix_quad_enable(struct spi_nor *nor) nor->bouncebuf[0] |= SR_QUAD_EN_MX; - ret = spi_nor_write_sr(nor, &nor->bouncebuf[0], 1); - if (ret) - return ret; - - ret = spi_nor_read_sr(nor, &nor->bouncebuf[0]); - if (ret) - return ret; - - if (!(nor->bouncebuf[0] & SR_QUAD_EN_MX)) { - dev_err(nor->dev, "Macronix Quad bit not set\n"); - return -EIO; - } - - return 0; + return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]); } /** @@ -2108,6 +2095,7 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) { u8 *sr_cr = nor->bouncebuf; int ret; + u8 sr_written; /* Check current Quad Enable bit value. */ ret = spi_nor_read_cr(nor, &sr_cr[1]); @@ -2128,13 +2116,15 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) if (ret) return ret; + sr_written = sr_cr[1]; + /* Read back and check it. */ ret = spi_nor_read_cr(nor, &sr_cr[1]); if (ret) return ret; - if (!(sr_cr[1] & CR_QUAD_EN_SPAN)) { - dev_err(nor->dev, "Spansion Quad bit not set\n"); + if (sr_cr[1] != sr_written) { + dev_err(nor->dev, "SR2: Read back test failed\n"); return -EIO; } @@ -2157,6 +2147,7 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor) { u8 *sr2 = nor->bouncebuf; int ret; + u8 sr2_written; /* Check current Quad Enable bit value. */ ret = spi_nor_read_sr2(nor, sr2); @@ -2172,13 +2163,15 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor) if (ret) return ret; + sr2_written = *sr2; + /* Read back and check it. */ ret = spi_nor_read_sr2(nor, sr2); if (ret) return ret; - if (!(*sr2 & SR2_QUAD_EN_BIT7)) { - dev_err(nor->dev, "SR2 Quad bit not set\n"); + if (*sr2 != sr2_written) { + dev_err(nor->dev, "Read back test failed\n"); return -EIO; } -- 2.9.5 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/